P
Pearl
Guest
Is there a way that I can use Cut 'n Paste from my TS desktop screen to my
Active Desktop screen?
Active Desktop screen?
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
if a GPO is connected, could a setting cause this NOT to be available? If
so, where is the setting?
"Pearl" wrote:
> Is there a way that I can use Cut 'n Paste from my TS desktop screen to my
> Active Desktop screen?
if a GPO is connected, could a setting cause this NOT to be available? If
so, where is the setting?
"Pearl" wrote:
> Is there a way that I can use Cut 'n Paste from my TS desktop screen to my
> Active Desktop screen?
V
Vera Noest [MVP]
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
I believe that you have to allow drive redirection.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 06
dec 2007 in microsoft.public.windows.terminal_services:
> if a GPO is connected, could a setting cause this NOT to be
> available? If so, where is the setting?
>
> "Pearl" wrote:
>
>> Is there a way that I can use Cut 'n Paste from my TS desktop
>> screen to my Active Desktop screen?
I believe that you have to allow drive redirection.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 06
dec 2007 in microsoft.public.windows.terminal_services:
> if a GPO is connected, could a setting cause this NOT to be
> available? If so, where is the setting?
>
> "Pearl" wrote:
>
>> Is there a way that I can use Cut 'n Paste from my TS desktop
>> screen to my Active Desktop screen?
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
Is that in the Remote Desktop options under Local Resources?
"Vera Noest [MVP]" wrote:
> I believe that you have to allow drive redirection.
>
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 06
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > if a GPO is connected, could a setting cause this NOT to be
> > available? If so, where is the setting?
> >
> > "Pearl" wrote:
> >
> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> screen to my Active Desktop screen?
>
Is that in the Remote Desktop options under Local Resources?
"Vera Noest [MVP]" wrote:
> I believe that you have to allow drive redirection.
>
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 06
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > if a GPO is connected, could a setting cause this NOT to be
> > available? If so, where is the setting?
> >
> > "Pearl" wrote:
> >
> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> screen to my Active Desktop screen?
>
V
Vera Noest [MVP]
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
That's where you have to enable it on the client, yes. It also
needs to be allowed on the server, in Terminal Services
Configuration - rdp-tcp connection - properties - Client Settings
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
dec 2007 in microsoft.public.windows.terminal_services:
> Is that in the Remote Desktop options under Local Resources?
>
> "Vera Noest [MVP]" wrote:
>
>> I believe that you have to allow drive redirection.
>>
>> _________________________________________________________
>> Vera Noest
>> MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
06
>> dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > if a GPO is connected, could a setting cause this NOT to be
>> > available? If so, where is the setting?
>> >
>> > "Pearl" wrote:
>> >
>> >> Is there a way that I can use Cut 'n Paste from my TS desktop
>> >> screen to my Active Desktop screen?
That's where you have to enable it on the client, yes. It also
needs to be allowed on the server, in Terminal Services
Configuration - rdp-tcp connection - properties - Client Settings
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
dec 2007 in microsoft.public.windows.terminal_services:
> Is that in the Remote Desktop options under Local Resources?
>
> "Vera Noest [MVP]" wrote:
>
>> I believe that you have to allow drive redirection.
>>
>> _________________________________________________________
>> Vera Noest
>> MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
06
>> dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > if a GPO is connected, could a setting cause this NOT to be
>> > available? If so, where is the setting?
>> >
>> > "Pearl" wrote:
>> >
>> >> Is there a way that I can use Cut 'n Paste from my TS desktop
>> >> screen to my Active Desktop screen?
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
made the settings but did not change anything. Does it matter that the
Terminal Server is in Application Mode vs Remote Admin mode?
"Vera Noest [MVP]" wrote:
> That's where you have to enable it on the client, yes. It also
> needs to be allowed on the server, in Terminal Services
> Configuration - rdp-tcp connection - properties - Client Settings
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > Is that in the Remote Desktop options under Local Resources?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> I believe that you have to allow drive redirection.
> >>
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> 06
> >> dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > if a GPO is connected, could a setting cause this NOT to be
> >> > available? If so, where is the setting?
> >> >
> >> > "Pearl" wrote:
> >> >
> >> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> >> screen to my Active Desktop screen?
