Spybot S&D

[Ed Meza]

Hello,
I just upgraded from version 1.4 to 1.5
Problem(s):
1) It takes about 2 minutes to get the Spybot screen loaded before it shows
on the computer screen.
2) I honestly don't know what settings I should have on/off.
3) Thinking of uninstalling version 1.5 & going back to version 1.4.

Any ideas as of why the new version is such a hog on computer resources? Way
too slow to load.
Also, what's the best way to go back to the older version - without
affecting any files that might be left over throughout the system/registry.
Thanks,
Ed

 

[oops!!]

Re: Spybot S&D

Ed,

Read through this:

http://forums.spybot.info/project.php?issueid=85

Zee




"Ed Meza" <tony_nospam24@q.com> wrote in message
news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> Hello,
> I just upgraded from version 1.4 to 1.5
> Problem(s):
> 1) It takes about 2 minutes to get the Spybot screen loaded before it
> shows
> on the computer screen.
> 2) I honestly don't know what settings I should have on/off.
> 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
>
> Any ideas as of why the new version is such a hog on computer resources?
> Way
> too slow to load.
> Also, what's the best way to go back to the older version - without
> affecting any files that might be left over throughout the
> system/registry.
> Thanks,
> Ed
>
>

 

[Heather]

Re: Spybot S&D

Hi Ed.....

After reading thru the link Zee gave, I would suggest you uninstall the
new version and go back to the old one. I assume you have a copy of an
unopened version 1.4. If not, go to oldversion.com and get one.

http://www.oldversion.com/program.php?n=spybot

If you prefer to wait until one of the gurus from over the Pond arises
and has a jolt or two of caffeine, OK. Otherwise, I would say go to
Control Panel and Add/Remove and take it out of there.

I always go thru my registry and also my hard drive (via Windows
Explorer) and remove any blatant leftovers of whatever it is I am
removing.......but I do it ever so carefully. In fact I don't mess with
most of it.

HTH....Heather

"Ed Meza" <tony_nospam24@q.com> wrote in message
news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> Hello,
> I just upgraded from version 1.4 to 1.5
> Problem(s):
> 1) It takes about 2 minutes to get the Spybot screen loaded before it
> shows
> on the computer screen.
> 2) I honestly don't know what settings I should have on/off.
> 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
>
> Any ideas as of why the new version is such a hog on computer
> resources? Way
> too slow to load.
> Also, what's the best way to go back to the older version - without
> affecting any files that might be left over throughout the
> system/registry.
> Thanks,
> Ed
>
>

 

[Ed Meza]

Re: Spybot S&D

Thank you for the info Zee. It's good to know that there are *gurus* in
this NG who know the answers. I appreciate it.
Hi Heather! Apparently there is a patch on the way for version 1.5, so I
will wait a week or so. Otherwise, I will follow your advice.

*Note that there is another issue* with Spybot 1.5 - This has something to
do with the immunization process. I noticed that NOT ALL THE FILES are
protected. This wasn't so with 1.4
Thanks again,
Ed

"Heather" <figgyd@nospam.invalid> wrote in message
news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> Hi Ed.....
>
> After reading thru the link Zee gave, I would suggest you uninstall the
> new version and go back to the old one. I assume you have a copy of an
> unopened version 1.4. If not, go to oldversion.com and get one.
>
> http://www.oldversion.com/program.php?n=spybot
>
> If you prefer to wait until one of the gurus from over the Pond arises
> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
> Control Panel and Add/Remove and take it out of there.
>
> I always go thru my registry and also my hard drive (via Windows
> Explorer) and remove any blatant leftovers of whatever it is I am
> removing.......but I do it ever so carefully. In fact I don't mess with
> most of it.
>
> HTH....Heather
>
> "Ed Meza" <tony_nospam24@q.com> wrote in message
> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> > Hello,
> > I just upgraded from version 1.4 to 1.5
> > Problem(s):
> > 1) It takes about 2 minutes to get the Spybot screen loaded before it
> > shows
> > on the computer screen.
> > 2) I honestly don't know what settings I should have on/off.
> > 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
> >
> > Any ideas as of why the new version is such a hog on computer
> > resources? Way
> > too slow to load.
> > Also, what's the best way to go back to the older version - without
> > affecting any files that might be left over throughout the
> > system/registry.
> > Thanks,
> > Ed
> >
> >
>
>

 

[oops!!]

Re: Spybot S&D

Ed,

Thank you for your comments.

Added info: I am running the Beta test version for this issue:
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip

Without any issues. Problem solved.

In case you want to try it.

