J
Jonathan
Guest
I'm trying to install Vista SP1 on my HP 8710w laptop with Vista Business
32-bit, and it gets all the way to stage 3 where it says it failed and
reverts the installation. When I get back into Windows I get the following
message from the SP1 installer:
Windows Vista Service Pack 1 was not installed on your computer.
Error code: 0x800F0826.
I have run CheckSUR, and the System File Checker, but they did not help.
After checking the CBS.log file I found the following error that appears to
be preventing SP1 from installing:
2008-03-21 02:31:16, Info CSI 00000095 Begin executing
advanced installer phase 38 (0x00000026) index 52 (0x00000034) (sequence 91)
Old component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
Install mode: install
Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
Installer name: [15]"Generic Command"
2008-03-21 02:31:16, Info CSI 00000096 Calling generic
command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
CmdLine: [43]""C:\Windows\bfsvc.exe" C:\Windows\boot /mui"
2008-03-21 02:31:16, Error CSI 00000097 (F) Done with
generic command 3; CreateProcess returned 0, CPAW returned S_OK
Process exit code 15299 (0x00003bc3) resulted in success? FALSE
Process output: [l:0 ][gle=0x80004005]
2008-03-21 02:31:16, Info CSI
00000098@2008/3/21:07:31:16.928 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources,
Version = 6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;14997
2008-03-21 02:31:16, Error CSI 00000099 (F) Failed
execution of queue item Installer: Generic Command
({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT
HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be
initiated after all the operations in the installer queue are completed;
installer is reliable (2)[gle=0x80004005]
2008-03-21 02:31:16, Info CSI 0000009a End executing
advanced installer (sequence 91)
Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)
Similar errors are repeated through phase 38, index 72. I can provide a full
log if anyone is interested.
Does anyone know what I can do to get it to install successfully?
32-bit, and it gets all the way to stage 3 where it says it failed and
reverts the installation. When I get back into Windows I get the following
message from the SP1 installer:
Windows Vista Service Pack 1 was not installed on your computer.
Error code: 0x800F0826.
I have run CheckSUR, and the System File Checker, but they did not help.
After checking the CBS.log file I found the following error that appears to
be preventing SP1 from installing:
2008-03-21 02:31:16, Info CSI 00000095 Begin executing
advanced installer phase 38 (0x00000026) index 52 (0x00000034) (sequence 91)
Old component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
Install mode: install
Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
Installer name: [15]"Generic Command"
2008-03-21 02:31:16, Info CSI 00000096 Calling generic
command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
CmdLine: [43]""C:\Windows\bfsvc.exe" C:\Windows\boot /mui"
2008-03-21 02:31:16, Error CSI 00000097 (F) Done with
generic command 3; CreateProcess returned 0, CPAW returned S_OK
Process exit code 15299 (0x00003bc3) resulted in success? FALSE
Process output: [l:0 ][gle=0x80004005]
2008-03-21 02:31:16, Info CSI
00000098@2008/3/21:07:31:16.928 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources,
Version = 6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;14997
2008-03-21 02:31:16, Error CSI 00000099 (F) Failed
execution of queue item Installer: Generic Command
({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT
HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be
initiated after all the operations in the installer queue are completed;
installer is reliable (2)[gle=0x80004005]
2008-03-21 02:31:16, Info CSI 0000009a End executing
advanced installer (sequence 91)
Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)
Similar errors are repeated through phase 38, index 72. I can provide a full
log if anyone is interested.
Does anyone know what I can do to get it to install successfully?
