Canot Not Copy Large File On Windows Server.

V

vavramidis

New member
Joined
May 31, 2011
Messages
1
Location
athens
Hi @ all.

i have an HP DL 380 G6 Server
(Windows Server 2007 Standard SP2
Intel XEON CPU X5560 @ 2.80 GHz (2 processors), 4GB RAM ,32bit)

which has the following problem.

I can not copy large files (e.g 2-5G).It stuck on the 'calculating' process. If i press the cancel button, my PC also stuck and i have to reboot it.

This problems appears at his local hard disk (NTFS/RAID 5) and at another one which points with an iSCSI in an EMC Clarion CX120.

The strange thing is that it was working well for a long time and it first came up when we disabled the iSCSI connection due Test Purposes.When we enabled it back, we came across with that situation.

It is not a network issue because i have check all the relative firewall and routing things and nothing has changed.


any ideas guys?

thanks in advance.
 
When you say: "I can not copy large file", from where to where? Local to local?

What I can suggest you is to remove the connection to the iSCSI drive, restart the iSCSI service and reconnect the disk.

Regarding local hard drive... it's strange. Actually you may have a problem with the controller, can you check its status?

Make a try: from a remote pc, connect to the drive which not work on your system (let's say: \\IP_HP\c$\myFolder\MyFile) and at the same time connect to the destination (where do you want to put the file) and let me know if you have the same problem.

Cheers.
 
Back
Top