J
jak163@gmail.com
Guest
Hi. I installed a Nvidia GeForce 6200 256MB DDR Low Profile Dual DVI
& VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.
Computer is running Windows 98SE on an AMD-700 K6-III processor with
512MB of RAM.
The system hangs when I shut down with a blinking cursor. If I try to
restart in MS-DOS mode, it gives me a DOS screen with Windows
Protection Error, You Need to Restart Your Computer, and any key will
shut it down, although the state when I restart will not remember any
changes.
Gateway will not give tech support as this is third party (although
they recommended checking the power supply, but it's 350W so it's more
than they specified). Jaton, who sold me the card, suggested
upgrading the BIOS, which I did to no avail.
Any suggestions would be welcome.
& VGA (PCI) card on a Kadoka motherboard BIOS upgraded to 0AASNP06.
Computer is running Windows 98SE on an AMD-700 K6-III processor with
512MB of RAM.
The system hangs when I shut down with a blinking cursor. If I try to
restart in MS-DOS mode, it gives me a DOS screen with Windows
Protection Error, You Need to Restart Your Computer, and any key will
shut it down, although the state when I restart will not remember any
changes.
Gateway will not give tech support as this is third party (although
they recommended checking the power supply, but it's 350W so it's more
than they specified). Jaton, who sold me the card, suggested
upgrading the BIOS, which I did to no avail.
Any suggestions would be welcome.