>
made the settings but did not change anything. Does it matter that the
Terminal Server is in Application Mode vs Remote Admin mode?
"Vera Noest [MVP]" wrote:
> That's where you have to enable it on the client, yes. It also
> needs to be allowed on the server, in Terminal Services
> Configuration - rdp-tcp connection - properties - Client Settings
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > Is that in the Remote Desktop options under Local Resources?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> I believe that you have to allow drive redirection.
> >>
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> 06
> >> dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > if a GPO is connected, could a setting cause this NOT to be
> >> > available? If so, where is the setting?
> >> >
> >> > "Pearl" wrote:
> >> >
> >> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> >> screen to my Active Desktop screen?
>
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
did not work. could it be that the Term Server is in Application Mode?
"Vera Noest [MVP]" wrote:
> That's where you have to enable it on the client, yes. It also
> needs to be allowed on the server, in Terminal Services
> Configuration - rdp-tcp connection - properties - Client Settings
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > Is that in the Remote Desktop options under Local Resources?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> I believe that you have to allow drive redirection.
> >>
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> 06
> >> dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > if a GPO is connected, could a setting cause this NOT to be
> >> > available? If so, where is the setting?
> >> >
> >> > "Pearl" wrote:
> >> >
> >> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> >> screen to my Active Desktop screen?
>
did not work. could it be that the Term Server is in Application Mode?
"Vera Noest [MVP]" wrote:
> That's where you have to enable it on the client, yes. It also
> needs to be allowed on the server, in Terminal Services
> Configuration - rdp-tcp connection - properties - Client Settings
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 07
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > Is that in the Remote Desktop options under Local Resources?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> I believe that you have to allow drive redirection.
> >>
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> 06
> >> dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > if a GPO is connected, could a setting cause this NOT to be
> >> > available? If so, where is the setting?
> >> >
> >> > "Pearl" wrote:
> >> >
> >> >> Is there a way that I can use Cut 'n Paste from my TS desktop
> >> >> screen to my Active Desktop screen?
>
V
Vera Noest [MVP]
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
No, that makes no difference.
Can you start Task Manager inside an rdp session and check if
rdpclip is amongst the running processes?
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
dec 2007 in microsoft.public.windows.terminal_services:
> did not work. could it be that the Term Server is in
> Application Mode?
>
> "Vera Noest [MVP]" wrote:
>
>> That's where you have to enable it on the client, yes. It also
>> needs to be allowed on the server, in Terminal Services
>> Configuration - rdp-tcp connection - properties - Client
>> Settings
>> _________________________________________________________ Vera
>> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
>> 07 dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > Is that in the Remote Desktop options under Local Resources?
>> >
>> > "Vera Noest [MVP]" wrote:
>> >
>> >> I believe that you have to allow drive redirection.
>> >>
>> >> _________________________________________________________
>> >> Vera Noest
>> >> MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> TS troubleshooting: http://ts.veranoest.net
>> >> ___ please respond in newsgroup, NOT by private email ___
>> >>
>> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
>> >> on
>> 06
>> >> dec 2007 in microsoft.public.windows.terminal_services:
>> >>
>> >> > if a GPO is connected, could a setting cause this NOT to
>> >> > be available? If so, where is the setting?
>> >> >
>> >> > "Pearl" wrote:
>> >> >
>> >> >> Is there a way that I can use Cut 'n Paste from my TS
>> >> >> desktop screen to my Active Desktop screen?
No, that makes no difference.
Can you start Task Manager inside an rdp session and check if
rdpclip is amongst the running processes?
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
dec 2007 in microsoft.public.windows.terminal_services:
> did not work. could it be that the Term Server is in
> Application Mode?
>
> "Vera Noest [MVP]" wrote:
>
>> That's where you have to enable it on the client, yes. It also
>> needs to be allowed on the server, in Terminal Services
>> Configuration - rdp-tcp connection - properties - Client
>> Settings
>> _________________________________________________________ Vera
>> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
>> 07 dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > Is that in the Remote Desktop options under Local Resources?
>> >
>> > "Vera Noest [MVP]" wrote:
>> >
>> >> I believe that you have to allow drive redirection.
