A
Arran
Guest
System restore is turned on, but I can not restore to any point. Can any one
help me sort out this problem.
help me sort out this problem.
K
Ken Blake, MVP
Guest
Re: System restore not working
On Sun, 5 Oct 2008 11:08:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> System restore is turned on, but I can not restore to any point. Can any one
> help me sort out this problem.
Please tell us exactly what you do to try to restore, and exactly what
happens when you try, including the exact verbatim text of any
messages you receive.
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
On Sun, 5 Oct 2008 11:08:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> System restore is turned on, but I can not restore to any point. Can any one
> help me sort out this problem.
Please tell us exactly what you do to try to restore, and exactly what
happens when you try, including the exact verbatim text of any
messages you receive.
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
R
Ronaldo
Guest
Re: System restore not working
Go to Start\Run\ type; "regedit" (no quotes), hit Enter, and check that your
registry keys and values settings are as specified in the KB29569 article.
The Registry Keys and Values for the System Restore Utility
http://support.microsoft.com/kb/295659
---------------------
"Arran" <Arran@discussions.microsoft.com> escribió en el mensaje
news
2AAED58-CAA5-407E-850B-647194B81F86@microsoft.com...
> System restore is turned on, but I can not restore to any point. Can any
> one
> help me sort out this problem.
Go to Start\Run\ type; "regedit" (no quotes), hit Enter, and check that your
registry keys and values settings are as specified in the KB29569 article.
The Registry Keys and Values for the System Restore Utility
http://support.microsoft.com/kb/295659
---------------------
"Arran" <Arran@discussions.microsoft.com> escribió en el mensaje
news
2AAED58-CAA5-407E-850B-647194B81F86@microsoft.com...> System restore is turned on, but I can not restore to any point. Can any
> one
> help me sort out this problem.
N
nass
Guest
RE: System restore not working
"Arran" wrote:
> System restore is turned on, but I can not restore to any point. Can any one
> help me sort out this problem.
Try System Restore to an earlier date By Disabling your Anti-virus then
restart in Safe Mode by tapping the F8 on start
Up until you get the Boot up options and select Safe Mode.
In safe Mode click Start >> All programs >> Accessories >> System Tools >>
System Restore and pick up a Restore point to restore your system.
It will do the reboot and the rstore will procedure pay attention to it and
see if it was successful or not.
Do n't forget to Enable your Anti-virus after a successful Restore and
hopefully it will also resolved your problem.
HTH,
nass
--
http://www.nasstec.co.uk
"Arran" wrote:
> System restore is turned on, but I can not restore to any point. Can any one
> help me sort out this problem.
Try System Restore to an earlier date By Disabling your Anti-virus then
restart in Safe Mode by tapping the F8 on start
Up until you get the Boot up options and select Safe Mode.
In safe Mode click Start >> All programs >> Accessories >> System Tools >>
System Restore and pick up a Restore point to restore your system.
It will do the reboot and the rstore will procedure pay attention to it and
see if it was successful or not.
Do n't forget to Enable your Anti-virus after a successful Restore and
hopefully it will also resolved your problem.
HTH,
nass
--
http://www.nasstec.co.uk
G
Gerry
Guest
Re: System restore not working
What security software is installed?
http://bertk.mvps.org/html/srfail.html
Not all problem software is mentioned here as the list is growing.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
Arran wrote:
> System restore is turned on, but I can not restore to any point. Can
> any one help me sort out this problem.
What security software is installed?
http://bertk.mvps.org/html/srfail.html
Not all problem software is mentioned here as the list is growing.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
Arran wrote:
> System restore is turned on, but I can not restore to any point. Can
> any one help me sort out this problem.
A
Arran
Guest
Re: System restore not working
Ken thanks for reply
It was working the in the past!
Access it via System Tools > System Restore. There are plenty of points to
select from but they all end up with the Message ' your computer cannot be
restored to ****. No changes have been made'
I am fast running out of time for me to restore to what I believe to be a
good point in July.
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > System restore is turned on, but I can not restore to any point. Can any one
> > help me sort out this problem.
