Re: PCMCIA card reader with SRAM card
Getting SRAM to work with Windows 98 can be difficult. This site has a good
description of the process - it isn't simple, however.
http://www.synchrotech.com/support/faq-sram-pcmcia-pc_cards.html
(about halfway down).
The MS link from that page no longer works but this may be helpful:
http://support.microsoft.com/kb/142945/en-us
Problems Installing SRAM or Flash Memory Cards in Windows 95
When you insert a PCMCIA SRAM or Flash memory card into a Windows 95- based
computer that has been configured to use protected-mode PCMCIA card drivers,
there may be no drive letter in My Computer or Windows Explorer associated
with the PCMCIA card. This can occur even though the card seems to be
recognized properly and the appropriate driver is installed.
The advice there (for W95) is exactly opposite to the advice on the previous
page (for W98). However, here is an example of driver installation using
the W95 technique in W98:
http://support.microsoft.com/kb/264387/en-us
--
Jeff Richards
MS MVP (Windows - Shell/User)
"Old Guy" <defenton@mts.net> wrote in message
news:8862485e-4a77-4263-8a08-1812ad5a0e31@h25g2000hsf.googlegroups.com...
> On Mar 6, 11:18 pm, Franc Zabkar <fzab...@iinternode.on.net> wrote:
>> On Thu, 6 Mar 2008 20:04:37 -0800 (PST), Old Guy <defen...@mts.net>
>> put finger to keyboard and composed:
>>
>> >I just installed a PCI adapter to use PCMCIA SRAM cards in my win98
>> >desktop computer. Windows recognized both the adapter and the memory
>> >card and installed new drivers. I rebooted. Control panel->System
>> >reports the devices are there and working properly. The problem is
>> >that the drive has not been assigned a drive letter and doesn't show
>> >up in My Computer or Windows File Manager so I can't transfer files to
>> >or from the card. There is no icon for it that I can see other than
>> >one in the Task Bar that allows you to stop the drive for card
>> >removal. It works. What am I missing?
>>
>> Four suggestions:
> Thanks very much. Sorry for taking so long to respond.
>>
>> (1) Use TweakUI to check whether the higher drive letters are hidden.
> I didn't have this program. I downloaded it and ran it. I saw no
> options that would be useful
>>
>> (2) Try executing "fdisk /status" in a DOS window.
> Only my non partitioned (primaryonly) C drive showed up.
>>
>> (3) Try "vol d:", where "d:" can be D:, E:, F:, etc.
> I tried this for every letter of the alphabet beyond D, my CD-ROM. All
> were invalid.
>>
>> (4) Type the following line at the command prompt (it looks like two
>> lines but is actually one long line). If required, respond with "Fail"
>> to "Abort, Retry, Fail?". This should find all the existing drive
>> letters, whether visible or hidden.
>>
>> command /c for %%i in (c d e f g h i j k l m n o p q r s t u v w x y
>> z) do vol %%i: | find /i "volume"
> I tried this a few times and kept getting "invalid parameter ( list of
> letters)"
>>
>> - Franc Zabkar
>> --
>> Please remove one 'i' from my address when replying by email.
> Device Manager reports the following are all installed and working
> properly:
> Memory Technology Drivers
> SRAM Memory Card (series 1)
> PCMCIA Socket
> PCMCIA Card Services
> Ricoh RL5C475 Card Bus Controller
>
> The card is listed in Hardware in System Tools under Miscellaneous,
> not in Storage Devices.
>
>