PostScript printer with Windows 2008 server x64 and Vista x32. p&p

  • Thread starter Thread starter Robin
  • Start date Start date
R

Robin

Guest
I try to use a point and print process with a Windows 2008 server x64 to a
Windows Vista 32. So first I need to install the x64 driver and then install
the x86 driver. The x64 driver is installed without problem. But when we try
to install the x86 driver (I try by using different methods, using
\\PrintServerName\Printers,
Printer management on server 2008...) At each time, when I try to
install the PS printer x86 driver an error message saying "Unable to
install PS3 type 3 User Mode, x86 driver. This opération is not supported"

The PostScript driver is just an inf file + a PPD file. It seems that the
driver used is the core x64 driver, and it's impossible to use the 32 bit PS
core.

So my question: how to use the PostScript core driver from server 2008 x64
to perform a point and print process with a Windows Vista X32 ?
to summarize: the x64 server core Postscript driver contents just the x64
files nothing for x32....

Many thanks by advance for your help.
 
Re: PostScript printer with Windows 2008 server x64 and Vista x32. p&p

You will need to install the 32bit driver with the exact same name as the 64
bit driver. I'm assuming this is a Lexmark driver from the PS3 name.

The inf file has a NEEDS and INCLUDES section of the inf pointing to the
core ps files. When the client is 64bit, the inf can only find the 64bit
files and the installation will fail.

The easiest way to add the 32bit drivers to the 64bit server is to use a
32bit client to remotely add the driver since a 64 client does not have the
32bit drivers.

You can also copy all the required 32 bit files to an installation path and
install using any client. You will need ntprint.inf, ntprint.cat from 32bit
as will as the required driver files.

I use several other methods as well but I do this all the time so I know how
to work my way through all the file prompts. Read these and understand them
so you point to the proper files as requested.



--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"Robin" <Robin@discussions.microsoft.com> wrote in message
news:67D89CB7-0B20-4F76-8C95-DCFB0A2AE46A@microsoft.com...
>I try to use a point and print process with a Windows 2008 server x64 to a
> Windows Vista 32. So first I need to install the x64 driver and then
> install
> the x86 driver. The x64 driver is installed without problem. But when we
> try
> to install the x86 driver (I try by using different methods, using
> \\PrintServerName\Printers,
> Printer management on server 2008...) At each time, when I try to
> install the PS printer x86 driver an error message saying "Unable to
> install PS3 type 3 User Mode, x86 driver. This opération is not supported"
>
> The PostScript driver is just an inf file + a PPD file. It seems that the
> driver used is the core x64 driver, and it's impossible to use the 32 bit
> PS
> core.
>
> So my question: how to use the PostScript core driver from server 2008 x64
> to perform a point and print process with a Windows Vista X32 ?
> to summarize: the x64 server core Postscript driver contents just the x64
> files nothing for x32....
>
> Many thanks by advance for your help.
>
 
Re: PostScript printer with Windows 2008 server x64 and Vista x32.

Re: PostScript printer with Windows 2008 server x64 and Vista x32.

Hi Alan,

Many thanks for your prompt reply.
Useful information inside the response but I want to use point and print
process (like drag and drop the share printer). So below cannot be applied:
"> You can also copy all the required 32 bit files to an installation path
and
> install using any client. You will need ntprint.inf, ntprint.cat from 32bit
> as will as the required driver files."

And:"> The easiest way to add the 32bit drivers to the 64bit server is to
use a
> 32bit client to remotely add the driver since a 64 client does not have the
> 32bit drivers." Doesn't work because the PS driver is include inside the OS, and Windows server 2008 doesn't accept to copy core PS driver from a remote PC....

Strange isn't it... So if you have another idea... You're welcome.
Many thanks and best regards.
Robin


"Alan Morris [MSFT]" wrote:

> You will need to install the 32bit driver with the exact same name as the 64
> bit driver. I'm assuming this is a Lexmark driver from the PS3 name.
>
> The inf file has a NEEDS and INCLUDES section of the inf pointing to the
> core ps files. When the client is 64bit, the inf can only find the 64bit
> files and the installation will fail.
>
> The easiest way to add the 32bit drivers to the 64bit server is to use a
> 32bit client to remotely add the driver since a 64 client does not have the
> 32bit drivers.
>
> You can also copy all the required 32 bit files to an installation path and
> install using any client. You will need ntprint.inf, ntprint.cat from 32bit
> as will as the required driver files.
>
> I use several other methods as well but I do this all the time so I know how
> to work my way through all the file prompts. Read these and understand them
> so you point to the proper files as requested.
>
>
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/search/?adv=1
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Robin" <Robin@discussions.microsoft.com> wrote in message
> news:67D89CB7-0B20-4F76-8C95-DCFB0A2AE46A@microsoft.com...
> >I try to use a point and print process with a Windows 2008 server x64 to a
> > Windows Vista 32. So first I need to install the x64 driver and then
> > install
> > the x86 driver. The x64 driver is installed without problem. But when we
> > try
> > to install the x86 driver (I try by using different methods, using
> > \\PrintServerName\Printers,
> > Printer management on server 2008...) At each time, when I try to
> > install the PS printer x86 driver an error message saying "Unable to
> > install PS3 type 3 User Mode, x86 driver. This opération is not supported"
> >
> > The PostScript driver is just an inf file + a PPD file. It seems that the
> > driver used is the core x64 driver, and it's impossible to use the 32 bit
> > PS
> > core.
> >
> > So my question: how to use the PostScript core driver from server 2008 x64
> > to perform a point and print process with a Windows Vista X32 ?
> > to summarize: the x64 server core Postscript driver contents just the x64
> > files nothing for x32....
> >
> > Many thanks by advance for your help.
> >
>
>
>
 
