AUTO UPDATE NOT WORKING

  • Thread starter Thread starter Gagba
  • Start date Start date
G

Gagba

Guest
For sometime now, whenever i log on, I am told that autoupdate is off so I
should click the balloon to turn it on. When I do, it doesn';t and tells me
to go to Systems to turn it on. I go there but still it doesn't come on. I
was then directed to do the ff:

Automatic Updates (allows the site to find, download and install
high-priority updates for your computer)
Background Intelligent Transfer Service (BITS) (helps updates download more
quickly and without problems if the download process is interrupted)
Event Log (keeps a record of updating activities to help with
troubleshooting, if needed)
To make sure these services are running:
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, double-click on Automatic Updates and then click
Properties.
4. In the Startup type list, select Automatic and click Apply.
5. Verify that the Service status is started, if the Service Status is
Stopped click on the Start Button.
6. In the list of services, double-click on Background Intelligent Transfer
Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply.
8. Verify that the Service status is started, If the Service Status is
Stopped click on the Start Button.
9. In the list of services, double-click on Event Log and then click
Properties.
10. In the Startup type list, select Automatic and click Apply.
11. Verify that the Service status is started, If the Service Status is
Stopped click on the Start Button.

I've done all these but still the autoupdate cannot be started. The message
i get is: Could not start the automatic update service on Local Computer.

Error 1058: The service could not be started either it is disabled or there
is no enabled devices associated with it.

I am frustrated. I need help urgently. Can anyone be of help, please.
--
All for one and one for all.
 
RE: AUTO UPDATE NOT WORKING

Hello Gagba,

1058 = Vundo ????

See if the solution in this thread helps.

<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsupdate&p=1&tid=94d230a5-48a2-43a1-b43c-7a94d5db023d&mid=94d230a5-48a2-43a1-b43c-7a94d5db023d>



I hope this post is helpful.

Let us know how it works ºut.

Good luck

Ǝиçεl
-=-


"Gagba" wrote:

> For sometime now, whenever i log on, I am told that autoupdate is off so I
> should click the balloon to turn it on. When I do, it doesn';t and tells me
> to go to Systems to turn it on. I go there but still it doesn't come on. I
> was then directed to do the ff:
>
> Automatic Updates (allows the site to find, download and install
> high-priority updates for your computer)
> Background Intelligent Transfer Service (BITS) (helps updates download more
> quickly and without problems if the download process is interrupted)
> Event Log (keeps a record of updating activities to help with
> troubleshooting, if needed)
> To make sure these services are running:
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, double-click on Automatic Updates and then click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply.
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, double-click on Background Intelligent Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply.
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. In the list of services, double-click on Event Log and then click
> Properties.
> 10. In the Startup type list, select Automatic and click Apply.
> 11. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
>
> I've done all these but still the autoupdate cannot be started. The message
> i get is: Could not start the automatic update service on Local Computer.
>
> Error 1058: The service could not be started either it is disabled or there
> is no enabled devices associated with it.
>
> I am frustrated. I need help urgently. Can anyone be of help, please.
> --
> All for one and one for all.
 
Re: AUTO UPDATE NOT WORKING

There's a very strong possibility that you have a Vundo infection, which is
usually accompanied by ZLOB and/or SDBot infections, all of which are
protected by a rootkit.

Run a thorough check for hijackware, including posting your hijackthis log
to an appropriate forum.

Checking for/Help with Hijackware
http://aumha.org/a/parasite.htm
http://aumha.org/a/quickfix.htm
http://aumha.net/viewtopic.php?t=5878
http://wiki.castlecops.com/Malware_Removal_and_Prevention:_Introduction
http://mvps.org/winhelp2002/unwanted.htm
http://inetexplorer.mvps.org/data/prevention.htm
http://inetexplorer.mvps.org/tshoot.html
http://www.mvps.org/sramesh2k/Malware_Defence.htm
http://defendingyourmachine2.blogspot.com/
http://www.elephantboycomputers.com/page2.html#Removing_Malware

When all else fails, HijackThis v2.0.2
(http://aumha.org/downloads/hijackthis.exe) is the preferred tool to use (in
conjuction with some other utilities). HijackThis will NOT fix anything on
its own, but it will help you to both identify and remove any
hijackware/spyware with assistance from an expert. **Post your log to
http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,
http://forums.spybot.info/forumdisplay.php?f=22,
http://aumha.net/viewforum.php?f=30, or another appropriate forum for review
by an expert in such matters, not here.**

If the procedures look too complex - and there is no shame in admitting this
isn't your cup of tea - take the machine to a local, reputable and
independent (i.e., not BigBoxStoreUSA) computer repair shop.

==========================================

Start a free Windows Update support incident request:
https://support.microsoft.com/oas/default.aspx?gprid=6527

Support for Windows Update:
http://support.microsoft.com/gp/wusupport

For home users, no-charge support is available by calling 1-866-PCSAFETY in
the United States and in Canada or by contacting your local Microsoft
subsidiary. There is no-charge for support calls that are associated with
security updates.
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Gagba wrote:
> For sometime now, whenever i log on, I am told that autoupdate is off so I
> should click the balloon to turn it on. When I do, it doesn';t and tells
> me
> to go to Systems to turn it on. I go there but still it doesn't come on. I
> was then directed to do the ff:
>
> Automatic Updates (allows the site to find, download and install
> high-priority updates for your computer)
> Background Intelligent Transfer Service (BITS) (helps updates download
> more
> quickly and without problems if the download process is interrupted)
> Event Log (keeps a record of updating activities to help with
> troubleshooting, if needed)
> To make sure these services are running:
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, double-click on Automatic Updates and then
> click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply.
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, double-click on Background Intelligent
> Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply.
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. In the list of services, double-click on Event Log and then click
> Properties.
> 10. In the Startup type list, select Automatic and click Apply.
> 11. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
>
> I've done all these but still the autoupdate cannot be started. The
> message
> i get is: Could not start the automatic update service on Local Computer.
>
> Error 1058: The service could not be started either it is disabled or
> there
> is no enabled devices associated with it.
>
> I am frustrated. I need help urgently. Can anyone be of help, please.
 
Back
Top