>> >>
>> >> _________________________________________________________
>> >> Vera Noest
>> >> MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> TS troubleshooting: http://ts.veranoest.net
>> >> ___ please respond in newsgroup, NOT by private email ___
>> >>
>> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
>> >> on
>> 06
>> >> dec 2007 in microsoft.public.windows.terminal_services:
>> >>
>> >> > if a GPO is connected, could a setting cause this NOT to
>> >> > be available? If so, where is the setting?
>> >> >
>> >> > "Pearl" wrote:
>> >> >
>> >> >> Is there a way that I can use Cut 'n Paste from my TS
>> >> >> desktop screen to my Active Desktop screen?
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
yes. I see it
"Vera Noest [MVP]" wrote:
> No, that makes no difference.
> Can you start Task Manager inside an rdp session and check if
> rdpclip is amongst the running processes?
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > did not work. could it be that the Term Server is in
> > Application Mode?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> That's where you have to enable it on the client, yes. It also
> >> needs to be allowed on the server, in Terminal Services
> >> Configuration - rdp-tcp connection - properties - Client
> >> Settings
> >> _________________________________________________________ Vera
> >> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 07 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > Is that in the Remote Desktop options under Local Resources?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> I believe that you have to allow drive redirection.
> >> >>
> >> >> _________________________________________________________
> >> >> Vera Noest
> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on
> >> 06
> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >>
> >> >> > if a GPO is connected, could a setting cause this NOT to
> >> >> > be available? If so, where is the setting?
> >> >> >
> >> >> > "Pearl" wrote:
> >> >> >
> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> desktop screen to my Active Desktop screen?
>
yes. I see it
"Vera Noest [MVP]" wrote:
> No, that makes no difference.
> Can you start Task Manager inside an rdp session and check if
> rdpclip is amongst the running processes?
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > did not work. could it be that the Term Server is in
> > Application Mode?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> That's where you have to enable it on the client, yes. It also
> >> needs to be allowed on the server, in Terminal Services
> >> Configuration - rdp-tcp connection - properties - Client
> >> Settings
> >> _________________________________________________________ Vera
> >> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 07 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > Is that in the Remote Desktop options under Local Resources?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> I believe that you have to allow drive redirection.
> >> >>
> >> >> _________________________________________________________
> >> >> Vera Noest
> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on
> >> 06
> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >>
> >> >> > if a GPO is connected, could a setting cause this NOT to
> >> >> > be available? If so, where is the setting?
> >> >> >
> >> >> > "Pearl" wrote:
> >> >> >
> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> desktop screen to my Active Desktop screen?
>
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
yes, I see it. BTW...just informed that there is a Group Policy that is
assigned to the users of this Terminal Server. Is there anything in Group
Policy that may forbit Cut 'n Paste in Terminal Server?
"Vera Noest [MVP]" wrote:
> No, that makes no difference.
> Can you start Task Manager inside an rdp session and check if
> rdpclip is amongst the running processes?
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > did not work. could it be that the Term Server is in
> > Application Mode?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> That's where you have to enable it on the client, yes. It also
> >> needs to be allowed on the server, in Terminal Services
> >> Configuration - rdp-tcp connection - properties - Client
> >> Settings
> >> _________________________________________________________ Vera
> >> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 07 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > Is that in the Remote Desktop options under Local Resources?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> I believe that you have to allow drive redirection.
> >> >>
> >> >> _________________________________________________________
> >> >> Vera Noest
> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on
> >> 06
> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >>
> >> >> > if a GPO is connected, could a setting cause this NOT to
> >> >> > be available? If so, where is the setting?
> >> >> >
> >> >> > "Pearl" wrote:
> >> >> >
> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> desktop screen to my Active Desktop screen?
>
yes, I see it. BTW...just informed that there is a Group Policy that is
assigned to the users of this Terminal Server. Is there anything in Group
Policy that may forbit Cut 'n Paste in Terminal Server?
"Vera Noest [MVP]" wrote:
> No, that makes no difference.
> Can you start Task Manager inside an rdp session and check if
> rdpclip is amongst the running processes?