Zee



"Ed Meza" <tony_nospam24@q.com> wrote in message
news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> Thank you for the info Zee. It's good to know that there are *gurus* in
> this NG who know the answers. I appreciate it.
> Hi Heather! Apparently there is a patch on the way for version 1.5, so I
> will wait a week or so. Otherwise, I will follow your advice.
>
> *Note that there is another issue* with Spybot 1.5 - This has something to
> do with the immunization process. I noticed that NOT ALL THE FILES are
> protected. This wasn't so with 1.4
> Thanks again,
> Ed
>
> "Heather" <figgyd@nospam.invalid> wrote in message
> news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
>> Hi Ed.....
>>
>> After reading thru the link Zee gave, I would suggest you uninstall the
>> new version and go back to the old one. I assume you have a copy of an
>> unopened version 1.4. If not, go to oldversion.com and get one.
>>
>> http://www.oldversion.com/program.php?n=spybot
>>
>> If you prefer to wait until one of the gurus from over the Pond arises
>> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
>> Control Panel and Add/Remove and take it out of there.
>>
>> I always go thru my registry and also my hard drive (via Windows
>> Explorer) and remove any blatant leftovers of whatever it is I am
>> removing.......but I do it ever so carefully. In fact I don't mess with
>> most of it.
>>
>> HTH....Heather
>>
>> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
>> > Hello,
>> > I just upgraded from version 1.4 to 1.5
>> > Problem(s):
>> > 1) It takes about 2 minutes to get the Spybot screen loaded before it
>> > shows
>> > on the computer screen.
>> > 2) I honestly don't know what settings I should have on/off.
>> > 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
>> >
>> > Any ideas as of why the new version is such a hog on computer
>> > resources? Way
>> > too slow to load.
>> > Also, what's the best way to go back to the older version - without
>> > affecting any files that might be left over throughout the
>> > system/registry.
>> > Thanks,
>> > Ed
>> >
>> >
>>
>>
>
>

 

[webster72n]

Re: Spybot S&D


"oops!!" <notme@nowhere.com> wrote in message
news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
> Ed,
>
> Thank you for your comments.
>
> Added info: I am running the Beta test version for this issue:
>
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
>
> Without any issues. Problem solved.
>
> In case you want to try it.

Zee:
I know this wasn't addressed to me, but it concerns me as well and I took
the freedom to try it for myself. What specifically are the improvements to
be expected from the 'fix'?
I didn't detect any better loading speed than 2 min. and everything else was
the same as before in ver. 1.5, including immunizations. Personally I am
looking forward to seeing the loading speed reduced to at least 0.5 min.
Thanks for the link.

Harry.

>
> Zee
>
>
>
> "Ed Meza" <tony_nospam24@q.com> wrote in message
> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> > Thank you for the info Zee. It's good to know that there are *gurus* in
> > this NG who know the answers. I appreciate it.
> > Hi Heather! Apparently there is a patch on the way for version 1.5, so
I
> > will wait a week or so. Otherwise, I will follow your advice.
> >
> > *Note that there is another issue* with Spybot 1.5 - This has something
to
> > do with the immunization process. I noticed that NOT ALL THE FILES are
> > protected. This wasn't so with 1.4
> > Thanks again,
> > Ed
> >
> > "Heather" <figgyd@nospam.invalid> wrote in message
> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> >> Hi Ed.....
> >>
> >> After reading thru the link Zee gave, I would suggest you uninstall the
> >> new version and go back to the old one. I assume you have a copy of
an
> >> unopened version 1.4. If not, go to oldversion.com and get one.
> >>
> >> http://www.oldversion.com/program.php?n=spybot
> >>
> >> If you prefer to wait until one of the gurus from over the Pond arises
> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
> >> Control Panel and Add/Remove and take it out of there.
> >>
> >> I always go thru my registry and also my hard drive (via Windows
> >> Explorer) and remove any blatant leftovers of whatever it is I am
> >> removing.......but I do it ever so carefully. In fact I don't mess
with
> >> most of it.
> >>
> >> HTH....Heather
> >>
> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> >> > Hello,
> >> > I just upgraded from version 1.4 to 1.5
> >> > Problem(s):
> >> > 1) It takes about 2 minutes to get the Spybot screen loaded before it
> >> > shows
> >> > on the computer screen.
> >> > 2) I honestly don't know what settings I should have on/off.
> >> > 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
> >> >
> >> > Any ideas as of why the new version is such a hog on computer
> >> > resources? Way
> >> > too slow to load.
> >> > Also, what's the best way to go back to the older version - without
> >> > affecting any files that might be left over throughout the
> >> > system/registry.
> >> > Thanks,
> >> > Ed
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

[oops!!]

Re: Spybot S&D

Harry, and others,

In my case that fix was enough to reduce the start delay to a few seconds
compared to over 1 minute.

Your options:

a) Revert to previous version of Spybot S&D (specially if running Win9x
systems);
b) Wait for an update with all fixes;
c) Go through some beta testing:
http://forums.spybot.info/project.php?issueid=76

It seems this new version was 1 step forward and 2 backwards.