>
>
> Please tell us exactly what you do to try to restore, and exactly what
> happens when you try, including the exact verbatim text of any
> messages you receive.
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
Ken thanks for reply
It was working the in the past!
Access it via System Tools > System Restore. There are plenty of points to
select from but they all end up with the Message ' your computer cannot be
restored to ****. No changes have been made'
I am fast running out of time for me to restore to what I believe to be a
good point in July.
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > System restore is turned on, but I can not restore to any point. Can any one
> > help me sort out this problem.
>
>
> Please tell us exactly what you do to try to restore, and exactly what
> happens when you try, including the exact verbatim text of any
> messages you receive.
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
K
Ken Blake, MVP
Guest
Re: System restore not working
On Sun, 5 Oct 2008 12:06:04 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> Ken thanks for reply
> It was working the in the past!
> Access it via System Tools > System Restore. There are plenty of points to
> select from but they all end up with the Message ' your computer cannot be
> restored to ****. No changes have been made'
> I am fast running out of time for me to restore to what I believe to be a
> good point in July.
You're welcome. I can't personally help with the problem, but I
recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
Moreover, I don't think going to a restore point as far back as July
is a good idea. I recommend a week or two's worth of restore points,
but the number you get with XP's default allocation is too large. If
you go back too far, you tend to get the registry out of synch with
other files on the drive, so three months worth of restore points
aren't really useful, and going to a three month old restore point is
likely to create problems for you.
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > System restore is turned on, but I can not restore to any point. Can any one
> > > help me sort out this problem.
> >
> >
> > Please tell us exactly what you do to try to restore, and exactly what
> > happens when you try, including the exact verbatim text of any
> > messages you receive.
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
On Sun, 5 Oct 2008 12:06:04 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> Ken thanks for reply
> It was working the in the past!
> Access it via System Tools > System Restore. There are plenty of points to
> select from but they all end up with the Message ' your computer cannot be
> restored to ****. No changes have been made'
> I am fast running out of time for me to restore to what I believe to be a
> good point in July.
You're welcome. I can't personally help with the problem, but I
recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
Moreover, I don't think going to a restore point as far back as July
is a good idea. I recommend a week or two's worth of restore points,
but the number you get with XP's default allocation is too large. If
you go back too far, you tend to get the registry out of synch with
other files on the drive, so three months worth of restore points
aren't really useful, and going to a three month old restore point is
likely to create problems for you.
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > System restore is turned on, but I can not restore to any point. Can any one
> > > help me sort out this problem.
> >
> >
> > Please tell us exactly what you do to try to restore, and exactly what
> > happens when you try, including the exact verbatim text of any
> > messages you receive.
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
A
Arran
Guest
Re: System restore not working
Gerry answer to your question is 'Norton'
Thanks every one for help. Will try out suggested solutions.
Arran
"Gerry" wrote:
>
> What security software is installed?
> http://bertk.mvps.org/html/srfail.html
>
> Not all problem software is mentioned here as the list is growing.
>
>
> --
>
>
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
> Arran wrote:
> > System restore is turned on, but I can not restore to any point. Can
> > any one help me sort out this problem.
>
>
>
Gerry answer to your question is 'Norton'
Thanks every one for help. Will try out suggested solutions.
Arran
"Gerry" wrote:
>
> What security software is installed?
> http://bertk.mvps.org/html/srfail.html
>
> Not all problem software is mentioned here as the list is growing.
>
>
> --
>
>
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
> Arran wrote:
> > System restore is turned on, but I can not restore to any point. Can
> > any one help me sort out this problem.
>
>
>
A
Arran
Guest
Re: System restore not working
I certianly take your point but it is the only way I know how to possibly
solve the issue with one of my applications. Will have a look at suggestions.
Out of curiosity what sort of problems may arise?
Arran
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > Ken thanks for reply
> > It was working the in the past!
> > Access it via System Tools > System Restore. There are plenty of points to
> > select from but they all end up with the Message ' your computer cannot be
> > restored to ****. No changes have been made'
> > I am fast running out of time for me to restore to what I believe to be a
> > good point in July.
