Ghosting Issue

[Parvardigar]

This is very uncomplicated. I have at work here only Dell Optiplex
GX1's running Windows 2000.
On all the machine I ghosted from former harddrive 9GB to new
harddrive 80GB.
No problems.
On this one machine I have ghosted in the usual fashion the 9GB to
the
80GB drive.
And I did this on two new fresh WD harddrives ending up with (after
installing the newly Ghosted drive) this Blue Screen

Stop 000000007B and so on ending with Inaccessible_Boot_Device.


I've ran the Ghost several times and ending with the blue screen
message.
In Bios I alter the device to auto, and it is found. Bios fine.
I can upon reboot launch safe, safe with networking, LKG, and so on.
However, the bluescreen appears in every instance with the Stop /
Device bluescreen message.


I've been successful on all the machines, all the same OS, ghosting;
and this computer is proving to be a problem. Is there a solution?
Let
me know. Thanks John M

 

[John John (MVP)]

Re: Ghosting Issue

This is usually a controller issue, are all the machines identical? Is
the disk on an IDE controller? Is it on the same IDE controller
(Primary/Secondary)?

John

Parvardigar wrote:

> This is very uncomplicated. I have at work here only Dell Optiplex
> GX1's running Windows 2000.
> On all the machine I ghosted from former harddrive 9GB to new
> harddrive 80GB.
> No problems.
> On this one machine I have ghosted in the usual fashion the 9GB to
> the
> 80GB drive.
> And I did this on two new fresh WD harddrives ending up with (after
> installing the newly Ghosted drive) this Blue Screen
>
> Stop 000000007B and so on ending with Inaccessible_Boot_Device.
>
>
> I've ran the Ghost several times and ending with the blue screen
> message.
> In Bios I alter the device to auto, and it is found. Bios fine.
> I can upon reboot launch safe, safe with networking, LKG, and so on.
> However, the bluescreen appears in every instance with the Stop /
> Device bluescreen message.
>
>
> I've been successful on all the machines, all the same OS, ghosting;
> and this computer is proving to be a problem. Is there a solution?
> Let
> me know. Thanks John M
>

 

[Parvardigar]

Re: Ghosting Issue

On Oct 22, 7:58 am, "John John (MVP)" <audetw...@nbnet.nb.ca> wrote:
> This is usually a controller issue, are all the machines identical?  Is
> the disk on an IDE controller?  Is it on the same IDE controller
> (Primary/Secondary)?
>
> John
>
>
>
> Parvardigar wrote:
> > This is very uncomplicated. I have at work here only Dell Optiplex
> > GX1's running Windows 2000.
> > On all the machine I ghosted from former harddrive 9GB to new
> > harddrive 80GB.
> > No problems.
> > On this one machine I have ghosted in the usual fashion the 9GB to
> > the
> > 80GB drive.
> > And I did this on two new fresh WD harddrives ending up with (after
> > installing the newly Ghosted drive) this Blue Screen
>
> > Stop 000000007B and so on ending with Inaccessible_Boot_Device.
>
> > I've ran the Ghost several times and ending with the blue screen
> > message.
> > In Bios I alter the device to auto, and it is found. Bios fine.
> > I can upon reboot launch safe, safe with networking, LKG, and so on.
> > However, the bluescreen appears in every instance with the Stop /
> > Device bluescreen message.
>
> > I've been successful on all the machines, all the same OS, ghosting;
> > and this computer is proving to be a problem. Is there a solution?
> > Let
> > me know. Thanks John M- Hide quoted text -
>
> - Show quoted text -


All the machines are identitcal. I even used three identical computers
using the same cable ; primary ; auto detect. If I return the old hard
drive, no issue ; and insert the ghosted hard drive ; problem. I've
followed on all the computers (all the same model) this exact
procedure ...WD format on the new hard drive - checking cmos for hard
drive (old) master ; hard drive new (slave) and then Ghosting.

Returning cmos to the original setting hard drive primary ; no slave.
And getting a blue screen on reboot boot. Than I replace the new hard
drive with the old hard drive and no issues.

Now I could see problems if a few of the computers were to give me
ghosting troubles ....but 11 computer ; all exact model ; the exact
ghosting procedure - and everything without a hitch until this current
situation with Joe's computer.

