Re: BIOS update
I'm glad it works for you. I did exactly as you describe, with the bios on a
local drive. I've done the same thing without a problem on various other
systems over the years. In this case I had to return my motherboard because
only the first part of the update succeeded- it erased the existing bios
code. When it failed to write the new bios code, the motherboard wouldn't
even post. It would beep, the disk and fans would spin up, and after a few
seconds it would all stop, repeating this pattern every few seconds. Very
sad experience with a newly-assembled system.
This is on an Asus motherboard with Intel chipset? When I called Asus tech
support after hosing my motherboard, they told me NEVER to use the Asus
Windows bios update utility. I asked why it was available on the Asus
website and they said they had requested that it be removed, but not gotten
a response from the Asus decision makers. Asus documents a bios-recovery
procedure, which did not do anything for me. Searching the web I found
plenty of similar reports.
Given the fact that IF it fails it leaves the motherboard useless, it seems
simple enough to me to use the update utility that's reached from within the
bios setup and load the new bios from a usb flash drive.
"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
news:B5848DF6-3762-499F-817D-AA6D4FC7A295@microsoft.com...
> That's simply not true. I use the windows update utility regularly in
> 64bit Windows. The one caveat is that I suggest downloading the BIOS to a
> local drive first, then flashing from that.
>
> --
> Charlie.
> http://msmvps.com/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
>
> "Paul Shapiro" <paul@hideme.broadwayData.com> wrote in message
> news:eSA8oHGhIHA.3352@TK2MSFTNGP04.phx.gbl...
>> BUT- If it's an Asus motherboard, DO NOT USE the windows-based bios
>> update utility. Most of the time it fails, leaving the motherboard
>> unusable. RMA is the only fix. Apparently the success rate is close to
>> zero when running a 64-bit os.
>>
>> If you can't find the Memory Remap option that John mentions below in
>> your current bios, you might want to verify it's included in the latest
>> bios before you bother with the bios update. That's the setting you need
>> to change for your system to see all the installed memory.
>>
>> Check to see if your BIOS has an option to update from a USB flash disk.
>> Last resort, you could buy a USB floppy and use that.
>>
>> "John Barnes" <jbarnes@email.net> wrote in message
>> news:u45B26EhIHA.4396@TK2MSFTNGP04.phx.gbl...
>>> There is a 'remap' in the BIOS that should help you. You can see if it
>>> is already there and set it. You may be able to update your BIOS
>>> online, from the hard drive etc. Usually the MOBO mfg tells you the
>>> procedure and devices you can do it from where the downloads are
>>> available.
>>>
>>> "Loki1975" <Loki1975@discussions.microsoft.com> wrote in message
>>> news:8C489D87-A59A-45DB-81F0-BD45B32F4986@microsoft.com...
>>>>I have recently installed the 64 bit version of vista home premium.
>>>>After I
>>>> installed 4GB RAM (compatible with the motherboard) the BIOS ony
>>>> registers
>>>> 3.2GB so have decided to try an update the BIOS but not having a FDD. I
>>>> have
>>>> tried to make a bootable CD with no luck. Any ideas?