Strange TCP/IP Issue

  • Thread starter Thread starter Dennis Rhine
  • Start date Start date
D

Dennis Rhine

Guest
I have an HP ProLiant DL360 server running Windows 2000 Server. The strange
issue we are seeing with this server - and only this server - is in the
TCP/IP settings. We have manually entered a total of six IP addresses into
this server (migrating from one IPS to another). If I run IPCONFIG /all I
see all of the correct IP addresses and everything appears to be correct.
However, if I open the Network Connection properties window the system tells
me that these settings are DHCP controlled. If I reset the network
controller by disabling the card and then reenabling it, all TCP/IP settings
are lost and must be manually reenetered. Any ideas where we can look to
overcome this? Thanks
 
Re: Strange TCP/IP Issue

This article may help.

http://support.microsoft.com/?id=285034

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"Dennis Rhine" wrote:
>I have an HP ProLiant DL360 server running Windows 2000 Server. The
>strange
> issue we are seeing with this server - and only this server - is in the
> TCP/IP settings. We have manually entered a total of six IP addresses
> into
> this server (migrating from one IPS to another). If I run IPCONFIG /all I
> see all of the correct IP addresses and everything appears to be correct.
> However, if I open the Network Connection properties window the system
> tells
> me that these settings are DHCP controlled. If I reset the network
> controller by disabling the card and then reenabling it, all TCP/IP
> settings
> are lost and must be manually reenetered. Any ideas where we can look to
> overcome this? Thanks
 
Back
Top