Zee



"webster72n" <webster72n@gmail.com> wrote in message
news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
>
> "oops!!" <notme@nowhere.com> wrote in message
> news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
>> Ed,
>>
>> Thank you for your comments.
>>
>> Added info: I am running the Beta test version for this issue:
>>
> http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
>>
>> Without any issues. Problem solved.
>>
>> In case you want to try it.
>
> Zee:
> I know this wasn't addressed to me, but it concerns me as well and I took
> the freedom to try it for myself. What specifically are the improvements
> to
> be expected from the 'fix'?
> I didn't detect any better loading speed than 2 min. and everything else
> was
> the same as before in ver. 1.5, including immunizations. Personally I am
> looking forward to seeing the loading speed reduced to at least 0.5 min.
> Thanks for the link.
>
> Harry.
>
>>
>> Zee
>>
>>
>>
>> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
>> > Thank you for the info Zee. It's good to know that there are *gurus*
>> > in
>> > this NG who know the answers. I appreciate it.
>> > Hi Heather! Apparently there is a patch on the way for version 1.5, so
> I
>> > will wait a week or so. Otherwise, I will follow your advice.
>> >
>> > *Note that there is another issue* with Spybot 1.5 - This has something
> to
>> > do with the immunization process. I noticed that NOT ALL THE FILES are
>> > protected. This wasn't so with 1.4
>> > Thanks again,
>> > Ed
>> >
>> > "Heather" <figgyd@nospam.invalid> wrote in message
>> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
>> >> Hi Ed.....
>> >>
>> >> After reading thru the link Zee gave, I would suggest you uninstall
>> >> the
>> >> new version and go back to the old one. I assume you have a copy of
> an
>> >> unopened version 1.4. If not, go to oldversion.com and get one.
>> >>
>> >> http://www.oldversion.com/program.php?n=spybot
>> >>
>> >> If you prefer to wait until one of the gurus from over the Pond arises
>> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
>> >> Control Panel and Add/Remove and take it out of there.
>> >>
>> >> I always go thru my registry and also my hard drive (via Windows
>> >> Explorer) and remove any blatant leftovers of whatever it is I am
>> >> removing.......but I do it ever so carefully. In fact I don't mess
> with
>> >> most of it.
>> >>
>> >> HTH....Heather
>> >>
>> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
>> >> > Hello,
>> >> > I just upgraded from version 1.4 to 1.5
>> >> > Problem(s):
>> >> > 1) It takes about 2 minutes to get the Spybot screen loaded before
>> >> > it
>> >> > shows
>> >> > on the computer screen.
>> >> > 2) I honestly don't know what settings I should have on/off.
>> >> > 3) Thinking of uninstalling version 1.5 & going back to version 1.4.
>> >> >
>> >> > Any ideas as of why the new version is such a hog on computer
>> >> > resources? Way
>> >> > too slow to load.
>> >> > Also, what's the best way to go back to the older version - without
>> >> > affecting any files that might be left over throughout the
>> >> > system/registry.
>> >> > Thanks,
>> >> > Ed
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

[webster72n]

Re: Spybot S&D



Thanks for the reply, Zee.
Will try to implement, asap and let you know the results.

Harry.

"oops!!" <notme@nowhere.com> wrote in message
news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
> Harry, and others,
>
> In my case that fix was enough to reduce the start delay to a few seconds
> compared to over 1 minute.
>
> Your options:
>
> a) Revert to previous version of Spybot S&D (specially if running Win9x
> systems);
> b) Wait for an update with all fixes;
> c) Go through some beta testing:
> http://forums.spybot.info/project.php?issueid=76
>
> It seems this new version was 1 step forward and 2 backwards.
>
>
> Zee
>
>
>
> "webster72n" <webster72n@gmail.com> wrote in message
> news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
> >
> > "oops!!" <notme@nowhere.com> wrote in message
> > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
> >> Ed,
> >>
> >> Thank you for your comments.
> >>
> >> Added info: I am running the Beta test version for this issue:
> >>
> >
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
> >>
> >> Without any issues. Problem solved.
> >>
> >> In case you want to try it.
> >
> > Zee:
> > I know this wasn't addressed to me, but it concerns me as well and I
took
> > the freedom to try it for myself. What specifically are the improvements
> > to
> > be expected from the 'fix'?
> > I didn't detect any better loading speed than 2 min. and everything else
> > was
> > the same as before in ver. 1.5, including immunizations. Personally I am
> > looking forward to seeing the loading speed reduced to at least 0.5 min.
> > Thanks for the link.
> >
> > Harry.
> >
> >>
> >> Zee
> >>
> >>
> >>
> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> >> > Thank you for the info Zee. It's good to know that there are *gurus*
> >> > in
> >> > this NG who know the answers. I appreciate it.
> >> > Hi Heather! Apparently there is a patch on the way for version 1.5,
so
> > I
> >> > will wait a week or so. Otherwise, I will follow your advice.
> >> >
> >> > *Note that there is another issue* with Spybot 1.5 - This has
something
> > to
> >> > do with the immunization process. I noticed that NOT ALL THE FILES
are
> >> > protected. This wasn't so with 1.4
> >> > Thanks again,
> >> > Ed
> >> >
> >> > "Heather" <figgyd@nospam.invalid> wrote in message
> >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> >> >> Hi Ed.....
> >> >>
> >> >> After reading thru the link Zee gave, I would suggest you uninstall
> >> >> the
> >> >> new version and go back to the old one. I assume you have a copy
of
> > an
> >> >> unopened version 1.4. If not, go to oldversion.com and get one.
> >> >>
> >> >> http://www.oldversion.com/program.php?n=spybot
> >> >>
> >> >> If you prefer to wait until one of the gurus from over the Pond
arises
> >> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
> >> >> Control Panel and Add/Remove and take it out of there.
> >> >>
> >> >> I always go thru my registry and also my hard drive (via Windows
> >> >> Explorer) and remove any blatant leftovers of whatever it is I am
> >> >> removing.......but I do it ever so carefully. In fact I don't mess
> > with
> >> >> most of it.
> >> >>
> >> >> HTH....Heather
> >> >>
> >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> >> >> > Hello,
> >> >> > I just upgraded from version 1.4 to 1.5
> >> >> > Problem(s):
> >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded before
> >> >> > it
> >> >> > shows
> >> >> > on the computer screen.
> >> >> > 2) I honestly don't know what settings I should have on/off.
> >> >> > 3) Thinking of uninstalling version 1.5 & going back to version
1.4.
> >> >> >
> >> >> > Any ideas as of why the new version is such a hog on computer
> >> >> > resources? Way
> >> >> > too slow to load.
> >> >> > Also, what's the best way to go back to the older version -
without
> >> >> > affecting any files that might be left over throughout the
> >> >> > system/registry.
> >> >> > Thanks,
> >> >> > Ed
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

