Another Problem After SP3 Installation

  • Thread starter Thread starter Rapier
  • Start date Start date
R

Rapier

Guest
After updating to SP3, when turning off computer it hangs with the usual
message "windows is shutting down" but doesn't until I switch it off, I've
done a restore and this solved the problem but when I installed SP3 again,
I'm back to the same problem.
 
RE: Another Problem After SP3 Installation

https://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid

Free MS support for XP SP3 at above MS link.
--
Mad Mike


"Rapier" wrote:

> After updating to SP3, when turning off computer it hangs with the usual
> message "windows is shutting down" but doesn't until I switch it off, I've
> done a restore and this solved the problem but when I installed SP3 again,
> I'm back to the same problem.
>
 
RE: Another Problem After SP3 Installation



"Rapier" wrote:

> After updating to SP3, when turning off computer it hangs with the usual
> message "windows is shutting down" but doesn't until I switch it off, I've
> done a restore and this solved the problem but when I installed SP3 again,
> I'm back to the same problem.


First, make sure the machine is malware and viruses free by running a
thorough scan!
Run disk clean up on your Drive and read these info here:
Steps to take before you install Windows XP Service Pack 3
http://support.microsoft.com/kb/950717

Release Notes for Windows XP Service Pack 3
http://download.microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-a802-e4057aa8c631/relnotes.htm
Error message when you try to install Windows XP Service Pack 3: "Access is
denied" or “Service Pack installation did not complete”
http://support.microsoft.com/kb/949377

Updates are not installed successfully from Windows Update, from Microsoft
Update, or by using Automatic Updates after you perform a new Windows XP
installation or you repair a Windows XP installation
http://support.microsoft.com/kb/943144

Open a notepad and copy and paste the following into it and save as
update.bat on your desktop. Double click the bat file to excute and click
[Yes to register the dlls and reboot your machine and see if that will help!

regsvr32 wuweb.dll
regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll


Or try this fix.
Download Dial-a-Fix:
http://wiki.djlizard.net/Dial-a-fix

HTH,
nass
---
http://www.nasstec.co.uk
 
RE: Another Problem After SP3 Installation

Cheers nass, the update.bat file did the trick, thanks again.

"nass" wrote:

>
>
> "Rapier" wrote:
>
> > After updating to SP3, when turning off computer it hangs with the usual
> > message "windows is shutting down" but doesn't until I switch it off, I've
> > done a restore and this solved the problem but when I installed SP3 again,
> > I'm back to the same problem.

>
> First, make sure the machine is malware and viruses free by running a
> thorough scan!
> Run disk clean up on your Drive and read these info here:
> Steps to take before you install Windows XP Service Pack 3
> http://support.microsoft.com/kb/950717
>
> Release Notes for Windows XP Service Pack 3
> http://download.microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-a802-e4057aa8c631/relnotes.htm
> Error message when you try to install Windows XP Service Pack 3: "Access is
> denied" or “Service Pack installation did not complete”
> http://support.microsoft.com/kb/949377
>
> Updates are not installed successfully from Windows Update, from Microsoft
> Update, or by using Automatic Updates after you perform a new Windows XP
> installation or you repair a Windows XP installation
> http://support.microsoft.com/kb/943144
>
> Open a notepad and copy and paste the following into it and save as
> update.bat on your desktop. Double click the bat file to excute and click
> [Yes to register the dlls and reboot your machine and see if that will help!
>
> regsvr32 wuweb.dll
> regsvr32 wuapi.dll
> regsvr32 wuaueng.dll
> regsvr32 wuaueng1.dll
> regsvr32 wucltui.dll
> regsvr32 wups.dll
> regsvr32 wups2.dll
>
>
> Or try this fix.
> Download Dial-a-Fix:
> http://wiki.djlizard.net/Dial-a-fix
>
> HTH,
> nass
> ---
> http://www.nasstec.co.uk
>
 
RE: Another Problem After SP3 Installation


Glad to Help Rapier and thanks for the feedback.
Good luck.
nass
---
http://www.nasstec.co.uk

"Rapier" wrote:

> Cheers nass, the update.bat file did the trick, thanks again.
>
> "nass" wrote:
>
> >
> >
> > "Rapier" wrote:
> >
> > > After updating to SP3, when turning off computer it hangs with the usual
> > > message "windows is shutting down" but doesn't until I switch it off, I've
> > > done a restore and this solved the problem but when I installed SP3 again,
> > > I'm back to the same problem.

> >
> > First, make sure the machine is malware and viruses free by running a
> > thorough scan!
> > Run disk clean up on your Drive and read these info here:
> > Steps to take before you install Windows XP Service Pack 3
> > http://support.microsoft.com/kb/950717
> >
> > Release Notes for Windows XP Service Pack 3
> > http://download.microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-a802-e4057aa8c631/relnotes.htm
> > Error message when you try to install Windows XP Service Pack 3: "Access is
> > denied" or “Service Pack installation did not complete”
> > http://support.microsoft.com/kb/949377
> >
> > Updates are not installed successfully from Windows Update, from Microsoft
> > Update, or by using Automatic Updates after you perform a new Windows XP
> > installation or you repair a Windows XP installation
> > http://support.microsoft.com/kb/943144
> >
> > Open a notepad and copy and paste the following into it and save as
> > update.bat on your desktop. Double click the bat file to excute and click
> > [Yes to register the dlls and reboot your machine and see if that will help!
> >
> > regsvr32 wuweb.dll
> > regsvr32 wuapi.dll
> > regsvr32 wuaueng.dll
> > regsvr32 wuaueng1.dll
> > regsvr32 wucltui.dll
> > regsvr32 wups.dll
> > regsvr32 wups2.dll
> >
> >
> > Or try this fix.
> > Download Dial-a-Fix:
> > http://wiki.djlizard.net/Dial-a-fix
> >
> > HTH,
> > nass
> > ---
> > http://www.nasstec.co.uk
> >
 
Back
Top