H
help
Guest
Hello:
mystem is winxp ,ntfs.
I start my computer today but cannot start even in safe mode or last
known good configuration,then I use my ghost image want to restore to it
,but the target drive is not accessible,it show the byte information but
in gray ,that mean cannot click into the drive,then now I use pebuider
to connect the internet,in my computer c drive become unaccessible ,file
sytem become,raw,and data is 0 byte.what can I do now,my image is quite
new ,therefore I need not recover data from the raw drive by other
recovery file software ,only want to restore the image to it by the gho
image.what can I do ,I have acronis drive director,and the c drive show
it here,when exploring it files also intact,then does I need to format
the partition ,if I format it ,will the ghost 2003 can see and access
the drive again?I am imexperience like thise situation,and want someone
can help me dicide on how to do,I have this kind of raw system
before,but not on drive c,why that happen?this partition is the only one
have problem ,drive e which is the other half of this harddisk have no
problem accessing files.what the problem,I need someone help me,thanks
in advance
what can I do to make the window xp boot again without needing to
restore from ghost image,or if the only method is restore ,how can I
make the c partition appear as normal and canbe accessed through the
browse for target drive dialog?
I am not dare to format partition c,because if it has create more
problem and make restore ghost image more complex,I am worrisome!
I also have tried the partition table doctor ,it show my c drive and
when browse root the files/folder shown up intact.use the rebuild MBR
and also fixboot,reboot computer still the black screen of unbootable
and have other choice boot from safe mode.
but it also prompt me to fix the error,something like:error:the total
sectors of the partition 2 on harddisk 1 is 93648055.the right total
sectors is 93948057.Do you want to correct the error?(it is the e drive
that is accessible,and it share the same harddisk with c drive)when I
click ok to fix this error,I am fear because the partition e become
dissapear in the partition doctor table,only left c drive shown up in
the 1 disk,therefore I do not save the changes after this operation
because I fear all the data in disk e will be formatted, erased!not know
what the problem,but when using ghost application,the c drive can be
browse normally when browse for the source image to restore from,but
cannot accessed only when b rowse for the target partition to restore
to.strange
!!!
I have enter recovery console using window cd,type "diskpart /",then
the drive c shown as cannot recognised partition.
then type "chkdsk"it show checking at first ,but after 25% completion
,it hangs without any word indication,therefore I reboot computer esc
the black hanging screen.
the partition even cannot be recognized by window cd
mystem is winxp ,ntfs.
I start my computer today but cannot start even in safe mode or last
known good configuration,then I use my ghost image want to restore to it
,but the target drive is not accessible,it show the byte information but
in gray ,that mean cannot click into the drive,then now I use pebuider
to connect the internet,in my computer c drive become unaccessible ,file
sytem become,raw,and data is 0 byte.what can I do now,my image is quite
new ,therefore I need not recover data from the raw drive by other
recovery file software ,only want to restore the image to it by the gho
image.what can I do ,I have acronis drive director,and the c drive show
it here,when exploring it files also intact,then does I need to format
the partition ,if I format it ,will the ghost 2003 can see and access
the drive again?I am imexperience like thise situation,and want someone
can help me dicide on how to do,I have this kind of raw system
before,but not on drive c,why that happen?this partition is the only one
have problem ,drive e which is the other half of this harddisk have no
problem accessing files.what the problem,I need someone help me,thanks
in advance
what can I do to make the window xp boot again without needing to
restore from ghost image,or if the only method is restore ,how can I
make the c partition appear as normal and canbe accessed through the
browse for target drive dialog?
I am not dare to format partition c,because if it has create more
problem and make restore ghost image more complex,I am worrisome!
I also have tried the partition table doctor ,it show my c drive and
when browse root the files/folder shown up intact.use the rebuild MBR
and also fixboot,reboot computer still the black screen of unbootable
and have other choice boot from safe mode.
but it also prompt me to fix the error,something like:error:the total
sectors of the partition 2 on harddisk 1 is 93648055.the right total
sectors is 93948057.Do you want to correct the error?(it is the e drive
that is accessible,and it share the same harddisk with c drive)when I
click ok to fix this error,I am fear because the partition e become
dissapear in the partition doctor table,only left c drive shown up in
the 1 disk,therefore I do not save the changes after this operation
because I fear all the data in disk e will be formatted, erased!not know
what the problem,but when using ghost application,the c drive can be
browse normally when browse for the source image to restore from,but
cannot accessed only when b rowse for the target partition to restore
to.strange
!!!
I have enter recovery console using window cd,type "diskpart /",then
the drive c shown as cannot recognised partition.
then type "chkdsk"it show checking at first ,but after 25% completion
,it hangs without any word indication,therefore I reboot computer esc
the black hanging screen.
the partition even cannot be recognized by window cd