[Ed Meza]

Re: Spybot S&D

Had to revert to version 1.4. Much better than version 1.5 & all is well.
Thanks to all for your help!
Ed
"webster72n" <webster72n@gmail.com> wrote in message
news:uiSoQ2DCIHA.1208@TK2MSFTNGP05.phx.gbl...
>
>
> Thanks for the reply, Zee.
> Will try to implement, asap and let you know the results.
>
> Harry.
>
> "oops!!" <notme@nowhere.com> wrote in message
> news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
> > Harry, and others,
> >
> > In my case that fix was enough to reduce the start delay to a few
seconds
> > compared to over 1 minute.
> >
> > Your options:
> >
> > a) Revert to previous version of Spybot S&D (specially if running Win9x
> > systems);
> > b) Wait for an update with all fixes;
> > c) Go through some beta testing:
> > http://forums.spybot.info/project.php?issueid=76
> >
> > It seems this new version was 1 step forward and 2 backwards.
> >
> >
> > Zee
> >
> >
> >
> > "webster72n" <webster72n@gmail.com> wrote in message
> > news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
> > >
> > > "oops!!" <notme@nowhere.com> wrote in message
> > > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
> > >> Ed,
> > >>
> > >> Thank you for your comments.
> > >>
> > >> Added info: I am running the Beta test version for this issue:
> > >>
> > >
>
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
> > >>
> > >> Without any issues. Problem solved.
> > >>
> > >> In case you want to try it.
> > >
> > > Zee:
> > > I know this wasn't addressed to me, but it concerns me as well and I
> took
> > > the freedom to try it for myself. What specifically are the
improvements
> > > to
> > > be expected from the 'fix'?
> > > I didn't detect any better loading speed than 2 min. and everything
else
> > > was
> > > the same as before in ver. 1.5, including immunizations. Personally I
am
> > > looking forward to seeing the loading speed reduced to at least 0.5
min.
> > > Thanks for the link.
> > >
> > > Harry.
> > >
> > >>
> > >> Zee
> > >>
> > >>
> > >>
> > >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> > >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> > >> > Thank you for the info Zee. It's good to know that there are
*gurus*
> > >> > in
> > >> > this NG who know the answers. I appreciate it.
> > >> > Hi Heather! Apparently there is a patch on the way for version
1.5,
> so
> > > I
> > >> > will wait a week or so. Otherwise, I will follow your advice.
> > >> >
> > >> > *Note that there is another issue* with Spybot 1.5 - This has
> something
> > > to
> > >> > do with the immunization process. I noticed that NOT ALL THE FILES
> are
> > >> > protected. This wasn't so with 1.4
> > >> > Thanks again,
> > >> > Ed
> > >> >
> > >> > "Heather" <figgyd@nospam.invalid> wrote in message
> > >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> > >> >> Hi Ed.....
> > >> >>
> > >> >> After reading thru the link Zee gave, I would suggest you
uninstall
> > >> >> the
> > >> >> new version and go back to the old one. I assume you have a copy
> of
> > > an
> > >> >> unopened version 1.4. If not, go to oldversion.com and get one.
> > >> >>
> > >> >> http://www.oldversion.com/program.php?n=spybot
> > >> >>
> > >> >> If you prefer to wait until one of the gurus from over the Pond
> arises
> > >> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go
to
> > >> >> Control Panel and Add/Remove and take it out of there.
> > >> >>
> > >> >> I always go thru my registry and also my hard drive (via Windows
> > >> >> Explorer) and remove any blatant leftovers of whatever it is I am
> > >> >> removing.......but I do it ever so carefully. In fact I don't
mess
> > > with
> > >> >> most of it.
> > >> >>
> > >> >> HTH....Heather
> > >> >>
> > >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> > >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> > >> >> > Hello,
> > >> >> > I just upgraded from version 1.4 to 1.5
> > >> >> > Problem(s):
> > >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded
before
> > >> >> > it
> > >> >> > shows
> > >> >> > on the computer screen.
> > >> >> > 2) I honestly don't know what settings I should have on/off.
> > >> >> > 3) Thinking of uninstalling version 1.5 & going back to version
> 1.4.
> > >> >> >
> > >> >> > Any ideas as of why the new version is such a hog on computer
> > >> >> > resources? Way
> > >> >> > too slow to load.
> > >> >> > Also, what's the best way to go back to the older version -
> without
> > >> >> > affecting any files that might be left over throughout the
> > >> >> > system/registry.
> > >> >> > Thanks,
> > >> >> > Ed
> > >> >> >
> > >> >> >
> > >> >>
> > >> >>
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
> >
>
>

