Re: Windows x64 Edition won't start after Avast Update
By having complete access, what do you mean? I thought you said you
couldn't boot it when you tried it. Are you saying you can install it in
the other computer, access it from the system originally installed on that
computer, but just can't boot to it? How did you try. As I said before, if
you can't even boot to the XP cd on the other MOBO, you have a problem with
the MOBO or bios, that may have caused problems with your hd.
When the drive is installed on the other computer, have you tried
disconnecting the other drives and doing a fixmbr and fixboot from the XP
cd?
Then seeing if it will boot.
"BillBled" <BillBled@discussions.microsoft.com> wrote in message
news:78D39CF1-BD4D-4919-B1C7-B4946B3795A0@microsoft.com...
> Hi John,
> Thanks for replying.
> I do have complete access to the drive when it is running on my other
> computer, which is also a x64 box. My limitation is that I'm trying to
> figure
> out (or be told) what utilitiies I can use within the x64 environment,
> since
> that is 100% what I am dealing with. I didn't think that all of the normal
> XP
> (32bit) tools would work in the x64 realm.
>
> I'm going to run the HD diagnostics from Seagate, but do you have any
> specific diagnostics that come to mind with respect to the x64 O/S? I ran
> chkdsk /f last night and it said it fixed some things - but still no boot
> when I tried the drive by itself.
>
> I realize I can just format the drive, and reload x64 and go from there,
> but
> that's not really the point. I'm trying to understand what went wrong and
> repair it.
> Thanks for everyone's help and ideas!
> -Bill
>
> "John Barnes" wrote:
>
>> The last listed item is the last one that successfully loaded, not the
>> problem one. You could try installing a good system into your problem
>> machine. That you say you cannot get to recovery console or boot the XP
>> install cd has nothing to do with anything past the BIOS. The install cd
>> goes past the license agreement (and recovery console) with no HD, as
>> when
>> you haven't installed necessary SATA drivers. You should therefore try to
>> do
>> your repairs from one of the other machines where you can access the boot
>> files, fixmbr and fixboot.
>>
>>
>> "BillBled" <BillBled@discussions.microsoft.com> wrote in message
>> news:FEE6D0B5-C0CD-4685-BF43-A638F52F8677@microsoft.com...
>> > Tony,
>> > Yes, flashing the BIOS was after the Avast upgrade and part of my
>> > attempt
>> > to
>> > repair. Also, I have another identical machine (I've actually built 3
>> > of
>> > these the exact same way) and I have removed the hard drive out of the
>> > problem machine and put it in the other one, which boots fine with its
>> > own
>> > normal hard drive. When I install the problem HD into it, it acts the
>> > exact
>> > same way - no boot. So I am pretty sure that something has happened to
>> > the
>> > hard drive itself. It's not a problem on the motherboard or with SATA
>> > cables
>> > or CMOS batteries or resets. If it was, then when I moved the HD to the
>> > other
>> > machine, the behaviour would be different. It isn't. It's identical. No
>> > boot,
>> > and when I do actually get into Safe Mode, it stops at the same place
>> > (biosinfo.inf).
>> >
>> > And speaking on that, I thought that the file biosinfo.inf might be a
>> > problem. So I copied it from the twin machine back to the damaged one.
>> > Still
>> > no difference. Exact same result - no boot, etc.
>> >
>> > I really think something is wrong in the boot files that was corrupted
>> > when
>> > the Avast update was done. I do not believe it is any sort of hardware
>> > issue,
>> > since when I move the HD to the twin machine (which runs fine) I get
>> > the
>> > same
>> > results.
>> > Thanks,
>> > --Bill
>> >
>> > "Tony Sperling mail.dk>" wrote:
>> >
>> >> Well, this is close to what I am having. In addition to the BIOS
>> >> thing, I
>> >> want to draw attention to the SATA cables as one possible weak point.
>> >> They
>> >> are rather stiff and routing them around the case could result in them
>> >> having tension that wants to pull them out of their sockets. They
>> >> aren't
>> >> snapping on very tightly in their sockets anyway and I had to apply a
>> >> half-turn sideway twist before looping them around between the HD and
>> >> the
>> >> MB. This is hard to explain in graphical language, but I think you'll
>> >> probably see what I'm driving at.
>> >>
>> >> While you are inside, you might as well reseat everything else too,
>> >> just
>> >> unfasten and give everything a gentle 'wiggle' and fasten it again.
>> >> Then
>> >> let's see how it behaves. You should at least be able to boot from a
>> >> CD/DVD.
>> >> Hopefully!
>> >>
>> >> Oh - and flashing the BIOS, was that after the Avast upgrade?
>> >>
>> >>
>> >> Tony. . .
>> >>
>> >>
>> >>
>> >> "BillBled" <BillBled@discussions.microsoft.com> wrote in message
>> >> news:2F343F93-2C7B-4649-9D78-A44760AE8ADE@microsoft.com...
>> >> > Hi Tony,
>> >> > Thanks for taking the time to reply.
