Windows 98 SE and UHCD.SYS

[shaz]

Recently my computer crashed and although I was able to restore the registry,
the usb ports no longer work. I get the following message: "Ntkern.vxd
device loaders for this device could not load the device driver (code2)."
the solution is suppose to be to download the UHCD.sys file. which i have
done. However when i ran the exe file i could not see where on my pc it had
been installed and the current uhcd.sys file has not been modified/deleted.
Also after restarting my pc the usb ports still do not work. any suggestions
as to where i am going wrong?

thanks

 

[Don Phillipson]

Re: Windows 98 SE and UHCD.SYS

"shaz" <shaz@discussions.microsoft.com> wrote in message
news:E7E874E0-5774-4143-85D8-4CC93926B61F@microsoft.com...
> Recently my computer crashed and although I was able to restore the
registry,
> the usb ports no longer work. I get the following message: "Ntkern.vxd
> device loaders for this device could not load the device driver (code2)."
> the solution is suppose to be to download the UHCD.sys file. which i have
> done. However when i ran the exe file i could not see where on my pc it
had
> been installed and the current uhcd.sys file has not been
modified/deleted.
> Also after restarting my pc the usb ports still do not work. any
suggestions
> as to where i am going wrong?

1. UHCD.SYS belongs by default in c:\windows\system32\drivers
2. Standard procedure for hardware difficulties is:
-- get updated drivers and store in a known place
-- via / Control Panel / System / Device Manager
simply remove the device(s); then
-- reboot and follow the prompts to restore drivers; if
the boot process fails to find "New Hardware" you can
use the applet / Control Panel / Add Hardware.
Did you try this? Repost here with results.

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)

 

[Emrys Davies]

Re: Windows 98 SE and UHCD.SYS

"shaz" <shaz@discussions.microsoft.com> wrote in message
news:E7E874E0-5774-4143-85D8-4CC93926B61F@microsoft.com...
> Recently my computer crashed and although I was able to restore the
registry,
> the usb ports no longer work. I get the following message:
"Ntkern.vxd
> device loaders for this device could not load the device driver
(code2)."
> the solution is suppose to be to download the UHCD.sys file. which i
have
> done. However when i ran the exe file i could not see where on my pc
it had
> been installed and the current uhcd.sys file has not been
modified/deleted.
> Also after restarting my pc the usb ports still do not work. any
suggestions
> as to where i am going wrong?
>
> thanks

Your file will be in C:\WINDOWS\SYSTEM32|DRIVERS

Regards,
Emrys Davies.

 

[Brian A.]

Re: Windows 98 SE and UHCD.SYS

"shaz" <shaz@discussions.microsoft.com> wrote in message
news:E7E874E0-5774-4143-85D8-4CC93926B61F@microsoft.com...
> Recently my computer crashed and although I was able to restore the registry,
> the usb ports no longer work. I get the following message: "Ntkern.vxd
> device loaders for this device could not load the device driver (code2)."
> the solution is suppose to be to download the UHCD.sys file. which i have
> done. However when i ran the exe file i could not see where on my pc it had
> been installed and the current uhcd.sys file has not been modified/deleted.
> Also after restarting my pc the usb ports still do not work. any suggestions
> as to where i am going wrong?
>
> thanks

Missing .vxd files:
Error Message: Cannot Find a Device File That May Be Needed to Run Windows
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q132008

Err Msg: Cannot Find a Device File That May Be Needed to Run...
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q166832

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375

 

[... et al.]

Re: Windows 98 SE and UHCD.SYS

shaz wrote:

> Recently my computer crashed and although I was able to restore the registry,
> the usb ports no longer work. I get the following message: "Ntkern.vxd
> device loaders for this device could not load the device driver (code2)."
> the solution is suppose to be to download the UHCD.sys file. which i have
> done. However when i ran the exe file i could not see where on my pc it had
> been installed and the current uhcd.sys file has not been modified/deleted.
> Also after restarting my pc the usb ports still do not work. any suggestions
> as to where i am going wrong?

msKB #240075 - USB Devices May Not Work in Win98SE
<http://support.microsoft.com/kb/240075/>
.... may apply. There's an updated [UHCD.sys] file.


--
Nah-ah. I'm staying out of this. ... Now, here's my opinion.

Please followup in the newsgroup.
E-mail address is invalid due to spam-control.

 

[shaz]

Re: Windows 98 SE and UHCD.SYS

I have tried removing the hardware but my pc hangs

"Don Phillipson" wrote:

> "shaz" <shaz@discussions.microsoft.com> wrote in message
> news:E7E874E0-5774-4143-85D8-4CC93926B61F@microsoft.com...
> > Recently my computer crashed and although I was able to restore the
> registry,
> > the usb ports no longer work. I get the following message: "Ntkern.vxd
> > device loaders for this device could not load the device driver (code2)."
> > the solution is suppose to be to download the UHCD.sys file. which i have
> > done. However when i ran the exe file i could not see where on my pc it
> had
> > been installed and the current uhcd.sys file has not been
> modified/deleted.
> > Also after restarting my pc the usb ports still do not work. any
> suggestions
> > as to where i am going wrong?
>
> 1. UHCD.SYS belongs by default in c:\windows\system32\drivers
> 2. Standard procedure for hardware difficulties is:
> -- get updated drivers and store in a known place
> -- via / Control Panel / System / Device Manager
> simply remove the device(s); then
> -- reboot and follow the prompts to restore drivers; if
> the boot process fails to find "New Hardware" you can
> use the applet / Control Panel / Add Hardware.
> Did you try this? Repost here with results.
>
> --
> Don Phillipson
> Carlsbad Springs
> (Ottawa, Canada)
>
>
>
>
>