 

[Heather]

Re: Spybot S&D

Good......glad to see that it solved your problems. I swear they all
rush things out way too fast and there are inevitable problems. Does
the word "Vista" come to mind????? (VBG)

Figgs

"Ed Meza" <tony_nospam24@q.com> wrote in message
news:uV6yMPjCIHA.5328@TK2MSFTNGP05.phx.gbl...
> Had to revert to version 1.4. Much better than version 1.5 & all is
> well.
> Thanks to all for your help!
> Ed
> "webster72n" <webster72n@gmail.com> wrote in message
> news:uiSoQ2DCIHA.1208@TK2MSFTNGP05.phx.gbl...
>>
>>
>> Thanks for the reply, Zee.
>> Will try to implement, asap and let you know the results.
>>
>> Harry.
>>
>> "oops!!" <notme@nowhere.com> wrote in message
>> news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
>> > Harry, and others,
>> >
>> > In my case that fix was enough to reduce the start delay to a few
> seconds
>> > compared to over 1 minute.
>> >
>> > Your options:
>> >
>> > a) Revert to previous version of Spybot S&D (specially if running
>> > Win9x
>> > systems);
>> > b) Wait for an update with all fixes;
>> > c) Go through some beta testing:
>> > http://forums.spybot.info/project.php?issueid=76
>> >
>> > It seems this new version was 1 step forward and 2 backwards.
>> >
>> >
>> > Zee
>> >
>> >
>> >
>> > "webster72n" <webster72n@gmail.com> wrote in message
>> > news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
>> > >
>> > > "oops!!" <notme@nowhere.com> wrote in message
>> > > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
>> > >> Ed,
>> > >>
>> > >> Thank you for your comments.
>> > >>
>> > >> Added info: I am running the Beta test version for this issue:
>> > >>
>> > >
>>
> http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
>> > >>
>> > >> Without any issues. Problem solved.
>> > >>
>> > >> In case you want to try it.
>> > >
>> > > Zee:
>> > > I know this wasn't addressed to me, but it concerns me as well
>> > > and I
>> took
>> > > the freedom to try it for myself. What specifically are the
> improvements
>> > > to
>> > > be expected from the 'fix'?
>> > > I didn't detect any better loading speed than 2 min. and
>> > > everything
> else
>> > > was
>> > > the same as before in ver. 1.5, including immunizations.
>> > > Personally I
> am
>> > > looking forward to seeing the loading speed reduced to at least
>> > > 0.5
> min.
>> > > Thanks for the link.
>> > >
>> > > Harry.
>> > >
>> > >>
>> > >> Zee
>> > >>
>> > >>
>> > >>
>> > >> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> > >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
>> > >> > Thank you for the info Zee. It's good to know that there are
> *gurus*
>> > >> > in
>> > >> > this NG who know the answers. I appreciate it.
>> > >> > Hi Heather! Apparently there is a patch on the way for
>> > >> > version
> 1.5,
>> so
>> > > I
>> > >> > will wait a week or so. Otherwise, I will follow your advice.
>> > >> >
>> > >> > *Note that there is another issue* with Spybot 1.5 - This has
>> something
>> > > to
>> > >> > do with the immunization process. I noticed that NOT ALL THE
>> > >> > FILES
>> are
>> > >> > protected. This wasn't so with 1.4
>> > >> > Thanks again,
>> > >> > Ed
>> > >> >
>> > >> > "Heather" <figgyd@nospam.invalid> wrote in message
>> > >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
>> > >> >> Hi Ed.....
>> > >> >>
>> > >> >> After reading thru the link Zee gave, I would suggest you
> uninstall
>> > >> >> the
>> > >> >> new version and go back to the old one. I assume you have a
>> > >> >> copy
>> of
>> > > an
>> > >> >> unopened version 1.4. If not, go to oldversion.com and get
>> > >> >> one.
>> > >> >>
>> > >> >> http://www.oldversion.com/program.php?n=spybot
>> > >> >>
>> > >> >> If you prefer to wait until one of the gurus from over the
>> > >> >> Pond
>> arises
>> > >> >> and has a jolt or two of caffeine, OK. Otherwise, I would
>> > >> >> say go
> to
>> > >> >> Control Panel and Add/Remove and take it out of there.
>> > >> >>
>> > >> >> I always go thru my registry and also my hard drive (via
>> > >> >> Windows
>> > >> >> Explorer) and remove any blatant leftovers of whatever it is
>> > >> >> I am
>> > >> >> removing.......but I do it ever so carefully. In fact I
>> > >> >> don't
> mess
>> > > with
>> > >> >> most of it.
>> > >> >>
>> > >> >> HTH....Heather
>> > >> >>
>> > >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> > >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
>> > >> >> > Hello,
>> > >> >> > I just upgraded from version 1.4 to 1.5
>> > >> >> > Problem(s):
>> > >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded
> before
>> > >> >> > it
>> > >> >> > shows
>> > >> >> > on the computer screen.
>> > >> >> > 2) I honestly don't know what settings I should have
>> > >> >> > on/off.
>> > >> >> > 3) Thinking of uninstalling version 1.5 & going back to
>> > >> >> > version
>> 1.4.
>> > >> >> >
>> > >> >> > Any ideas as of why the new version is such a hog on
>> > >> >> > computer
>> > >> >> > resources? Way
>> > >> >> > too slow to load.
>> > >> >> > Also, what's the best way to go back to the older version -
>> without
>> > >> >> > affecting any files that might be left over throughout the
>> > >> >> > system/registry.
>> > >> >> > Thanks,
>> > >> >> > Ed
>> > >> >> >
>> > >> >> >
>> > >> >>
>> > >> >>
>> > >> >
>> > >> >
>> > >>
>> > >>
>> > >
>> > >
>> >
>> >
>>
>>
>
>

