Terminal Services printing problem

  • Thread starter Thread starter Josh - DSTECH
  • Start date Start date
J

Josh - DSTECH

Guest
Good morning,

I'm having a problem printing in Terminal Services on a Windows 2003 Server.
The printer works fine locally and is a LaserJet 1300 connected via a
parallel port. However, when I connect to the server the printer does not
show up. The driver is loaded on the server and I checked Event Viewer to
see if it was complaining about it and there are no entries. There are for
the other printer on the PC since those drivers are not loaded, which is ok.
It also does not seem to be even creating a TS port for that printer. Any
ideas would be much appreciated.

-Josh
 
Re: Terminal Services printing problem

I figured it out - HP had installed some proprietary port locally. Changed
it to LPT1, and voila!

-Josh

"Josh - DSTECH" <jmarenger@NOSPAM.dstech.us> wrote in message
news:vDcEi.4$gQ2.2@newsfe06.lga...
> Good morning,
>
> I'm having a problem printing in Terminal Services on a Windows 2003
> Server. The printer works fine locally and is a LaserJet 1300 connected
> via a parallel port. However, when I connect to the server the printer
> does not show up. The driver is loaded on the server and I checked Event
> Viewer to see if it was complaining about it and there are no entries.
> There are for the other printer on the PC since those drivers are not
> loaded, which is ok. It also does not seem to be even creating a TS port
> for that printer. Any ideas would be much appreciated.
>
> -Josh
>
>
 
Back
Top