Thanks

 

[Pegasus \(MVP\)]

Re: Ghosting Issue


"Parvardigar" <parvardigar@yahoo.com> wrote in message
news:dcc85f8e-c977-484c-a802-2839444ba947@p10g2000prf.googlegroups.com...
On Oct 22, 7:58 am, "John John (MVP)" <audetw...@nbnet.nb.ca> wrote:
> This is usually a controller issue, are all the machines identical? Is
> the disk on an IDE controller? Is it on the same IDE controller
> (Primary/Secondary)?
>
> John
>
>
>
> Parvardigar wrote:
> > This is very uncomplicated. I have at work here only Dell Optiplex
> > GX1's running Windows 2000.
> > On all the machine I ghosted from former harddrive 9GB to new
> > harddrive 80GB.
> > No problems.
> > On this one machine I have ghosted in the usual fashion the 9GB to
> > the
> > 80GB drive.
> > And I did this on two new fresh WD harddrives ending up with (after
> > installing the newly Ghosted drive) this Blue Screen
>
> > Stop 000000007B and so on ending with Inaccessible_Boot_Device.
>
> > I've ran the Ghost several times and ending with the blue screen
> > message.
> > In Bios I alter the device to auto, and it is found. Bios fine.
> > I can upon reboot launch safe, safe with networking, LKG, and so on.
> > However, the bluescreen appears in every instance with the Stop /
> > Device bluescreen message.
>
> > I've been successful on all the machines, all the same OS, ghosting;
> > and this computer is proving to be a problem. Is there a solution?
> > Let
> > me know. Thanks John M- Hide quoted text -
>
> - Show quoted text -


All the machines are identitcal. I even used three identical computers
using the same cable ; primary ; auto detect. If I return the old hard
drive, no issue ; and insert the ghosted hard drive ; problem. I've
followed on all the computers (all the same model) this exact
procedure ...WD format on the new hard drive - checking cmos for hard
drive (old) master ; hard drive new (slave) and then Ghosting.

Returning cmos to the original setting hard drive primary ; no slave.
And getting a blue screen on reboot boot. Than I replace the new hard
drive with the old hard drive and no issues.

Now I could see problems if a few of the computers were to give me
ghosting troubles ....but 11 computer ; all exact model ; the exact
ghosting procedure - and everything without a hitch until this current
situation with Joe's computer.

Thanks
==============
The machines are obviously not identical. If they were then you would not
have the problem. I have come across similar issues - they were caused by
one machine having a slightly different chip set. A repair installation
might fix the problem.

 

[Parvardigar]

Re: Ghosting Issue

On Oct 22, 9:11 am, "Pegasus \(MVP\)" <I....@fly.com.oz> wrote:
> "Parvardigar" <parvardi...@yahoo.com> wrote in message
>
> news:dcc85f8e-c977-484c-a802-2839444ba947@p10g2000prf.googlegroups.com...
> On Oct 22, 7:58 am, "John John (MVP)" <audetw...@nbnet.nb.ca> wrote:
>
>
>
>
>
> > This is usually a controller issue, are all the machines identical? Is
> > the disk on an IDE controller? Is it on the same IDE controller
> > (Primary/Secondary)?
>
> > John
>
> > Parvardigar wrote:
> > > This is very uncomplicated. I have at work here only Dell Optiplex
> > > GX1's running Windows 2000.
> > > On all the machine I ghosted from former harddrive 9GB to new
> > > harddrive 80GB.
> > > No problems.
> > > On this one machine I have ghosted in the usual fashion the 9GB to
> > > the
> > > 80GB drive.
> > > And I did this on two new fresh WD harddrives ending up with (after
> > > installing the newly Ghosted drive) this Blue Screen
>
> > > Stop 000000007B and so on ending with Inaccessible_Boot_Device.
>
> > > I've ran the Ghost several times and ending with the blue screen
> > > message.
> > > In Bios I alter the device to auto, and it is found. Bios fine.
> > > I can upon reboot launch safe, safe with networking, LKG, and so on.
> > > However, the bluescreen appears in every instance with the Stop /
> > > Device bluescreen message.
>
> > > I've been successful on all the machines, all the same OS, ghosting;
> > > and this computer is proving to be a problem. Is there a solution?
> > > Let
> > > me know. Thanks John M- Hide quoted text -
>
> > - Show quoted text -
>
> All the machines are identitcal. I even used three identical computers
> using the same cable ; primary ; auto detect. If I return the old hard
> drive, no issue ; and insert the ghosted hard drive ; problem. I've
> followed on all the computers (all the same model) this exact
> procedure ...WD format on the new hard drive - checking cmos for hard
> drive (old) master ; hard drive new (slave) and then Ghosting.
>
> Returning cmos to the original setting hard drive primary ; no slave.
> And getting a blue screen on reboot boot. Than I replace the new hard
> drive with the old hard drive and no issues.
>
> Now I could see problems if a few of the computers were to give me
> ghosting troubles ....but 11 computer ; all exact model ; the exact
> ghosting procedure - and everything without a hitch until this current
> situation with Joe's computer.
>
> Thanks
> ==============
> The machines are obviously not identical. If they were then you would not
> have the problem. I have come across similar issues - they were caused by
> one machine having a slightly different chip set. A repair installation
> might fix the problem.- Hide quoted text -
>
> - Show quoted text -