 

[webster72n]

Re: Spybot S&D


Zee:

After giving it a lot of thought, I decided to stick with the latest
version.
The delay in loading is made up by the improvements to immunnizations etc.
A matter of personal preference, I suppose.

Harry.


"oops!!" <notme@nowhere.com> wrote in message
news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
> Harry, and others,
>
> In my case that fix was enough to reduce the start delay to a few seconds
> compared to over 1 minute.
>
> Your options:
>
> a) Revert to previous version of Spybot S&D (specially if running Win9x
> systems);
> b) Wait for an update with all fixes;
> c) Go through some beta testing:
> http://forums.spybot.info/project.php?issueid=76
>
> It seems this new version was 1 step forward and 2 backwards.
>
>
> Zee
>
>
>
> "webster72n" <webster72n@gmail.com> wrote in message
> news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
> >
> > "oops!!" <notme@nowhere.com> wrote in message
> > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
> >> Ed,
> >>
> >> Thank you for your comments.
> >>
> >> Added info: I am running the Beta test version for this issue:
> >>
> >
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
> >>
> >> Without any issues. Problem solved.
> >>
> >> In case you want to try it.
> >
> > Zee:
> > I know this wasn't addressed to me, but it concerns me as well and I
took
> > the freedom to try it for myself. What specifically are the improvements
> > to
> > be expected from the 'fix'?
> > I didn't detect any better loading speed than 2 min. and everything else
> > was
> > the same as before in ver. 1.5, including immunizations. Personally I am
> > looking forward to seeing the loading speed reduced to at least 0.5 min.
> > Thanks for the link.
> >
> > Harry.
> >
> >>
> >> Zee
> >>
> >>
> >>
> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> >> > Thank you for the info Zee. It's good to know that there are *gurus*
> >> > in
> >> > this NG who know the answers. I appreciate it.
> >> > Hi Heather! Apparently there is a patch on the way for version 1.5,
so
> > I
> >> > will wait a week or so. Otherwise, I will follow your advice.
> >> >
> >> > *Note that there is another issue* with Spybot 1.5 - This has
something
> > to
> >> > do with the immunization process. I noticed that NOT ALL THE FILES
are
> >> > protected. This wasn't so with 1.4
> >> > Thanks again,
> >> > Ed
> >> >
> >> > "Heather" <figgyd@nospam.invalid> wrote in message
> >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> >> >> Hi Ed.....
> >> >>
> >> >> After reading thru the link Zee gave, I would suggest you uninstall
> >> >> the
> >> >> new version and go back to the old one. I assume you have a copy
of
> > an
> >> >> unopened version 1.4. If not, go to oldversion.com and get one.
> >> >>
> >> >> http://www.oldversion.com/program.php?n=spybot
> >> >>
> >> >> If you prefer to wait until one of the gurus from over the Pond
arises
> >> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go to
> >> >> Control Panel and Add/Remove and take it out of there.
> >> >>
> >> >> I always go thru my registry and also my hard drive (via Windows
> >> >> Explorer) and remove any blatant leftovers of whatever it is I am
> >> >> removing.......but I do it ever so carefully. In fact I don't mess
> > with
> >> >> most of it.
> >> >>
> >> >> HTH....Heather
> >> >>
> >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> >> >> > Hello,
> >> >> > I just upgraded from version 1.4 to 1.5
> >> >> > Problem(s):
> >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded before
> >> >> > it
> >> >> > shows
> >> >> > on the computer screen.
> >> >> > 2) I honestly don't know what settings I should have on/off.
> >> >> > 3) Thinking of uninstalling version 1.5 & going back to version
1.4.
> >> >> >
> >> >> > Any ideas as of why the new version is such a hog on computer
> >> >> > resources? Way
> >> >> > too slow to load.
> >> >> > Also, what's the best way to go back to the older version -
without
> >> >> > affecting any files that might be left over throughout the
> >> >> > system/registry.
> >> >> > Thanks,
> >> >> > Ed
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

[oops!!]

Re: Spybot S&D

Hi Harry,

Running it too, but patched with the Beta fixes, and no problems (cross
fingers).