Re: PostScript printer with Windows 2008 server x64 and Vista x32.

Re: PostScript printer with Windows 2008 server x64 and Vista x32.

I do this at least once a week, it works.

The client absolutely will copy the x86 driver files and install them to
x64.

Select an inbox x86 Vista SP1 driver and add this to the remote x64 Server
2008 machine.

At this point do you receive an error?


I suspect the inf file is not decorated but Lexmark has been okay following
this requirement (unless the driver is over two years old).

An alternative is to add the x86 driver(s) to an x86 Vista SP1 machine that
does not have a bunch of printers and drivers. Use printbrmui.exe on Vista
Ultimate or Business to backup the x86 client machine (Server 2008 has the
print backup tool as well).

Then restore the x86 backup to the x64 server.
--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"Robin" <Robin@discussions.microsoft.com> wrote in message
news:EA4A1814-A935-4771-A46B-D774EC11EDEE@microsoft.com...
> Hi Alan,
>
> Many thanks for your prompt reply.
> Useful information inside the response but I want to use point and print
> process (like drag and drop the share printer). So below cannot be
> applied:
> "> You can also copy all the required 32 bit files to an installation path
> and
>> install using any client. You will need ntprint.inf, ntprint.cat from
>> 32bit
>> as will as the required driver files."
>
> And:"> The easiest way to add the 32bit drivers to the 64bit server is to
> use a
>> 32bit client to remotely add the driver since a 64 client does not have
>> the
>> 32bit drivers." Doesn't work because the PS driver is include inside the
>> OS, and Windows server 2008 doesn't accept to copy core PS driver from a
>> remote PC....
>
> Strange isn't it... So if you have another idea... You're welcome.
> Many thanks and best regards.
> Robin
>
>
> "Alan Morris [MSFT]" wrote:
>
>> You will need to install the 32bit driver with the exact same name as the
>> 64
>> bit driver. I'm assuming this is a Lexmark driver from the PS3 name.
>>
>> The inf file has a NEEDS and INCLUDES section of the inf pointing to the
>> core ps files. When the client is 64bit, the inf can only find the 64bit
>> files and the installation will fail.
>>
>> The easiest way to add the 32bit drivers to the 64bit server is to use a
>> 32bit client to remotely add the driver since a 64 client does not have
>> the
>> 32bit drivers.
>>
>> You can also copy all the required 32 bit files to an installation path
>> and
>> install using any client. You will need ntprint.inf, ntprint.cat from
>> 32bit
>> as will as the required driver files.
>>
>> I use several other methods as well but I do this all the time so I know
>> how
>> to work my way through all the file prompts. Read these and understand
>> them
>> so you point to the proper files as requested.
>>
>>
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/search/?adv=1
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Robin" <Robin@discussions.microsoft.com> wrote in message
>> news:67D89CB7-0B20-4F76-8C95-DCFB0A2AE46A@microsoft.com...
>> >I try to use a point and print process with a Windows 2008 server x64 to
>> >a
>> > Windows Vista 32. So first I need to install the x64 driver and then
>> > install
>> > the x86 driver. The x64 driver is installed without problem. But when
>> > we
>> > try
>> > to install the x86 driver (I try by using different methods, using
>> > \\PrintServerName\Printers,
>> > Printer management on server 2008...) At each time, when I try to
>> > install the PS printer x86 driver an error message saying "Unable to
>> > install PS3 type 3 User Mode, x86 driver. This opération is not
>> > supported"
>> >
>> > The PostScript driver is just an inf file + a PPD file. It seems that
>> > the
>> > driver used is the core x64 driver, and it's impossible to use the 32
>> > bit
>> > PS
>> > core.
>> >
>> > So my question: how to use the PostScript core driver from server 2008
>> > x64
>> > to perform a point and print process with a Windows Vista X32 ?
>> > to summarize: the x64 server core Postscript driver contents just the
>> > x64
>> > files nothing for x32....
>> >
>> > Many thanks by advance for your help.
>> >
>>
>>
>>
 
Re: PostScript printer with Windows 2008 server x64 and Vista x32.