>
>
> You're welcome. I can't personally help with the problem, but I
> recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
>
> Moreover, I don't think going to a restore point as far back as July
> is a good idea. I recommend a week or two's worth of restore points,
> but the number you get with XP's default allocation is too large. If
> you go back too far, you tend to get the registry out of synch with
> other files on the drive, so three months worth of restore points
> aren't really useful, and going to a three month old restore point is
> likely to create problems for you.
>
>
>
>
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > help me sort out this problem.
> > >
> > >
> > > Please tell us exactly what you do to try to restore, and exactly what
> > > happens when you try, including the exact verbatim text of any
> > > messages you receive.
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
I certianly take your point but it is the only way I know how to possibly
solve the issue with one of my applications. Will have a look at suggestions.
Out of curiosity what sort of problems may arise?
Arran
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > Ken thanks for reply
> > It was working the in the past!
> > Access it via System Tools > System Restore. There are plenty of points to
> > select from but they all end up with the Message ' your computer cannot be
> > restored to ****. No changes have been made'
> > I am fast running out of time for me to restore to what I believe to be a
> > good point in July.
>
>
> You're welcome. I can't personally help with the problem, but I
> recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
>
> Moreover, I don't think going to a restore point as far back as July
> is a good idea. I recommend a week or two's worth of restore points,
> but the number you get with XP's default allocation is too large. If
> you go back too far, you tend to get the registry out of synch with
> other files on the drive, so three months worth of restore points
> aren't really useful, and going to a three month old restore point is
> likely to create problems for you.
>
>
>
>
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > help me sort out this problem.
> > >
> > >
> > > Please tell us exactly what you do to try to restore, and exactly what
> > > happens when you try, including the exact verbatim text of any
> > > messages you receive.
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
K
Ken Blake, MVP
Guest
Re: System restore not working
On Sun, 5 Oct 2008 12:48:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> I certianly take your point but it is the only way I know how to possibly
> solve the issue with one of my applications.
What application? What's the issue?
Will have a look at suggestions.
> Out of curiosity what sort of problems may arise?
> Arran
>
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > Ken thanks for reply
> > > It was working the in the past!
> > > Access it via System Tools > System Restore. There are plenty of points to
> > > select from but they all end up with the Message ' your computer cannot be
> > > restored to ****. No changes have been made'
> > > I am fast running out of time for me to restore to what I believe to be a
> > > good point in July.
> >
> >
> > You're welcome. I can't personally help with the problem, but I
> > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> >
> > Moreover, I don't think going to a restore point as far back as July
> > is a good idea. I recommend a week or two's worth of restore points,
> > but the number you get with XP's default allocation is too large. If
> > you go back too far, you tend to get the registry out of synch with
> > other files on the drive, so three months worth of restore points
> > aren't really useful, and going to a three month old restore point is
> > likely to create problems for you.
> >
> >
> >
> >
> > > "Ken Blake, MVP" wrote:
> > >
> > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > <Arran@discussions.microsoft.com> wrote:
> > > >
> > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > help me sort out this problem.
> > > >
> > > >
> > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > happens when you try, including the exact verbatim text of any
> > > > messages you receive.
> > > >
> > > > --
> > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > Please Reply to the Newsgroup
> > > >
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
On Sun, 5 Oct 2008 12:48:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> I certianly take your point but it is the only way I know how to possibly
> solve the issue with one of my applications.
What application? What's the issue?
Will have a look at suggestions.
> Out of curiosity what sort of problems may arise?
> Arran
>
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > Ken thanks for reply
> > > It was working the in the past!
> > > Access it via System Tools > System Restore. There are plenty of points to
> > > select from but they all end up with the Message ' your computer cannot be
> > > restored to ****. No changes have been made'
> > > I am fast running out of time for me to restore to what I believe to be a
> > > good point in July.
> >
> >
> > You're welcome. I can't personally help with the problem, but I
> > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> >
> > Moreover, I don't think going to a restore point as far back as July
> > is a good idea. I recommend a week or two's worth of restore points,
> > but the number you get with XP's default allocation is too large. If
> > you go back too far, you tend to get the registry out of synch with
> > other files on the drive, so three months worth of restore points
> > aren't really useful, and going to a three month old restore point is
> > likely to create problems for you.