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 08
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > did not work. could it be that the Term Server is in
> > Application Mode?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> That's where you have to enable it on the client, yes. It also
> >> needs to be allowed on the server, in Terminal Services
> >> Configuration - rdp-tcp connection - properties - Client
> >> Settings
> >> _________________________________________________________ Vera
> >> Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 07 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > Is that in the Remote Desktop options under Local Resources?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> I believe that you have to allow drive redirection.
> >> >>
> >> >> _________________________________________________________
> >> >> Vera Noest
> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on
> >> 06
> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >>
> >> >> > if a GPO is connected, could a setting cause this NOT to
> >> >> > be available? If so, where is the setting?
> >> >> >
> >> >> > "Pearl" wrote:
> >> >> >
> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> desktop screen to my Active Desktop screen?
>
V
Vera Noest [MVP]
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
Yes, but then you would not have been able to enable it on the
server, settings which are configured in a GPO are grayed out in
Terminal Services Configuration.
But if you are not in charge of the configuration of the TS through
GPO, you should speak to the people who are. It's much faster to
ask them than to let us in the ng guess
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 09
dec 2007 in microsoft.public.windows.terminal_services:
> yes, I see it. BTW...just informed that there is a Group Policy
> that is assigned to the users of this Terminal Server. Is there
> anything in Group Policy that may forbit Cut 'n Paste in
> Terminal Server?
>
> "Vera Noest [MVP]" wrote:
>
>> No, that makes no difference.
>> Can you start Task Manager inside an rdp session and check if
>> rdpclip is amongst the running processes?
>> _________________________________________________________
>> Vera Noest
>> MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
>> 08 dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > did not work. could it be that the Term Server is in
>> > Application Mode?
>> >
>> > "Vera Noest [MVP]" wrote:
>> >
>> >> That's where you have to enable it on the client, yes. It
>> >> also needs to be allowed on the server, in Terminal Services
>> >> Configuration - rdp-tcp connection - properties - Client
>> >> Settings
>> >> _________________________________________________________
>> >> Vera Noest MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> TS troubleshooting: http://ts.veranoest.net
>> >> ___ please respond in newsgroup, NOT by private email ___
>> >>
>> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
>> >> on 07 dec 2007 in
>> >> microsoft.public.windows.terminal_services:
>> >>
>> >> > Is that in the Remote Desktop options under Local
>> >> > Resources?
>> >> >
>> >> > "Vera Noest [MVP]" wrote:
>> >> >
>> >> >> I believe that you have to allow drive redirection.
>> >> >>
>> >> >> _________________________________________________________
>> >> >> Vera Noest
>> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> >> TS troubleshooting: http://ts.veranoest.net
>> >> >> ___ please respond in newsgroup, NOT by private email ___
>> >> >>
>> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com>
>> >> >> wrote on
>> >> 06
>> >> >> dec 2007 in microsoft.public.windows.terminal_services:
>> >> >>
>> >> >> > if a GPO is connected, could a setting cause this NOT
>> >> >> > to be available? If so, where is the setting?
>> >> >> >
>> >> >> > "Pearl" wrote:
>> >> >> >
>> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
>> >> >> >> desktop screen to my Active Desktop screen?
Yes, but then you would not have been able to enable it on the
server, settings which are configured in a GPO are grayed out in
Terminal Services Configuration.
But if you are not in charge of the configuration of the TS through
GPO, you should speak to the people who are. It's much faster to
ask them than to let us in the ng guess
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
=?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 09
dec 2007 in microsoft.public.windows.terminal_services:
> yes, I see it. BTW...just informed that there is a Group Policy
> that is assigned to the users of this Terminal Server. Is there
> anything in Group Policy that may forbit Cut 'n Paste in
> Terminal Server?
>
> "Vera Noest [MVP]" wrote:
>
>> No, that makes no difference.
>> Can you start Task Manager inside an rdp session and check if
>> rdpclip is amongst the running processes?
>> _________________________________________________________
>> Vera Noest
>> MCSE, CCEA, Microsoft MVP - Terminal Server
>> TS troubleshooting: http://ts.veranoest.net
>> ___ please respond in newsgroup, NOT by private email ___
>>
>> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
>> 08 dec 2007 in microsoft.public.windows.terminal_services:
>>
>> > did not work. could it be that the Term Server is in
>> > Application Mode?
