BSOD during install

[Stefano]

Hi, i tried to install win server 2008r2 oin a server Dell PowerEdge 2850 but i recived a BSOD with this code:
0x000000F4(0x00000003,0xFFFFFA8000906B30,0xFFFFFA8000906E10,0xFFFFF8000C7DCDB0)
Server spec:


Dell PowerEdge 2850 Server

Processor

Two Intel Xeon 3.0GHz / 1 MB Cache Each / 800FSB

Memory Installed

4 GB PC2-3200 DDR-2 400 ECC SDRAM

Hard Drives

2x73GB Ultra320 15K RPM SCSI Drives with trays

Riser Board

Riser Board with 4 PCI-X ports

External Media

DVD

Power Supply

Dual Redundant 550W Hot Plug Power Supplies

Backplane

1 x 6 Bay 80Pin Hot Swap SCSI

Ethernet

Onboard Dual Gigabit Intel 1000 Pro - 2 Ports Total

Video

Embedded ATI Radeon 7000-M with 16MB SDRAM

Form Factor

2U Rack Height

RAID Controller

Dell PERC 4e/Si Hardware RAID with 256MB Cache
What's the problem?
I've downloaded the iso from Microsoft website (trial license).

TYVM,
Stefano

 

[ICTCity]

Do you receive this error DURING the installation or AFTER?

The error code means too many things, hw issue, misconfiguration, driver mismatch and so on. I can remember one user who had this problem, at the end the problem was resolved by replacing the battery...

Take a look at this program:
http://www.0x000000f4.org/

It works only if you can access your system.

Let me know.

 

[Stefano]

i recive the error during installation

 

[ICTCity]

So the problem is a driver, the most probable scenario is your raid controller. Try to install windows server with a direct attacched scsi (bypass the controller) if you can. If not, contact dell to receive the appropiate driver.

 

[Stefano]

ok i'll try and let u know, tnx