> >
> >
> >
> >
> > > "Ken Blake, MVP" wrote:
> > >
> > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > <Arran@discussions.microsoft.com> wrote:
> > > >
> > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > help me sort out this problem.
> > > >
> > > >
> > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > happens when you try, including the exact verbatim text of any
> > > > messages you receive.
> > > >
> > > > --
> > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > Please Reply to the Newsgroup
> > > >
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
P
PA Bear [MS MVP]
Guest
Re: System restore not working
See http://bertk.mvps.org/html/symantecdoc1.html
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/
Arran wrote:
> Gerry answer to your question is 'Norton'
>
> Thanks every one for help. Will try out suggested solutions.
>>
>> What security software is installed?
>> http://bertk.mvps.org/html/srfail.html
>>
>> Not all problem software is mentioned here as the list is growing.
>>
>>> System restore is turned on, but I can not restore to any point. Can
>>> any one help me sort out this problem.
See http://bertk.mvps.org/html/symantecdoc1.html
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/
Arran wrote:
> Gerry answer to your question is 'Norton'
>
> Thanks every one for help. Will try out suggested solutions.
>>
>> What security software is installed?
>> http://bertk.mvps.org/html/srfail.html
>>
>> Not all problem software is mentioned here as the list is growing.
>>
>>> System restore is turned on, but I can not restore to any point. Can
>>> any one help me sort out this problem.
A
Arran
Guest
Re: System restore not working
I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
I ran a driver udate and ever since then the picture has been dreadfull.
Tried rolling back driver but that didn't work/cure the problem, tried
uninstalling drives but the reinstalled ones are the same. Hence the desire
to system restore. While the System Restore problem neads to be sorted out
the issue with the application is probably not worth the effort it. My
problem is I am like a dog with a bone when it comes down to it!!
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > I certianly take your point but it is the only way I know how to possibly
> > solve the issue with one of my applications.
>
>
> What application? What's the issue?
>
>
>
> Will have a look at suggestions.
> > Out of curiosity what sort of problems may arise?
> > Arran
> >
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > Ken thanks for reply
> > > > It was working the in the past!
> > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > select from but they all end up with the Message ' your computer cannot be
> > > > restored to ****. No changes have been made'
> > > > I am fast running out of time for me to restore to what I believe to be a
> > > > good point in July.
> > >
> > >
> > > You're welcome. I can't personally help with the problem, but I
> > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > >
> > > Moreover, I don't think going to a restore point as far back as July
> > > is a good idea. I recommend a week or two's worth of restore points,
> > > but the number you get with XP's default allocation is too large. If
> > > you go back too far, you tend to get the registry out of synch with
> > > other files on the drive, so three months worth of restore points
> > > aren't really useful, and going to a three month old restore point is
> > > likely to create problems for you.
> > >
> > >
> > >
> > >
> > > > "Ken Blake, MVP" wrote:
> > > >
> > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > <Arran@discussions.microsoft.com> wrote:
> > > > >
> > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > help me sort out this problem.
> > > > >
> > > > >
> > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > happens when you try, including the exact verbatim text of any
> > > > > messages you receive.
> > > > >
> > > > > --
> > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > Please Reply to the Newsgroup
> > > > >
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
I ran a driver udate and ever since then the picture has been dreadfull.
Tried rolling back driver but that didn't work/cure the problem, tried
uninstalling drives but the reinstalled ones are the same. Hence the desire
to system restore. While the System Restore problem neads to be sorted out
the issue with the application is probably not worth the effort it. My
problem is I am like a dog with a bone when it comes down to it!!
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > I certianly take your point but it is the only way I know how to possibly
> > solve the issue with one of my applications.
>
>
> What application? What's the issue?
>
>
>
> Will have a look at suggestions.
> > Out of curiosity what sort of problems may arise?
> > Arran
> >
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > Ken thanks for reply
> > > > It was working the in the past!
> > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > select from but they all end up with the Message ' your computer cannot be
> > > > restored to ****. No changes have been made'
> > > > I am fast running out of time for me to restore to what I believe to be a
> > > > good point in July.
