2 subnets 1 server

  • Thread starter Thread starter amb
  • Start date Start date
A

amb

Guest
We have the terminalserver connected to 2 different subnets.
10.3.0.0 and 100.10.0.0, the server has as IP's 10.3.0.51 and 100.10.10.1,
we can rmake a rdp session to the 10.3.0.51 side, but not to the 100.10.10.1
side. The server was first configured on the 10.3.0.51 side, the networkcart
for the other side was installed later. What do we wrong. We did shut down
the firewall on bothsides, we're working on a windows2003 server.
 
RE: 2 subnets 1 server

tanx all for reading this. it's allready resolved..was configured for only
one card.. :-)

"amb" wrote:

> We have the terminalserver connected to 2 different subnets.
> 10.3.0.0 and 100.10.0.0, the server has as IP's 10.3.0.51 and 100.10.10.1,
> we can rmake a rdp session to the 10.3.0.51 side, but not to the 100.10.10.1
> side. The server was first configured on the 10.3.0.51 side, the networkcart
> for the other side was installed later. What do we wrong. We did shut down
> the firewall on bothsides, we're working on a windows2003 server.
 
RE: 2 subnets 1 server

This second NIC really was unneccessary if you have routers in place that
connect the two subnets.

--
Patrick C. Rouse
Microsoft MVP - Terminal Server
SE, West Coast USA & Canada
Quest Software, Provision Networks Division
Virtual Client Solutions
http://www.provisionnetworks.com


"amb" wrote:

> tanx all for reading this. it's allready resolved..was configured for only
> one card.. :-)
>
> "amb" wrote:
>
> > We have the terminalserver connected to 2 different subnets.
> > 10.3.0.0 and 100.10.0.0, the server has as IP's 10.3.0.51 and 100.10.10.1,
> > we can rmake a rdp session to the 10.3.0.51 side, but not to the 100.10.10.1
> > side. The server was first configured on the 10.3.0.51 side, the networkcart
> > for the other side was installed later. What do we wrong. We did shut down
> > the firewall on bothsides, we're working on a windows2003 server.
 
Back
Top