Zee



"webster72n" <webster72n@gmail.com> wrote in message
news:eEmG171CIHA.2268@TK2MSFTNGP02.phx.gbl...
>
> Zee:
>
> After giving it a lot of thought, I decided to stick with the latest
> version.
> The delay in loading is made up by the improvements to immunnizations etc.
> A matter of personal preference, I suppose.
>
> Harry.
>
>
> "oops!!" <notme@nowhere.com> wrote in message
> news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
>> Harry, and others,
>>
>> In my case that fix was enough to reduce the start delay to a few seconds
>> compared to over 1 minute.
>>
>> Your options:
>>
>> a) Revert to previous version of Spybot S&D (specially if running Win9x
>> systems);
>> b) Wait for an update with all fixes;
>> c) Go through some beta testing:
>> http://forums.spybot.info/project.php?issueid=76
>>
>> It seems this new version was 1 step forward and 2 backwards.
>>
>>
>> Zee
>>
>>
>>
>> "webster72n" <webster72n@gmail.com> wrote in message
>> news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
>> >
>> > "oops!!" <notme@nowhere.com> wrote in message
>> > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
>> >> Ed,
>> >>
>> >> Thank you for your comments.
>> >>
>> >> Added info: I am running the Beta test version for this issue:
>> >>
>> >
> http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
>> >>
>> >> Without any issues. Problem solved.
>> >>
>> >> In case you want to try it.
>> >
>> > Zee:
>> > I know this wasn't addressed to me, but it concerns me as well and I
> took
>> > the freedom to try it for myself. What specifically are the
>> > improvements
>> > to
>> > be expected from the 'fix'?
>> > I didn't detect any better loading speed than 2 min. and everything
>> > else
>> > was
>> > the same as before in ver. 1.5, including immunizations. Personally I
>> > am
>> > looking forward to seeing the loading speed reduced to at least 0.5
>> > min.
>> > Thanks for the link.
>> >
>> > Harry.
>> >
>> >>
>> >> Zee
>> >>
>> >>
>> >>
>> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
>> >> > Thank you for the info Zee. It's good to know that there are
>> >> > *gurus*
>> >> > in
>> >> > this NG who know the answers. I appreciate it.
>> >> > Hi Heather! Apparently there is a patch on the way for version 1.5,
> so
>> > I
>> >> > will wait a week or so. Otherwise, I will follow your advice.
>> >> >
>> >> > *Note that there is another issue* with Spybot 1.5 - This has
> something
>> > to
>> >> > do with the immunization process. I noticed that NOT ALL THE FILES
> are
>> >> > protected. This wasn't so with 1.4
>> >> > Thanks again,
>> >> > Ed
>> >> >
>> >> > "Heather" <figgyd@nospam.invalid> wrote in message
>> >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
>> >> >> Hi Ed.....
>> >> >>
>> >> >> After reading thru the link Zee gave, I would suggest you uninstall
>> >> >> the
>> >> >> new version and go back to the old one. I assume you have a copy
> of
>> > an
>> >> >> unopened version 1.4. If not, go to oldversion.com and get one.
>> >> >>
>> >> >> http://www.oldversion.com/program.php?n=spybot
>> >> >>
>> >> >> If you prefer to wait until one of the gurus from over the Pond
> arises
>> >> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go
>> >> >> to
>> >> >> Control Panel and Add/Remove and take it out of there.
>> >> >>
>> >> >> I always go thru my registry and also my hard drive (via Windows
>> >> >> Explorer) and remove any blatant leftovers of whatever it is I am
>> >> >> removing.......but I do it ever so carefully. In fact I don't mess
>> > with
>> >> >> most of it.
>> >> >>
>> >> >> HTH....Heather
>> >> >>
>> >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
>> >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
>> >> >> > Hello,
>> >> >> > I just upgraded from version 1.4 to 1.5
>> >> >> > Problem(s):
>> >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded
>> >> >> > before
>> >> >> > it
>> >> >> > shows
>> >> >> > on the computer screen.
>> >> >> > 2) I honestly don't know what settings I should have on/off.
>> >> >> > 3) Thinking of uninstalling version 1.5 & going back to version
> 1.4.
>> >> >> >
>> >> >> > Any ideas as of why the new version is such a hog on computer
>> >> >> > resources? Way
>> >> >> > too slow to load.
>> >> >> > Also, what's the best way to go back to the older version -
> without
>> >> >> > affecting any files that might be left over throughout the
>> >> >> > system/registry.
>> >> >> > Thanks,
>> >> >> > Ed
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

[webster72n]

Re: Spybot S&D


Didn't need any Beta fixes, Zee and am hoping that they eventually shorten
the extensive loading time, as promised by a top team member in their forum.
Happy surfing,

Harry.


