lmhost problem

  • Thread starter Thread starter ckwong19802003@yahoo.com
  • Start date Start date
C

ckwong19802003@yahoo.com

Guest
hi

I m doing a test for netbios and it is stuck with error code5 which is
access deny

below are some of the information
Machine name: test
ip : 10.208.10.100

i add an entry inside the lmhost file with
10.208.10.100 server01

when i do try to map to server01 it prompt me with the password and i seem
cant to connect to it.Kindly advise
 
Re: lmhost problem

System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help,

System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ...
www.chicagotech.net/systemerrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
<ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com...
hi

I m doing a test for netbios and it is stuck with error code5 which is
access deny

below are some of the information
Machine name: test
ip : 10.208.10.100

i add an entry inside the lmhost file with
10.208.10.100 server01

when i do try to map to server01 it prompt me with the password and i seem
cant to connect to it.Kindly advise
 
Re: lmhost problem

hi

as you seen my hostname is test(ip=10.208.10.1) and when you do a net view
\\test it wont get the system error 5 and when you do add another name on the
lmhost with server01(10.208.10.1) and you do a net view\\server01 you will
get system error 5.Any idea on that?


"Robert L [MVP - Networking]" wrote:

> System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help,
>
> System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ...
> www.chicagotech.net/systemerrors.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com...
> hi
>
> I m doing a test for netbios and it is stuck with error code5 which is
> access deny
>
> below are some of the information
> Machine name: test
> ip : 10.208.10.100
>
> i add an entry inside the lmhost file with
> 10.208.10.100 server01
>
> when i do try to map to server01 it prompt me with the password and i seem
> cant to connect to it.Kindly advise
 
Re: lmhost problem

What are the results if you do "ping -a 10.20.8.10.1" and "ping server01"?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
<ckwong19802003@yahoo.com> wrote in message news:CD090207-BED2-4E6D-8BBB-3BFA949EF6F4@microsoft.com...
hi

as you seen my hostname is test(ip=10.208.10.1) and when you do a net view
\\test it wont get the system error 5 and when you do add another name on the
lmhost with server01(10.208.10.1) and you do a net view\\server01 you will
get system error 5.Any idea on that?


"Robert L [MVP - Networking]" wrote:

> System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help,
>
> System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ...
> www.chicagotech.net/systemerrors.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com...
> hi
>
> I m doing a test for netbios and it is stuck with error code5 which is
> access deny
>
> below are some of the information
> Machine name: test
> ip : 10.208.10.100
>
> i add an entry inside the lmhost file with
> 10.208.10.100 server01
>
> when i do try to map to server01 it prompt me with the password and i seem
> cant to connect to it.Kindly advise
 
Re: lmhost problem

hello

I can ping the 10.208.10.1 or server01.Kindly advise


"Robert L [MVP - Networking]" wrote:

> What are the results if you do "ping -a 10.20.8.10.1" and "ping server01"?
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> <ckwong19802003@yahoo.com> wrote in message news:CD090207-BED2-4E6D-8BBB-3BFA949EF6F4@microsoft.com...
> hi
>
> as you seen my hostname is test(ip=10.208.10.1) and when you do a net view
> \\test it wont get the system error 5 and when you do add another name on the
> lmhost with server01(10.208.10.1) and you do a net view\\server01 you will
> get system error 5.Any idea on that?
>
>
> "Robert L [MVP - Networking]" wrote:
>
> > System error 5 is permission issue. So it is nothing to do with lmhost. Ii would double check the permission. Or this search result may help,
> >
> > System ErrorsIf the net view command fails with a "System error 5 has occurred. .... 2. when using net view \\hostname, you may receive "System error 5 has occurred. ...
> > www.chicagotech.net/systemerrors.htm
> >
> >
> > Bob Lin, MS-MVP, MCSE & CNE
> > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> > How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> > <ckwong19802003@yahoo.com> wrote in message news:E6890506-42AB-4549-976D-A7C8F4979F8A@microsoft.com...
> > hi
> >
> > I m doing a test for netbios and it is stuck with error code5 which is
> > access deny
> >
> > below are some of the information
> > Machine name: test
> > ip : 10.208.10.100
> >
> > i add an entry inside the lmhost file with
> > 10.208.10.100 server01
> >
> > when i do try to map to server01 it prompt me with the password and i seem
> > cant to connect to it.Kindly advise
 
Back
Top