Yes...I can agree...even though these are all Dell Optiplex 110. The
'only' difference is the Mhz.
I don't understand a repair installation. Just a short comment on that
and I'll be willing to do a repair.

charlie

 

[John John (MVP)]

Re: Ghosting Issue

Parvardigar wrote:

> Yes...I can agree...even though these are all Dell Optiplex 110. The
> 'only' difference is the Mhz.
> I don't understand a repair installation. Just a short comment on that
> and I'll be willing to do a repair.

How to perform an in-place upgrade of Windows 2000
http://support.microsoft.com/kb/292175

John

 

[Sid Elbow]

Re: Ghosting Issue

Parvardigar wrote:

> On all the machine I ghosted from former harddrive 9GB to new
> harddrive 80GB.
> No problems.
> On this one machine I have ghosted in the usual fashion the 9GB to
> the
> 80GB drive.
> And I did this on two new fresh WD harddrives ending up with (after
> installing the newly Ghosted drive) this Blue Screen
>
> Stop 000000007B and so on ending with Inaccessible_Boot_Device.

I'm a bit vague on this because I'm going from memory and my memory
these days, well ....

It seems to me I ran into this myself when trying to restore a ghost
image to a fresh, unpartitioned drive. Never found out the cause but I
believe I got round it by manually creating (and perhaps formatting) an
empty partition on the drive first and then restoring to (overwriting)
that. At any rate it can't hurt to try before you take more drastic
measures.

 

[Parvardigar]

Re: Ghosting Issue

On Oct 22, 10:44 am, "John John (MVP)" <audetw...@nbnet.nb.ca> wrote:
> Parvardigar wrote:
>
>   > Yes...I can agree...even though these are all Dell Optiplex 110. The
>
> > 'only' difference is the Mhz.
> > I don't understand a repair installation. Just a short comment on that
> > and I'll be willing to do a repair.
>
> How to perform an in-place upgrade of Windows 2000http://support.microsoft.com/kb/292175
>
> John

There are two issues. If I alter cmos to boot first, to cd, for some
reason it boots to the hard drive. I can boot off the win98 setup
disks to get access to the Cd rom; but, because the drive is NTFS, the
Windows 2000 setup is unable to run an install because it is unable to
recognize the c:/ drive NTFS partition.

Even if I could overwrite C:\windows with \i386 I would loose the
registry so that would defeat the whole Ghosting operation.
I'm am Ghosting with accounting software on this drive and I need a
prestine Ghost.

Thanks


Thanks

 

[Pegasus \(MVP\)]

Re: Ghosting Issue


"Parvardigar" <parvardigar@yahoo.com> wrote in message
news:a45a6472-b6ca-44bc-ab0f-de5a669d0e98@u29g2000pro.googlegroups.com...
On Oct 22, 10:44 am, "John John (MVP)" <audetw...@nbnet.nb.ca> wrote:
> Parvardigar wrote:
>
> > Yes...I can agree...even though these are all Dell Optiplex 110. The
>
> > 'only' difference is the Mhz.
> > I don't understand a repair installation. Just a short comment on that
> > and I'll be willing to do a repair.
>
> How to perform an in-place upgrade of Windows
> 2000http://support.microsoft.com/kb/292175
>
> John

There are two issues. If I alter cmos to boot first, to cd, for some
reason it boots to the hard drive. I can boot off the win98 setup
disks to get access to the Cd rom; but, because the drive is NTFS, the
Windows 2000 setup is unable to run an install because it is unable to
recognize the c:/ drive NTFS partition.

Even if I could overwrite C:\windows with \i386 I would loose the
registry so that would defeat the whole Ghosting operation.
I'm am Ghosting with accounting software on this drive and I need a
prestine Ghost.

Thanks
=============
I can think of two reasons why you cannot boot the machine with your Win2000
installation CD.
a) The CD is damaged. Have you tried it on a different PC?
b) You have not configured your BIOS to boot from the CD. Have you tried
booting the machine with a WinXP CD?

Regardless of the above, AFAIR a Repair Installation will leave your
software settings (e.g. your accounting program) intact. Even if it does not
you have nothing to lose - you can always re-image the machine.

Thanks