Windows Xp64 can't copy all files from unix???

  • Thread starter Thread starter Christophe 83
  • Start date Start date
C

Christophe 83

Guest
Hi,
I have bought 2 small nas (Lacie and qnap), I have problem for copy full directories from nas.

1) I can copy any files from Pc to nas
2) I can read files with pc on vista on Windows Xp32
3) With Xp 64 (4 different computers tried) copy stop. I think that this pronlem is rescent because 1 month ago thyere are no problem, and with a new computer I haven't problem before windows update.

Any idea?

Thank
 
RE: Windows Xp64 can't copy all files from unix???

Christophe,
Let's try to clarify item #3 in order to help you better.
- What is exactly "With XP 64 copy stop"?
- What was your setup 1 month ago that you had no problems?
- What does it mean "with a new computer I haven't problem before windows
update"?
Try to make your answers as extensive as possible.

I had a similar (but not equal) problem with a NAS Conceptronic disk that
was solved after upgrading it to the latest firmware.
In my case it was a compatibility issue with Vista that the new firmware
worked out.

Carlos

"Christophe 83" wrote:

> Hi,
> I have bought 2 small nas (Lacie and qnap), I have problem for copy full directories from nas.
>
> 1) I can copy any files from Pc to nas
> 2) I can read files with pc on vista on Windows Xp32
> 3) With Xp 64 (4 different computers tried) copy stop. I think that this pronlem is rescent because 1 month ago thyere are no problem, and with a new computer I haven't problem before windows update.
>
> Any idea?
>
> Thank
>
 
Re: Windows Xp64 can't copy all files from unix???

good thoughts. Might also want to look at TCP Offload, etc, settings in the
registry if this is after SP2 install. SP2 enabled a lot of "advanced
features" on NICs without warning and it will break things. Especially on
NICs such as those based on Broadcom chips, but others as well.

--
Charlie.
http://msmvps.com/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"Carlos" <Carlos@discussions.microsoft.com> wrote in message
news:2B6FFC6C-0B0C-4E7F-868E-02AAADE6FA33@microsoft.com...
> Christophe,
> Let's try to clarify item #3 in order to help you better.
> - What is exactly "With XP 64 copy stop"?
> - What was your setup 1 month ago that you had no problems?
> - What does it mean "with a new computer I haven't problem before windows
> update"?
> Try to make your answers as extensive as possible.
>
> I had a similar (but not equal) problem with a NAS Conceptronic disk that
> was solved after upgrading it to the latest firmware.
> In my case it was a compatibility issue with Vista that the new firmware
> worked out.
>
> Carlos
>
> "Christophe 83" wrote:
>
>> Hi,
>> I have bought 2 small nas (Lacie and qnap), I have problem for copy full
>> directories from nas.
>>
>> 1) I can copy any files from Pc to nas
>> 2) I can read files with pc on vista on Windows Xp32
>> 3) With Xp 64 (4 different computers tried) copy stop. I think that this
>> pronlem is rescent because 1 month ago thyere are no problem, and with a
>> new computer I haven't problem before windows update.
>>
>> Any idea?
>>
>> Thank
>>
 
Re: Windows Xp64 can't copy all files from unix???

When I try to copy folders, it starts correctly, then after progress bar is
frozen.
Computer doesn't crash but the progress bar for copy is stopped
I don't understand because if I copy all files one by one I haven't any
problem.
The problem appears on all windows XP64computers of our company
I supposed it is linked with a last windowsXP64 update.
I received a newcomputer, on which the problem doesn't appear immediatly...
but after windowsXP64 update it begins

When trying to copy, with the Windows XP64 explorer,
I have also the feeling that which special files names, containing some
special characters,
system is able to make the list of files, but is not able to copy them
after.
So I assume a compatibilty problem between Unix file name system(used by
NAS) and XP64 file name system.

Best regards

Christophe VIALA

"Carlos" <Carlos@discussions.microsoft.com> a écrit dans le message de news:
2B6FFC6C-0B0C-4E7F-868E-02AAADE6FA33@microsoft.com...
> Christophe,
> Let's try to clarify item #3 in order to help you better.
> - What is exactly "With XP 64 copy stop"?
> - What was your setup 1 month ago that you had no problems?
> - What does it mean "with a new computer I haven't problem before windows
> update"?
> Try to make your answers as extensive as possible.
>
> I had a similar (but not equal) problem with a NAS Conceptronic disk that
> was solved after upgrading it to the latest firmware.
> In my case it was a compatibility issue with Vista that the new firmware
> worked out.
>
> Carlos
>
> "Christophe 83" wrote:
>
>> Hi,
>> I have bought 2 small nas (Lacie and qnap), I have problem for copy full
>> directories from nas.
>>
>> 1) I can copy any files from Pc to nas
>> 2) I can read files with pc on vista on Windows Xp32
>> 3) With Xp 64 (4 different computers tried) copy stop. I think that this
>> pronlem is rescent because 1 month ago thyere are no problem, and with a
>> new computer I haven't problem before windows update.
>>
>> Any idea?
>>
>> Thank
>>
 
Re: Windows Xp64 can't copy all files from unix???

Hi,
Charlie's comments might be in the right direction.
You may also want to take a look here:
http://mcpmag.com/forums/forum_posts.asp?tid=3736&pn=1&Tpn=2
Carlos

"Christophe 83" wrote:

> When I try to copy folders, it starts correctly, then after progress bar is
> frozen.
> Computer doesn't crash but the progress bar for copy is stopped
> I don't understand because if I copy all files one by one I haven't any
> problem.
> The problem appears on all windows XP64computers of our company
> I supposed it is linked with a last windowsXP64 update.
> I received a newcomputer, on which the problem doesn't appear immediatly...
> but after windowsXP64 update it begins
>
> When trying to copy, with the Windows XP64 explorer,
> I have also the feeling that which special files names, containing some
> special characters,
> system is able to make the list of files, but is not able to copy them
> after.
> So I assume a compatibilty problem between Unix file name system(used by
> NAS) and XP64 file name system.
>
> Best regards
>
> Christophe VIALA
>
> "Carlos" <Carlos@discussions.microsoft.com> a écrit dans le message de news:
> 2B6FFC6C-0B0C-4E7F-868E-02AAADE6FA33@microsoft.com...
> > Christophe,
> > Let's try to clarify item #3 in order to help you better.
> > - What is exactly "With XP 64 copy stop"?
> > - What was your setup 1 month ago that you had no problems?
> > - What does it mean "with a new computer I haven't problem before windows
> > update"?
> > Try to make your answers as extensive as possible.
> >
> > I had a similar (but not equal) problem with a NAS Conceptronic disk that
> > was solved after upgrading it to the latest firmware.
> > In my case it was a compatibility issue with Vista that the new firmware
> > worked out.
> >
> > Carlos
> >
> > "Christophe 83" wrote:
> >
> >> Hi,
> >> I have bought 2 small nas (Lacie and qnap), I have problem for copy full
> >> directories from nas.
> >>
> >> 1) I can copy any files from Pc to nas
> >> 2) I can read files with pc on vista on Windows Xp32
> >> 3) With Xp 64 (4 different computers tried) copy stop. I think that this
> >> pronlem is rescent because 1 month ago thyere are no problem, and with a
> >> new computer I haven't problem before windows update.
> >>
> >> Any idea?
> >>
> >> Thank
> >>
>
>
>
 
Back
Top