Memory recognition

  • Thread starter Thread starter jamf
  • Start date Start date
J

jamf

Guest
I have installed 6GB of RAM in my workstation, the BIOS showed the 6 GB, but
after boot my computer, xp 64 bits only was using 3.5 GB. What is happening?
If I were using a 32 bits systems I would understand that, but using a xp 64
bits in a hp workstation xw4300 with Intel processor with technology EM64T
no. I will appreciate any comment. Thank you
 
Re: Memory recognition

Most likely, you need to apply a BIOS setting to re-map the memory - go
through everything and read all the options and you'll find it.

If not, you'll need a BIOS update!!!


Tony. . .


"jamf" <jamf@discussions.microsoft.com> wrote in message
news:9675BC3D-ECAA-4291-92D1-0E56D2829005@microsoft.com...
> I have installed 6GB of RAM in my workstation, the BIOS showed the 6 GB,
but
> after boot my computer, xp 64 bits only was using 3.5 GB. What is
happening?
> If I were using a 32 bits systems I would understand that, but using a xp
64
> bits in a hp workstation xw4300 with Intel processor with technology EM64T
> no. I will appreciate any comment. Thank you
 
Back
Top