USB Mass Storage

  • Thread starter Thread starter Mumby33
  • Start date Start date
M

Mumby33

Guest
I have just built myself a new computer and installed XP Pro 64. I am running
2 Samsung HD501LJ HDD's in a Raid0 (Striping) configuration. These are brand
new drives and set as a bootable raid. They show on My Computer as a single
disk (C Drive). In order to transfer files from my old computer I purchased
an Akasa Integral USB Interface and installed a Maxtor 6 L200PO hard drive
from the old computer containing all my files to transfer. Although when
plugged in to a USB port the hardrive shows in the Device Manager and in the
System Information it does not show as a usable drive in My Computer and
therefore I cannot transfer the files from it. I would be grateful for any
ideas.

Many thanks

Mumby33
 
Re: USB Mass Storage

Go into disk manager and assign a drive letter to the disk.

--
Charlie.
http://msmvps.com/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"Mumby33" <Mumby33@discussions.microsoft.com> wrote in message
news:1D8D592F-5B92-4491-8627-F5FC78020454@microsoft.com...
>I have just built myself a new computer and installed XP Pro 64. I am
>running
> 2 Samsung HD501LJ HDD's in a Raid0 (Striping) configuration. These are
> brand
> new drives and set as a bootable raid. They show on My Computer as a
> single
> disk (C Drive). In order to transfer files from my old computer I
> purchased
> an Akasa Integral USB Interface and installed a Maxtor 6 L200PO hard drive
> from the old computer containing all my files to transfer. Although when
> plugged in to a USB port the hardrive shows in the Device Manager and in
> the
> System Information it does not show as a usable drive in My Computer and
> therefore I cannot transfer the files from it. I would be grateful for any
> ideas.
>
> Many thanks
>
> Mumby33
 
Re: USB Mass Storage

Charlie,

So simple and yet so helpful. Many thanks for this which worked spot on.

"Charlie Russel - MVP" wrote:

> Go into disk manager and assign a drive letter to the disk.
>
> --
> Charlie.
> http://msmvps.com/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
>
> "Mumby33" <Mumby33@discussions.microsoft.com> wrote in message
> news:1D8D592F-5B92-4491-8627-F5FC78020454@microsoft.com...
> >I have just built myself a new computer and installed XP Pro 64. I am
> >running
> > 2 Samsung HD501LJ HDD's in a Raid0 (Striping) configuration. These are
> > brand
> > new drives and set as a bootable raid. They show on My Computer as a
> > single
> > disk (C Drive). In order to transfer files from my old computer I
> > purchased
> > an Akasa Integral USB Interface and installed a Maxtor 6 L200PO hard drive
> > from the old computer containing all my files to transfer. Although when
> > plugged in to a USB port the hardrive shows in the Device Manager and in
> > the
> > System Information it does not show as a usable drive in My Computer and
> > therefore I cannot transfer the files from it. I would be grateful for any
> > ideas.
> >
> > Many thanks
> >
> > Mumby33
>
 
Back
Top