> > >
> > >
> > > You're welcome. I can't personally help with the problem, but I
> > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > >
> > > Moreover, I don't think going to a restore point as far back as July
> > > is a good idea. I recommend a week or two's worth of restore points,
> > > but the number you get with XP's default allocation is too large. If
> > > you go back too far, you tend to get the registry out of synch with
> > > other files on the drive, so three months worth of restore points
> > > aren't really useful, and going to a three month old restore point is
> > > likely to create problems for you.
> > >
> > >
> > >
> > >
> > > > "Ken Blake, MVP" wrote:
> > > >
> > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > <Arran@discussions.microsoft.com> wrote:
> > > > >
> > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > help me sort out this problem.
> > > > >
> > > > >
> > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > happens when you try, including the exact verbatim text of any
> > > > > messages you receive.
> > > > >
> > > > > --
> > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > Please Reply to the Newsgroup
> > > > >
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
K
Ken Blake, MVP
Guest
Re: System restore not working
On Sun, 5 Oct 2008 13:31:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
> I ran a driver udate and ever since then the picture has been dreadfull.
> Tried rolling back driver but that didn't work/cure the problem, tried
> uninstalling drives but the reinstalled ones are the same. Hence the desire
> to system restore. While the System Restore problem neads to be sorted out
> the issue with the application is probably not worth the effort it. My
> problem is I am like a dog with a bone when it comes down to it!!
Sorry, I can't help with your particular problem. But my guess is that
System Restore wouldn't solve that problem, and using it to go back
three months might very cause you additional problems.
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > I certianly take your point but it is the only way I know how to possibly
> > > solve the issue with one of my applications.
> >
> >
> > What application? What's the issue?
> >
> >
> >
> > Will have a look at suggestions.
> > > Out of curiosity what sort of problems may arise?
> > > Arran
> > >
> > > "Ken Blake, MVP" wrote:
> > >
> > > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > > <Arran@discussions.microsoft.com> wrote:
> > > >
> > > > > Ken thanks for reply
> > > > > It was working the in the past!
> > > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > > select from but they all end up with the Message ' your computer cannot be
> > > > > restored to ****. No changes have been made'
> > > > > I am fast running out of time for me to restore to what I believe to be a
> > > > > good point in July.
> > > >
> > > >
> > > > You're welcome. I can't personally help with the problem, but I
> > > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > > >
> > > > Moreover, I don't think going to a restore point as far back as July
> > > > is a good idea. I recommend a week or two's worth of restore points,
> > > > but the number you get with XP's default allocation is too large. If
> > > > you go back too far, you tend to get the registry out of synch with
> > > > other files on the drive, so three months worth of restore points
> > > > aren't really useful, and going to a three month old restore point is
> > > > likely to create problems for you.
> > > >
> > > >
> > > >
> > > >
> > > > > "Ken Blake, MVP" wrote:
> > > > >
> > > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > > <Arran@discussions.microsoft.com> wrote:
> > > > > >
> > > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > > help me sort out this problem.
> > > > > >
> > > > > >
> > > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > > happens when you try, including the exact verbatim text of any
> > > > > > messages you receive.
> > > > > >
> > > > > > --
> > > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > > Please Reply to the Newsgroup
> > > > > >
> > > >
> > > > --
> > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > Please Reply to the Newsgroup
> > > >
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
On Sun, 5 Oct 2008 13:31:00 -0700, Arran
<Arran@discussions.microsoft.com> wrote:
> I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
> I ran a driver udate and ever since then the picture has been dreadfull.
> Tried rolling back driver but that didn't work/cure the problem, tried
> uninstalling drives but the reinstalled ones are the same. Hence the desire
> to system restore. While the System Restore problem neads to be sorted out
> the issue with the application is probably not worth the effort it. My
> problem is I am like a dog with a bone when it comes down to it!!
Sorry, I can't help with your particular problem. But my guess is that
System Restore wouldn't solve that problem, and using it to go back
three months might very cause you additional problems.