>> >
>> > "Vera Noest [MVP]" wrote:
>> >
>> >> That's where you have to enable it on the client, yes. It
>> >> also needs to be allowed on the server, in Terminal Services
>> >> Configuration - rdp-tcp connection - properties - Client
>> >> Settings
>> >> _________________________________________________________
>> >> Vera Noest MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> TS troubleshooting: http://ts.veranoest.net
>> >> ___ please respond in newsgroup, NOT by private email ___
>> >>
>> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
>> >> on 07 dec 2007 in
>> >> microsoft.public.windows.terminal_services:
>> >>
>> >> > Is that in the Remote Desktop options under Local
>> >> > Resources?
>> >> >
>> >> > "Vera Noest [MVP]" wrote:
>> >> >
>> >> >> I believe that you have to allow drive redirection.
>> >> >>
>> >> >> _________________________________________________________
>> >> >> Vera Noest
>> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
>> >> >> TS troubleshooting: http://ts.veranoest.net
>> >> >> ___ please respond in newsgroup, NOT by private email ___
>> >> >>
>> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com>
>> >> >> wrote on
>> >> 06
>> >> >> dec 2007 in microsoft.public.windows.terminal_services:
>> >> >>
>> >> >> > if a GPO is connected, could a setting cause this NOT
>> >> >> > to be available? If so, where is the setting?
>> >> >> >
>> >> >> > "Pearl" wrote:
>> >> >> >
>> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
>> >> >> >> desktop screen to my Active Desktop screen?
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
I checked with the person who setup the GPO and he states that he did not set
any conditions to disallow Cut'nPaste. So, I'm at a loss. I did, however,
ask to check to see if another Terminal Server also could not cut'npaste and
we discovered that it could do it. However, that server is not a DC nor is
it in Application mode.
"Vera Noest [MVP]" wrote:
> Yes, but then you would not have been able to enable it on the
> server, settings which are configured in a GPO are grayed out in
> Terminal Services Configuration.
> But if you are not in charge of the configuration of the TS through
> GPO, you should speak to the people who are. It's much faster to
> ask them than to let us in the ng guess
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 09
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > yes, I see it. BTW...just informed that there is a Group Policy
> > that is assigned to the users of this Terminal Server. Is there
> > anything in Group Policy that may forbit Cut 'n Paste in
> > Terminal Server?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> No, that makes no difference.
> >> Can you start Task Manager inside an rdp session and check if
> >> rdpclip is amongst the running processes?
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 08 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > did not work. could it be that the Term Server is in
> >> > Application Mode?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> That's where you have to enable it on the client, yes. It
> >> >> also needs to be allowed on the server, in Terminal Services
> >> >> Configuration - rdp-tcp connection - properties - Client
> >> >> Settings
> >> >> _________________________________________________________
> >> >> Vera Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on 07 dec 2007 in
> >> >> microsoft.public.windows.terminal_services:
> >> >>
> >> >> > Is that in the Remote Desktop options under Local
> >> >> > Resources?
> >> >> >
> >> >> > "Vera Noest [MVP]" wrote:
> >> >> >
> >> >> >> I believe that you have to allow drive redirection.
> >> >> >>
> >> >> >> _________________________________________________________
> >> >> >> Vera Noest
> >> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >> >>
> >> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com>
> >> >> >> wrote on
> >> >> 06
> >> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >> >>
> >> >> >> > if a GPO is connected, could a setting cause this NOT
> >> >> >> > to be available? If so, where is the setting?
> >> >> >> >
> >> >> >> > "Pearl" wrote:
> >> >> >> >
> >> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> >> desktop screen to my Active Desktop screen?
>
I checked with the person who setup the GPO and he states that he did not set
any conditions to disallow Cut'nPaste. So, I'm at a loss. I did, however,
ask to check to see if another Terminal Server also could not cut'npaste and
we discovered that it could do it. However, that server is not a DC nor is
it in Application mode.
"Vera Noest [MVP]" wrote:
> Yes, but then you would not have been able to enable it on the
> server, settings which are configured in a GPO are grayed out in
> Terminal Services Configuration.
