Problem to install WINDOWS 2008 SERVER

innova97

Member
Joined
Aug 15, 2008
Messages
4
i have problem when installing Windows 2008 Server 64 bit.
Cpu system always restart after finishing install proces.

CPU configuration :
AMD Opteron 8214 (4 pcs)
TYAN n4250QE server board
ddr2 CORSAIR ECC REGISTER pc667 1GB X 8
HDD SATA 160GB WDC
PS. SilverStone OP-1000
DVDRW PIONEER 20x IDE

Please help me to resolve this problem.

Best Regards,
Adi Fu
 
BSchwarz said:
Must be a driver problem. Does you motherboard need drivers loaded to install?


sata driver successfully loaded.
after all installing process, windows can not boot from harddisc.

Thanks,
 
Hi innova97,

Maybe, I would recommend you to use and review this reference material about the Microsoft Windows 2008 Hyper-V RTM Installation & Configuraiton step by step.

Thanks.

Always keepin' you in touch.
 
Make sure that you're HDD where you want to put the OS is the bootable HDD in you're BIOS. I has the same problem. You can fix this in you're BIOS. as select 1st boot device as HDD insted something else.
Don't use SATA in IDE-mode, that doesn't work also. Put it in AHCI.
and that should work
 
Back
Top