> "Ken Blake, MVP" wrote:
>
> > On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> > <Arran@discussions.microsoft.com> wrote:
> >
> > > I certianly take your point but it is the only way I know how to possibly
> > > solve the issue with one of my applications.
> >
> >
> > What application? What's the issue?
> >
> >
> >
> > Will have a look at suggestions.
> > > Out of curiosity what sort of problems may arise?
> > > Arran
> > >
> > > "Ken Blake, MVP" wrote:
> > >
> > > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > > <Arran@discussions.microsoft.com> wrote:
> > > >
> > > > > Ken thanks for reply
> > > > > It was working the in the past!
> > > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > > select from but they all end up with the Message ' your computer cannot be
> > > > > restored to ****. No changes have been made'
> > > > > I am fast running out of time for me to restore to what I believe to be a
> > > > > good point in July.
> > > >
> > > >
> > > > You're welcome. I can't personally help with the problem, but I
> > > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > > >
> > > > Moreover, I don't think going to a restore point as far back as July
> > > > is a good idea. I recommend a week or two's worth of restore points,
> > > > but the number you get with XP's default allocation is too large. If
> > > > you go back too far, you tend to get the registry out of synch with
> > > > other files on the drive, so three months worth of restore points
> > > > aren't really useful, and going to a three month old restore point is
> > > > likely to create problems for you.
> > > >
> > > >
> > > >
> > > >
> > > > > "Ken Blake, MVP" wrote:
> > > > >
> > > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > > <Arran@discussions.microsoft.com> wrote:
> > > > > >
> > > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > > help me sort out this problem.
> > > > > >
> > > > > >
> > > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > > happens when you try, including the exact verbatim text of any
> > > > > > messages you receive.
> > > > > >
> > > > > > --
> > > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > > Please Reply to the Newsgroup
> > > > > >
> > > >
> > > > --
> > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > Please Reply to the Newsgroup
> > > >
> >
> > --
> > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > Please Reply to the Newsgroup
> >
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
A
Arran
Guest
Re: System restore not working
Thanks Ken.
Will heed your advice. This bone is buried!! Looking into viewing Freeview
via USB plug in.
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 13:31:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
> > I ran a driver udate and ever since then the picture has been dreadfull.
> > Tried rolling back driver but that didn't work/cure the problem, tried
> > uninstalling drives but the reinstalled ones are the same. Hence the desire
> > to system restore. While the System Restore problem neads to be sorted out
> > the issue with the application is probably not worth the effort it. My
> > problem is I am like a dog with a bone when it comes down to it!!
>
>
> Sorry, I can't help with your particular problem. But my guess is that
> System Restore wouldn't solve that problem, and using it to go back
> three months might very cause you additional problems.
>
>
>
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > I certianly take your point but it is the only way I know how to possibly
> > > > solve the issue with one of my applications.
> > >
> > >
> > > What application? What's the issue?
> > >
> > >
> > >
> > > Will have a look at suggestions.
> > > > Out of curiosity what sort of problems may arise?
> > > > Arran
> > > >
> > > > "Ken Blake, MVP" wrote:
> > > >
> > > > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > > > <Arran@discussions.microsoft.com> wrote:
> > > > >
> > > > > > Ken thanks for reply
> > > > > > It was working the in the past!
> > > > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > > > select from but they all end up with the Message ' your computer cannot be
> > > > > > restored to ****. No changes have been made'
> > > > > > I am fast running out of time for me to restore to what I believe to be a
> > > > > > good point in July.
> > > > >
> > > > >
> > > > > You're welcome. I can't personally help with the problem, but I
> > > > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > > > >
> > > > > Moreover, I don't think going to a restore point as far back as July
> > > > > is a good idea. I recommend a week or two's worth of restore points,
> > > > > but the number you get with XP's default allocation is too large. If
> > > > > you go back too far, you tend to get the registry out of synch with
> > > > > other files on the drive, so three months worth of restore points
> > > > > aren't really useful, and going to a three month old restore point is
> > > > > likely to create problems for you.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > "Ken Blake, MVP" wrote:
> > > > > >
> > > > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > > > <Arran@discussions.microsoft.com> wrote:
> > > > > > >
> > > > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > > > help me sort out this problem.
