O
Overheal
Guest
Im trying to get a third partition set up for XP - parition 1 is Vista (OEM
installed - HP) partition 2 is my HP_RECOVERY drive, and partition 3 for XP.
The XP partition I managed to create by shrinking the free space left on P2
- but its too small to install XP, let alone run anything (I think.... its
1.77 GB)
*******
BUT when I try to shrink any space out of volume C either one of two things
happen:
- sometimes the disk manager will display a couple megabytes of available
space for shrinking
- the rest of the time the disk will show 46 GB (46877 MB)
on its good days I will try to ask the volume to shrink 20480 MB (20 GB) out
of volume C, but I get an error:
"There is not enough free space to perform this operation"
I've got RAM, I've got Disk Space.... <_<
***********************
so my next approach was to run the CMD Shell under the administrator and use
the diskpart program: here be the result
********************************************
Setting SDK environment relative to C:\Program Files\Microsoft
SDKs\Windows\v6.0
..
Targeting Windows Vista x86 DEBUG
C:\Windows\system32>diskpart
Microsoft DiskPart version 6.0.6000
Copyright (C) 1999-2007 Microsoft Corporation.
On computer: TACHIKOMA
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ---------- ------- ------- --- ---
Disk 0 Online 186 GB 504 KB
DISKPART> list partition
There is no disk selected to list partitions.
Select a disk and try again.
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- ---------
--------
Volume 0 F DVD-ROM 0 B No Media
Volume 1 E SIMCITY4 CDFS DVD-ROM 557 MB Healthy
Volume 2 C NTFS Partition 178 GB Healthy System
Volume 3 D HP_RECOVERY NTFS Partition 6747 MB Healthy
Volume 4 B XP NTFS Partition 1812 MB Healthy
DISKPART> select disk=0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 178 GB 32 KB
Partition 2 Primary 6747 MB 178 GB
Partition 3 Primary 1812 MB 185 GB
DISKPART> select partition=1
Partition 1 is now the selected partition.
DISKPART> select volume=2
Volume 2 is the selected volume.
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- ---------
--------
Volume 0 F DVD-ROM 0 B No Media
Volume 1 E SIMCITY4 CDFS DVD-ROM 557 MB Healthy
* Volume 2 C NTFS Partition 178 GB Healthy System
Volume 3 D HP_RECOVERY NTFS Partition 6747 MB Healthy
Volume 4 B XP NTFS Partition 1812 MB Healthy
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 Primary 178 GB 32 KB
Partition 2 Primary 6747 MB 178 GB
Partition 3 Primary 1812 MB 185 GB
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ---------- ------- ------- --- ---
* Disk 0 Online 186 GB 504 KB
DISKPART> shrink querymax
The maximum number of reclaimable bytes is: 46 GB
DISKPART> shrink desired=2048 minimum=1024
The specified shrink size is too large.
DISKPART> shrink desired=4 minimum=2
DiskPart successfully shrunk the volume by: 4096 KB
DISKPART>
**********************************************
Now, happy as I am to reclaim 4MB of free space, I would like to know why I
cant pull 1 GB at a time at the very least.
Does it actually have something to do with the RAM? Can you only pull out at
any one time as much free RAM as you have? At the moment I am currently
munching.... 1032MB of 2046MB.
So, I will attempt now to reclaim a little ram here and try again...... down
to 941 after closing a couple bits and ends *god this OS consumes a lot*
Now to attempt to reclaim 1024 MB
************
DISKPART> shrink desired=20480 minimum=1024
// RAM is not spiking above 960MB...... CPU cores are roughly at/below 50%
with fluctuations.....
The specified shrink size is too large
DISKPART> shrink desired=1024 desired=512
The specified shrink size is too large
DISKPART>
********************************************************
So, Im at a bit of a loss, and would like to know if anyone has solved
this/can help/ is part of the microsoft development team and is at least
working on the problem!
;_;
installed - HP) partition 2 is my HP_RECOVERY drive, and partition 3 for XP.
The XP partition I managed to create by shrinking the free space left on P2
- but its too small to install XP, let alone run anything (I think.... its
1.77 GB)
*******
BUT when I try to shrink any space out of volume C either one of two things
happen:
- sometimes the disk manager will display a couple megabytes of available
space for shrinking
- the rest of the time the disk will show 46 GB (46877 MB)
on its good days I will try to ask the volume to shrink 20480 MB (20 GB) out
of volume C, but I get an error:
"There is not enough free space to perform this operation"
I've got RAM, I've got Disk Space.... <_<
***********************
so my next approach was to run the CMD Shell under the administrator and use
the diskpart program: here be the result
********************************************
Setting SDK environment relative to C:\Program Files\Microsoft
SDKs\Windows\v6.0
..
Targeting Windows Vista x86 DEBUG
C:\Windows\system32>diskpart
Microsoft DiskPart version 6.0.6000
Copyright (C) 1999-2007 Microsoft Corporation.
On computer: TACHIKOMA
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ---------- ------- ------- --- ---
Disk 0 Online 186 GB 504 KB
DISKPART> list partition
There is no disk selected to list partitions.
Select a disk and try again.
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- ---------
--------
Volume 0 F DVD-ROM 0 B No Media
Volume 1 E SIMCITY4 CDFS DVD-ROM 557 MB Healthy
Volume 2 C NTFS Partition 178 GB Healthy System
Volume 3 D HP_RECOVERY NTFS Partition 6747 MB Healthy
Volume 4 B XP NTFS Partition 1812 MB Healthy
DISKPART> select disk=0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 178 GB 32 KB
Partition 2 Primary 6747 MB 178 GB
Partition 3 Primary 1812 MB 185 GB
DISKPART> select partition=1
Partition 1 is now the selected partition.
DISKPART> select volume=2
Volume 2 is the selected volume.
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- ---------
--------
Volume 0 F DVD-ROM 0 B No Media
Volume 1 E SIMCITY4 CDFS DVD-ROM 557 MB Healthy
* Volume 2 C NTFS Partition 178 GB Healthy System
Volume 3 D HP_RECOVERY NTFS Partition 6747 MB Healthy
Volume 4 B XP NTFS Partition 1812 MB Healthy
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 Primary 178 GB 32 KB
Partition 2 Primary 6747 MB 178 GB
Partition 3 Primary 1812 MB 185 GB
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ---------- ------- ------- --- ---
* Disk 0 Online 186 GB 504 KB
DISKPART> shrink querymax
The maximum number of reclaimable bytes is: 46 GB
DISKPART> shrink desired=2048 minimum=1024
The specified shrink size is too large.
DISKPART> shrink desired=4 minimum=2
DiskPart successfully shrunk the volume by: 4096 KB
DISKPART>
**********************************************
Now, happy as I am to reclaim 4MB of free space, I would like to know why I
cant pull 1 GB at a time at the very least.
Does it actually have something to do with the RAM? Can you only pull out at
any one time as much free RAM as you have? At the moment I am currently
munching.... 1032MB of 2046MB.
So, I will attempt now to reclaim a little ram here and try again...... down
to 941 after closing a couple bits and ends *god this OS consumes a lot*
Now to attempt to reclaim 1024 MB
************
DISKPART> shrink desired=20480 minimum=1024
// RAM is not spiking above 960MB...... CPU cores are roughly at/below 50%
with fluctuations.....
The specified shrink size is too large
DISKPART> shrink desired=1024 desired=512
The specified shrink size is too large
DISKPART>
********************************************************
So, Im at a bit of a loss, and would like to know if anyone has solved
this/can help/ is part of the microsoft development team and is at least
working on the problem!
;_;