S
Storage pool under win 10 pro workstation
Guest
I've had the newly built system running 24/7 for a year now running Plex under Windows 10 Pro. I recently upgraded to Workstation to take advantage of Storage Spaces. I have created a 6 drive 8tb storage pool using Parity/Refs file system. All has been working great, for 6 months, but the SSD my OS was installed on bit the dust. After replacing the SSD I went through installing 10 pro and then through the MS store upgraded to workstation all went fine and it's running great, But! Workstation doesn't see the storage pool or even the drives.
1.This PC=no drives shown
2. Disk management=no drives shown
3. Power shell=no drives show
4. Device manager=shows drives
5. USB disconnect in task bar=shows drives, but cannot disconnect them
I have a utility that verified the drives are running fine and the parity system seems to be intact. At this point I figured I would format the drives and start over, I do have a complete backup, but no go! Not even aftermarket type disk utilities can read or format the drives. So what am I to do next.
I hope some one has a trick up their sleeve to help me out, I would hate to have to trash nearly $1000.00 in drives.
Regards
Tony
More...
1.This PC=no drives shown
2. Disk management=no drives shown
3. Power shell=no drives show
4. Device manager=shows drives
5. USB disconnect in task bar=shows drives, but cannot disconnect them
I have a utility that verified the drives are running fine and the parity system seems to be intact. At this point I figured I would format the drives and start over, I do have a complete backup, but no go! Not even aftermarket type disk utilities can read or format the drives. So what am I to do next.
I hope some one has a trick up their sleeve to help me out, I would hate to have to trash nearly $1000.00 in drives.
Regards
Tony
More...