Re: PostScript printer with Windows 2008 server x64 and Vista x32.

Many thanks Alan for your reponse, it works now thanks to you by using the
tool: printbrmui.Exe.
Best regards. And again thank you very much !!!!

"Alan Morris [MSFT]" wrote:

> I do this at least once a week, it works.
>
> The client absolutely will copy the x86 driver files and install them to
> x64.
>
> Select an inbox x86 Vista SP1 driver and add this to the remote x64 Server
> 2008 machine.
>
> At this point do you receive an error?
>
>
> I suspect the inf file is not decorated but Lexmark has been okay following
> this requirement (unless the driver is over two years old).
>
> An alternative is to add the x86 driver(s) to an x86 Vista SP1 machine that
> does not have a bunch of printers and drivers. Use printbrmui.exe on Vista
> Ultimate or Business to backup the x86 client machine (Server 2008 has the
> print backup tool as well).
>
> Then restore the x86 backup to the x64 server.
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/search/?adv=1
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Robin" <Robin@discussions.microsoft.com> wrote in message
> news:EA4A1814-A935-4771-A46B-D774EC11EDEE@microsoft.com...
> > Hi Alan,
> >
> > Many thanks for your prompt reply.
> > Useful information inside the response but I want to use point and print
> > process (like drag and drop the share printer). So below cannot be
> > applied:
> > "> You can also copy all the required 32 bit files to an installation path
> > and
> >> install using any client. You will need ntprint.inf, ntprint.cat from
> >> 32bit
> >> as will as the required driver files."
> >
> > And:"> The easiest way to add the 32bit drivers to the 64bit server is to
> > use a
> >> 32bit client to remotely add the driver since a 64 client does not have
> >> the
> >> 32bit drivers." Doesn't work because the PS driver is include inside the
> >> OS, and Windows server 2008 doesn't accept to copy core PS driver from a
> >> remote PC....
> >
> > Strange isn't it... So if you have another idea... You're welcome.
> > Many thanks and best regards.
> > Robin
> >
> >
> > "Alan Morris [MSFT]" wrote:
> >
> >> You will need to install the 32bit driver with the exact same name as the
> >> 64
> >> bit driver. I'm assuming this is a Lexmark driver from the PS3 name.
> >>
> >> The inf file has a NEEDS and INCLUDES section of the inf pointing to the
> >> core ps files. When the client is 64bit, the inf can only find the 64bit
> >> files and the installation will fail.
> >>
> >> The easiest way to add the 32bit drivers to the 64bit server is to use a
> >> 32bit client to remotely add the driver since a 64 client does not have
> >> the
> >> 32bit drivers.
> >>
> >> You can also copy all the required 32 bit files to an installation path
> >> and
> >> install using any client. You will need ntprint.inf, ntprint.cat from
> >> 32bit
> >> as will as the required driver files.
> >>
> >> I use several other methods as well but I do this all the time so I know
> >> how
> >> to work my way through all the file prompts. Read these and understand
> >> them
> >> so you point to the proper files as requested.
> >>
> >>
> >>
> >> --
> >> Alan Morris
> >> Windows Printing Team
> >> Search the Microsoft Knowledge Base here:
> >> http://support.microsoft.com/search/?adv=1
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "Robin" <Robin@discussions.microsoft.com> wrote in message
> >> news:67D89CB7-0B20-4F76-8C95-DCFB0A2AE46A@microsoft.com...
> >> >I try to use a point and print process with a Windows 2008 server x64 to
> >> >a
> >> > Windows Vista 32. So first I need to install the x64 driver and then
> >> > install
> >> > the x86 driver. The x64 driver is installed without problem. But when
> >> > we
> >> > try
> >> > to install the x86 driver (I try by using different methods, using
> >> > \\PrintServerName\Printers,
> >> > Printer management on server 2008...) At each time, when I try to
> >> > install the PS printer x86 driver an error message saying "Unable to
> >> > install PS3 type 3 User Mode, x86 driver. This opération is not
> >> > supported"
> >> >
> >> > The PostScript driver is just an inf file + a PPD file. It seems that
> >> > the
> >> > driver used is the core x64 driver, and it's impossible to use the 32
> >> > bit
> >> > PS
> >> > core.
> >> >
> >> > So my question: how to use the PostScript core driver from server 2008
> >> > x64
> >> > to perform a point and print process with a Windows Vista X32 ?
> >> > to summarize: the x64 server core Postscript driver contents just the
> >> > x64
> >> > files nothing for x32....
> >> >
> >> > Many thanks by advance for your help.
> >> >
> >>
> >>
> >>
>
>
>
 
Back
Top