> But if you are not in charge of the configuration of the TS through
> GPO, you should speak to the people who are. It's much faster to
> ask them than to let us in the ng guess
> _________________________________________________________
> Vera Noest
> MCSE, CCEA, Microsoft MVP - Terminal Server
> TS troubleshooting: http://ts.veranoest.net
> ___ please respond in newsgroup, NOT by private email ___
>
> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on 09
> dec 2007 in microsoft.public.windows.terminal_services:
>
> > yes, I see it. BTW...just informed that there is a Group Policy
> > that is assigned to the users of this Terminal Server. Is there
> > anything in Group Policy that may forbit Cut 'n Paste in
> > Terminal Server?
> >
> > "Vera Noest [MVP]" wrote:
> >
> >> No, that makes no difference.
> >> Can you start Task Manager inside an rdp session and check if
> >> rdpclip is amongst the running processes?
> >> _________________________________________________________
> >> Vera Noest
> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> TS troubleshooting: http://ts.veranoest.net
> >> ___ please respond in newsgroup, NOT by private email ___
> >>
> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote on
> >> 08 dec 2007 in microsoft.public.windows.terminal_services:
> >>
> >> > did not work. could it be that the Term Server is in
> >> > Application Mode?
> >> >
> >> > "Vera Noest [MVP]" wrote:
> >> >
> >> >> That's where you have to enable it on the client, yes. It
> >> >> also needs to be allowed on the server, in Terminal Services
> >> >> Configuration - rdp-tcp connection - properties - Client
> >> >> Settings
> >> >> _________________________________________________________
> >> >> Vera Noest MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >>
> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com> wrote
> >> >> on 07 dec 2007 in
> >> >> microsoft.public.windows.terminal_services:
> >> >>
> >> >> > Is that in the Remote Desktop options under Local
> >> >> > Resources?
> >> >> >
> >> >> > "Vera Noest [MVP]" wrote:
> >> >> >
> >> >> >> I believe that you have to allow drive redirection.
> >> >> >>
> >> >> >> _________________________________________________________
> >> >> >> Vera Noest
> >> >> >> MCSE, CCEA, Microsoft MVP - Terminal Server
> >> >> >> TS troubleshooting: http://ts.veranoest.net
> >> >> >> ___ please respond in newsgroup, NOT by private email ___
> >> >> >>
> >> >> >> =?Utf-8?B?UGVhcmw=?= <Pearl@discussions.microsoft.com>
> >> >> >> wrote on
> >> >> 06
> >> >> >> dec 2007 in microsoft.public.windows.terminal_services:
> >> >> >>
> >> >> >> > if a GPO is connected, could a setting cause this NOT
> >> >> >> > to be available? If so, where is the setting?
> >> >> >> >
> >> >> >> > "Pearl" wrote:
> >> >> >> >
> >> >> >> >> Is there a way that I can use Cut 'n Paste from my TS
> >> >> >> >> desktop screen to my Active Desktop screen?
>
P
Pearl
Guest
RE: Cut 'n Paste between TS desktop and Active Desktop
had a chance to see , first hand, what the problem is by over-the-shoulering
the user. She is taking a Word document and cutting several phrases from it
and then opens a notepad on her active desktop. She then tries to Paste the
entries into the notepad. It does not do it, however.
I've tried to reverse the process by doing the same thing from her active
desktop document and then open a notepad on the TS session and paste. Does
not work, either.
However, when I try this same procedure on "another" Terminal Server.... it
works fine.
As the administrator of the TS server, I also tried it.....failed, too.
Any ideas?
"Pearl" wrote:
> Is there a way that I can use Cut 'n Paste from my TS desktop screen to my
> Active Desktop screen?
had a chance to see , first hand, what the problem is by over-the-shoulering
the user. She is taking a Word document and cutting several phrases from it
and then opens a notepad on her active desktop. She then tries to Paste the
entries into the notepad. It does not do it, however.
I've tried to reverse the process by doing the same thing from her active
desktop document and then open a notepad on the TS session and paste. Does
not work, either.
However, when I try this same procedure on "another" Terminal Server.... it
works fine.
As the administrator of the TS server, I also tried it.....failed, too.
Any ideas?
"Pearl" wrote:
> Is there a way that I can use Cut 'n Paste from my TS desktop screen to my
> Active Desktop screen?