> > > > > > >
> > > > > > >
> > > > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > > > happens when you try, including the exact verbatim text of any
> > > > > > > messages you receive.
> > > > > > >
> > > > > > > --
> > > > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > > > Please Reply to the Newsgroup
> > > > > > >
> > > > >
> > > > > --
> > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > Please Reply to the Newsgroup
> > > > >
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>
Thanks Ken.
Will heed your advice. This bone is buried!! Looking into viewing Freeview
via USB plug in.
"Ken Blake, MVP" wrote:
> On Sun, 5 Oct 2008 13:31:00 -0700, Arran
> <Arran@discussions.microsoft.com> wrote:
>
> > I have an Acer Aspire RC500, it has the facility to veiw & record Anologe TV.
> > I ran a driver udate and ever since then the picture has been dreadfull.
> > Tried rolling back driver but that didn't work/cure the problem, tried
> > uninstalling drives but the reinstalled ones are the same. Hence the desire
> > to system restore. While the System Restore problem neads to be sorted out
> > the issue with the application is probably not worth the effort it. My
> > problem is I am like a dog with a bone when it comes down to it!!
>
>
> Sorry, I can't help with your particular problem. But my guess is that
> System Restore wouldn't solve that problem, and using it to go back
> three months might very cause you additional problems.
>
>
>
> > "Ken Blake, MVP" wrote:
> >
> > > On Sun, 5 Oct 2008 12:48:00 -0700, Arran
> > > <Arran@discussions.microsoft.com> wrote:
> > >
> > > > I certianly take your point but it is the only way I know how to possibly
> > > > solve the issue with one of my applications.
> > >
> > >
> > > What application? What's the issue?
> > >
> > >
> > >
> > > Will have a look at suggestions.
> > > > Out of curiosity what sort of problems may arise?
> > > > Arran
> > > >
> > > > "Ken Blake, MVP" wrote:
> > > >
> > > > > On Sun, 5 Oct 2008 12:06:04 -0700, Arran
> > > > > <Arran@discussions.microsoft.com> wrote:
> > > > >
> > > > > > Ken thanks for reply
> > > > > > It was working the in the past!
> > > > > > Access it via System Tools > System Restore. There are plenty of points to
> > > > > > select from but they all end up with the Message ' your computer cannot be
> > > > > > restored to ****. No changes have been made'
> > > > > > I am fast running out of time for me to restore to what I believe to be a
> > > > > > good point in July.
> > > > >
> > > > >
> > > > > You're welcome. I can't personally help with the problem, but I
> > > > > recommend Bert Kinney's site at http://bertk.mvps.org/html/srfail.html
> > > > >
> > > > > Moreover, I don't think going to a restore point as far back as July
> > > > > is a good idea. I recommend a week or two's worth of restore points,
> > > > > but the number you get with XP's default allocation is too large. If
> > > > > you go back too far, you tend to get the registry out of synch with
> > > > > other files on the drive, so three months worth of restore points
> > > > > aren't really useful, and going to a three month old restore point is
> > > > > likely to create problems for you.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > "Ken Blake, MVP" wrote:
> > > > > >
> > > > > > > On Sun, 5 Oct 2008 11:08:00 -0700, Arran
> > > > > > > <Arran@discussions.microsoft.com> wrote:
> > > > > > >
> > > > > > > > System restore is turned on, but I can not restore to any point. Can any one
> > > > > > > > help me sort out this problem.
> > > > > > >
> > > > > > >
> > > > > > > Please tell us exactly what you do to try to restore, and exactly what
> > > > > > > happens when you try, including the exact verbatim text of any
> > > > > > > messages you receive.
> > > > > > >
> > > > > > > --
> > > > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > > > Please Reply to the Newsgroup
> > > > > > >
> > > > >
> > > > > --
> > > > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > > > Please Reply to the Newsgroup
> > > > >
> > >
> > > --
> > > Ken Blake, Microsoft MVP - Windows Desktop Experience
> > > Please Reply to the Newsgroup
> > >
>
> --
> Ken Blake, Microsoft MVP - Windows Desktop Experience
> Please Reply to the Newsgroup
>