XP Sp2 Machine logging on to wrong DC

  • Thread starter Thread starter JasonCat
  • Start date Start date
J

JasonCat

Guest
I have an XP sp2 machine that takes about 20 minutes to log on. I have a
multi site enviornment. When this pc logs on, it is logging in to our DC in
Canada, instead of the DC here in the main office. This is why I am assuming
the logon takes so long, because its going over a slow 768k WAN link. This
is the only PC with this problem.

When I boot the pc in safe mode with network support, it logs on fine, and
to the correct DC.

How can I make it use the correct DC for logging on?

DNS is correct, and it is getting the correct ip address.
Removing the pc from the domain, and rejoining did not help.
 
Re: XP Sp2 Machine logging on to wrong DC

Some time ago, we had the same issue.
The solution was to properly configure the sites and subnets in active
directory sites and services.

JasonCat wrote:
> I have an XP sp2 machine that takes about 20 minutes to log on. I have a
> multi site enviornment. When this pc logs on, it is logging in to our DC in
> Canada, instead of the DC here in the main office. This is why I am assuming
> the logon takes so long, because its going over a slow 768k WAN link. This
> is the only PC with this problem.
>
> When I boot the pc in safe mode with network support, it logs on fine, and
> to the correct DC.
>
> How can I make it use the correct DC for logging on?
>
> DNS is correct, and it is getting the correct ip address.
> Removing the pc from the domain, and rejoining did not help.
 
Re: XP Sp2 Machine logging on to wrong DC

I am pretty certain that the subnets in sites and services are configured
correctly. The current network setup has been in place for several years now
with little to no changes at all. Besides, if that was the case, wouldn't
there be more than 1 out of 300 PCs having the issue? I do appreciate the
comment, and if you have any more, send them this way. Thanks.

"Theo Verweij" wrote:

> Some time ago, we had the same issue.
> The solution was to properly configure the sites and subnets in active
> directory sites and services.
>
> JasonCat wrote:
> > I have an XP sp2 machine that takes about 20 minutes to log on. I have a
> > multi site enviornment. When this pc logs on, it is logging in to our DC in
> > Canada, instead of the DC here in the main office. This is why I am assuming
> > the logon takes so long, because its going over a slow 768k WAN link. This
> > is the only PC with this problem.
> >
> > When I boot the pc in safe mode with network support, it logs on fine, and
> > to the correct DC.
> >
> > How can I make it use the correct DC for logging on?
> >
> > DNS is correct, and it is getting the correct ip address.
> > Removing the pc from the domain, and rejoining did not help.

>
 
Re: XP Sp2 Machine logging on to wrong DC

Remote chance: Are your servers 2003, but not at SP1?

Maybe this?

http://support.microsoft.com/kb/831201

HTH

Harry



JasonCat <JasonCat@discussions.microsoft.com> wrote:

>I have an XP sp2 machine that takes about 20 minutes to log on. I have a
>multi site enviornment. When this pc logs on, it is logging in to our DC in
>Canada, instead of the DC here in the main office. This is why I am assuming
>the logon takes so long, because its going over a slow 768k WAN link. This
>is the only PC with this problem.
>
>When I boot the pc in safe mode with network support, it logs on fine, and
>to the correct DC.
>
>How can I make it use the correct DC for logging on?
>
>DNS is correct, and it is getting the correct ip address.
>Removing the pc from the domain, and rejoining did not help.



Ha®®y

HarryKrishna.nospam@online.ie
 
Re: XP Sp2 Machine logging on to wrong DC

some servers are 2000 SP4, and other are 2003 SP1. We are not using DFS.
Fortunatly another problem solved this one. I went to do some more trouble
shooting the other day, and the PC would not boot. Needless to say, that PC
was rebuilt. No problem since then. It was the last solutions I was looking
for, but it gave me no choice. Thanks for all your efforts.

"harrykrishna.nospam@online.ie" wrote:

> Remote chance: Are your servers 2003, but not at SP1?
>
> Maybe this?
>
> http://support.microsoft.com/kb/831201
>
> HTH
>
> Harry
>
>
>
> JasonCat <JasonCat@discussions.microsoft.com> wrote:
>
> >I have an XP sp2 machine that takes about 20 minutes to log on. I have a
> >multi site enviornment. When this pc logs on, it is logging in to our DC in
> >Canada, instead of the DC here in the main office. This is why I am assuming
> >the logon takes so long, because its going over a slow 768k WAN link. This
> >is the only PC with this problem.
> >
> >When I boot the pc in safe mode with network support, it logs on fine, and
> >to the correct DC.
> >
> >How can I make it use the correct DC for logging on?
> >
> >DNS is correct, and it is getting the correct ip address.
> >Removing the pc from the domain, and rejoining did not help.

>
>
> Ha®®y
>
> HarryKrishna.nospam@online.ie
>
 
Back
Top