Windows 2003 ASR returns "capacity of system disk insufficient".

  • Thread starter Thread starter connor_a@hotmail.com
  • Start date Start date
C

connor_a@hotmail.com

Guest
Hi everyone,

Hoping to get a few tips with this scenario!

I have a domain controller running windows 2003 with the following
disks:

Disk1 72Gb with partitions:
C system/boot 20Gb
D dfs shares 40Gb

Disk2 200Gb with partitions:
E data 200Gb

I run the ASR NTbackup wizard and this created a 6Gb .bkf file and ASR
FDD.

I power on a HP DL320 with 2 x 72Gb disks and initialise this as a
RAID 0 array (150Gb)
Boot with the Win2003 CD, press F2 and insert the ASR FDD.

A few moments later I get the message:

"The capacity of the current system disk drive is
insufficient, and cannot be used to recover the
partitions on the original system disk.

The replacement hard disk drives must be at least as large
as the disks present on the original system"

Why is the RAID 0 array insufficient when it is 150Gb???

Thanks.
 
Back
Top