>> >> > To answer your questions:
>> >> > 1- The system was built in June 2006.
>> >> > 2- It is not a dual boot box. Only boots to x64 Windows.
>> >> > 3- Avast was installed from the beginning.
>> >> > 4- One HD. Seagate, 320GB, SATAII - no RAID
>> >> > 5- I have flashed the BIOS to the latest one. No difference.
>> >> > Flashing
>> >> > resets
>> >> > the BIOS just like removing the battery (I think). At any rate, it
>> >> > didn't
>> >> > help.
>> >> >
>> >> > Motherboard is ASUS A8N32-SLI Deluxe, BIOS 1303
>> >> > Processor is AMD Athlon 64 x2 at 4200+ Dual Core (socket 939)
>> >> > RAM is 2GB Corsair XMS RAM
>> >> > HD is Seagate ST3320620AS
>> >> > Video card is Matrox Quad card, QID-E128-LPAF
>> >> > Power supply is Antec 550w TruePower 2.0
>> >> >
>> >> > This system has been rock solid from the time it was built until the
>> >> > Avast
>> >> > update Thursday night.
>> >> > Thanks again for your responise.
>> >> > --Bill
>> >> >
>> >> >
>> >> > "Tony Sperling mail.dk>" wrote:
>> >> >
>> >> >> Hi Bill,
>> >> >>
>> >> >> I have been running Avast myself for more than two years now, I
>> >> >> think.
>> >> >> My
>> >> >> machines are updating automatically, sometimes several times a day,
>> >> >> never
>> >> >> had a problem. Something can easily have been corrupted in that
>> >> >> update,
>> >> >> but
>> >> >> I am positive it is not Avast that did it. Anything you download
>> >> >> may
>> >> >> be
>> >> >> corrupted along the 'line' at any time and these updates are not
>> >> >> trivial,
>> >> >> in
>> >> >> a running system.
>> >> >>
>> >> >> On the other hand, it doesn't sound to me as something that HAS to
>> >> >> be
>> >> >> software related - how old is the system you've built? How long
>> >> >> since
>> >> >> Avast
>> >> >> was installed? Are you 'Dual-Booting'? How many HD's? IDE, SCSI,
>> >> >> RAID
>> >> >> or
>> >> >> SATA?
>> >> >>
>> >> >> If nobody else here objects, I would probably first try and remove
>> >> >> the
>> >> >> CMOS
>> >> >> battery for a few minutes (maybe ten?) - this will reset the BIOS
>> >> >> and
>> >> >> [should] be harmless.
>> >> >>
>> >> >>
>> >> >> Tony. . .
>> >> >>
>> >> >>
>> >> >> "BillBled" <BillBled@discussions.microsoft.com> wrote in message
>> >> >> news:3DE47E52-F482-48B3-A242-C9DB3FA8E75E@microsoft.com...
>> >> >> > Hi,
>> >> >> > I have a computer that I built that won't boot after the latest
>> >> >> > Avast
>> >> >> > update. I updated Avast late Thurs (10/25/07) night and when it
>> >> >> > said
>> >> >> > that
>> >> >> > I
>> >> >> > needed to restart the computer, I pushed OK for it to restart and
>> >> >> > went
>> >> >> > to
>> >> >> > bed. I got up Friday morning and it was on a solid blue (not
>> >> >> > BSOD)
>> >> >> > screen.
>> >> >> > Now, it won't boot at all. I get thru the POST, and when it gets
>> >> >> > to
>> >> >> > launching
>> >> >> > the Windows x64 logo, it freezes on a black screen. No text.
>> >> >> >
>> >> >> > I also:
>> >> >> > - cannot get into any of the safe mode options, with one
>> >> >> > exception -
>> >> >> > when
>> >> >> > I
>> >> >> > launch into "Safe Mode" - I can see the lines "multidisk, rdisk,
>> >> >> > etc
>> >> >> > etc"
>> >> >> > coming across the screen and it stops on a line that ends in
>> >> >> > \windows\inf\biosinfo.inf - so it appears that this is where it
>> >> >> > freezes.
>> >> >> > - cannot boot to my original XP CDrom.
>> >> >> > - cannot get into the recovery console.
>> >> >> >
>> >> >> > Everything freezes to a black screen before I can get to any
>> >> >> > options
>> >> >> > that
>> >> >> > may allow me to work on this drive.
>> >> >> >
>> >> >> > I have slaved the drive to another x64 computer. I have full
>> >> >> > access
>> >> >> > to
>> >> >> > all
>> >> >> > of the data and files. Nothing is lost.
>> >> >> >
>> >> >> > So I'm thinking that when Avast did it's update on Thursday
>> >> >> > night,
>> >> >> > it
>> >> >> > corrupted one of the Windows boot files.
>> >> >> > Does anyone have any ideas?
>> >> >> > Do you need more information?
>> >> >> > Thanks in advance for any help you can offer.
>> >> >> > --Bill
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>