"oops!!" <notme@nowhere.com> wrote in message
news:uXlO3X5CIHA.1168@TK2MSFTNGP02.phx.gbl...
> Hi Harry,
>
> Running it too, but patched with the Beta fixes, and no problems (cross
> fingers).
>
> Zee
>
>
>
> "webster72n" <webster72n@gmail.com> wrote in message
> news:eEmG171CIHA.2268@TK2MSFTNGP02.phx.gbl...
> >
> > Zee:
> >
> > After giving it a lot of thought, I decided to stick with the latest
> > version.
> > The delay in loading is made up by the improvements to immunnizations
etc.
> > A matter of personal preference, I suppose.
> >
> > Harry.
> >
> >
> > "oops!!" <notme@nowhere.com> wrote in message
> > news:eN7zhkDCIHA.5652@TK2MSFTNGP02.phx.gbl...
> >> Harry, and others,
> >>
> >> In my case that fix was enough to reduce the start delay to a few
seconds
> >> compared to over 1 minute.
> >>
> >> Your options:
> >>
> >> a) Revert to previous version of Spybot S&D (specially if running Win9x
> >> systems);
> >> b) Wait for an update with all fixes;
> >> c) Go through some beta testing:
> >> http://forums.spybot.info/project.php?issueid=76
> >>
> >> It seems this new version was 1 step forward and 2 backwards.
> >>
> >>
> >> Zee
> >>
> >>
> >>
> >> "webster72n" <webster72n@gmail.com> wrote in message
> >> news:usGFpO7BIHA.1188@TK2MSFTNGP04.phx.gbl...
> >> >
> >> > "oops!!" <notme@nowhere.com> wrote in message
> >> > news:%23Y2Ogm5BIHA.6012@TK2MSFTNGP03.phx.gbl...
> >> >> Ed,
> >> >>
> >> >> Thank you for your comments.
> >> >>
> >> >> Added info: I am running the Beta test version for this issue:
> >> >>
> >> >
> >
http://www.safer-networking.org/fil...1.5.1.16-2007-09-24-issues-76-78-79-84-85.zip
> >> >>
> >> >> Without any issues. Problem solved.
> >> >>
> >> >> In case you want to try it.
> >> >
> >> > Zee:
> >> > I know this wasn't addressed to me, but it concerns me as well and I
> > took
> >> > the freedom to try it for myself. What specifically are the
> >> > improvements
> >> > to
> >> > be expected from the 'fix'?
> >> > I didn't detect any better loading speed than 2 min. and everything
> >> > else
> >> > was
> >> > the same as before in ver. 1.5, including immunizations. Personally I
> >> > am
> >> > looking forward to seeing the loading speed reduced to at least 0.5
> >> > min.
> >> > Thanks for the link.
> >> >
> >> > Harry.
> >> >
> >> >>
> >> >> Zee
> >> >>
> >> >>
> >> >>
> >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> >> news:upBJMj3BIHA.1356@TK2MSFTNGP03.phx.gbl...
> >> >> > Thank you for the info Zee. It's good to know that there are
> >> >> > *gurus*
> >> >> > in
> >> >> > this NG who know the answers. I appreciate it.
> >> >> > Hi Heather! Apparently there is a patch on the way for version
1.5,
> > so
> >> > I
> >> >> > will wait a week or so. Otherwise, I will follow your advice.
> >> >> >
> >> >> > *Note that there is another issue* with Spybot 1.5 - This has
> > something
> >> > to
> >> >> > do with the immunization process. I noticed that NOT ALL THE
FILES
> > are
> >> >> > protected. This wasn't so with 1.4
> >> >> > Thanks again,
> >> >> > Ed
> >> >> >
> >> >> > "Heather" <figgyd@nospam.invalid> wrote in message
> >> >> > news:uXVrdTwBIHA.484@TK2MSFTNGP06.phx.gbl...
> >> >> >> Hi Ed.....
> >> >> >>
> >> >> >> After reading thru the link Zee gave, I would suggest you
uninstall
> >> >> >> the
> >> >> >> new version and go back to the old one. I assume you have a
copy
> > of
> >> > an
> >> >> >> unopened version 1.4. If not, go to oldversion.com and get one.
> >> >> >>
> >> >> >> http://www.oldversion.com/program.php?n=spybot
> >> >> >>
> >> >> >> If you prefer to wait until one of the gurus from over the Pond
> > arises
> >> >> >> and has a jolt or two of caffeine, OK. Otherwise, I would say go
> >> >> >> to
> >> >> >> Control Panel and Add/Remove and take it out of there.
> >> >> >>
> >> >> >> I always go thru my registry and also my hard drive (via Windows
> >> >> >> Explorer) and remove any blatant leftovers of whatever it is I am
> >> >> >> removing.......but I do it ever so carefully. In fact I don't
mess
> >> > with
> >> >> >> most of it.
> >> >> >>
> >> >> >> HTH....Heather
> >> >> >>
> >> >> >> "Ed Meza" <tony_nospam24@q.com> wrote in message
> >> >> >> news:OSHrEotBIHA.5196@TK2MSFTNGP02.phx.gbl...
> >> >> >> > Hello,
> >> >> >> > I just upgraded from version 1.4 to 1.5
> >> >> >> > Problem(s):
> >> >> >> > 1) It takes about 2 minutes to get the Spybot screen loaded
> >> >> >> > before
> >> >> >> > it
> >> >> >> > shows
> >> >> >> > on the computer screen.
> >> >> >> > 2) I honestly don't know what settings I should have on/off.
> >> >> >> > 3) Thinking of uninstalling version 1.5 & going back to version
> > 1.4.
> >> >> >> >
> >> >> >> > Any ideas as of why the new version is such a hog on computer
> >> >> >> > resources? Way
> >> >> >> > too slow to load.
> >> >> >> > Also, what's the best way to go back to the older version -
> > without
> >> >> >> > affecting any files that might be left over throughout the
> >> >> >> > system/registry.
> >> >> >> > Thanks,
> >> >> >> > Ed
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>