Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

[Bruce Sanderson]

Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

I'm reasonably familiar with Terminal Services on Windows 2003, but not on
Windows Server 2008.

On Windows Server 2008 (RTM) Enterprise 64 bit, when I add the Terminal
Services Role, after the restart, Server Manager tells me that "Installation
succeeded with errors". I've copied the saved Server Manager installation
summary page below.

In the Setup Event Log, there is an Event with Source=ServerManager, Event
ID 1614 with essentially the same information, but no additional details.

Anyone have any clues about what this really means?

Terminal Services: Restart Pending


<Warning>: You must restart this server to finish the installation
process.


Full log (for troubleshooting only)
Terminal Services: Installation succeeded with errors


<Error>: Attempt to configure Terminal Server failed with error code
0x80004005. Error HRESULT E_FAIL has been returned from a call to a COM
component.

The following role services were installed:

Terminal Server

<Informational>: <a
href="ts_admin.chm::/html/57c897b5-ac6f-41de-a487-26fee7598c3f.htm">Manage
processor and memory resources used by this terminal server with WSRM.</a>

<Informational>: <a
href="ts_admin.chm::/html/21ea97a1-a75d-4ff6-87b1-faab342050a4.htm">Enable
Windows Vista features on this terminal server with Desktop Experience.</a


--
Bruce Sanderson
http://members.shaw.ca/bsanders/
It's perfectly useless to know the right answer to the wrong question.

 

[Ratnesh Yadav[MSFT]]

Re: Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

Re: Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

Can you provide more info like
- What TS mode you choose to install
- Did you selected "Network Authentication" required or not


"Bruce Sanderson" <bsanders@newsgroups.nospam> wrote in message
news:#OF9tqFlIHA.2368@TK2MSFTNGP03.phx.gbl...
> I'm reasonably familiar with Terminal Services on Windows 2003, but not on
> Windows Server 2008.
>
> On Windows Server 2008 (RTM) Enterprise 64 bit, when I add the Terminal
> Services Role, after the restart, Server Manager tells me that
> "Installation succeeded with errors". I've copied the saved Server
> Manager installation summary page below.
>
> In the Setup Event Log, there is an Event with Source=ServerManager, Event
> ID 1614 with essentially the same information, but no additional details.
>
> Anyone have any clues about what this really means?
>
> Terminal Services: Restart Pending
>
>
> <Warning>: You must restart this server to finish the installation
> process.
>
>
> Full log (for troubleshooting only)
> Terminal Services: Installation succeeded with errors
>
>
> <Error>: Attempt to configure Terminal Server failed with error code
> 0x80004005. Error HRESULT E_FAIL has been returned from a call to a COM
> component.
>
> The following role services were installed:
>
> Terminal Server
>
> <Informational>: <a
> href="ts_admin.chm::/html/57c897b5-ac6f-41de-a487-26fee7598c3f.htm">Manage
> processor and memory resources used by this terminal server with WSRM.</a>
>
> <Informational>: <a
> href="ts_admin.chm::/html/21ea97a1-a75d-4ff6-87b1-faab342050a4.htm">Enable
> Windows Vista features on this terminal server with Desktop Experience.</a
>
>
> --
> Bruce Sanderson
> http://members.shaw.ca/bsanders/
> It's perfectly useless to know the right answer to the wrong question.
>
>
>

 

[Bruce Sanderson]

Re: Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

Re: Installing Terminal Services on Windows 2008 - "Installation succeeded with errors"

Thank you for your quick response.

Not sure what you mean by "TS mode". When I added the Terminal Services
Role via Server Manager, there were 5 options:
Terminal Server
TS Web Access
TS Licensing
TS Gateway
TS Session Broker

I chose only the first option - Terminal Server.

I know that a 2008 TS License Server is "required", but this is a test
server so I chose not to install TS Licensing because I don't expect to be
using it for testing beyond the 120 day "Grace Period". When/if we decide
to upgrade our existing Windows Server 2003 Terminal Servers to Windows
Server 2008, we will then install the 2008 TS License service and acquire
the require TS CALs. Also, I could not find any documentation about how to
obtain TS CALs for a Volume License (Select) MSDN Subscription.

I do get the "balloon" warning that no TS License server could be contacted.

I did select "Network Authentication" - all the expected client computers
are running either Vista SP1 or have Version 6 of the Remote Desktop Client
installed.

--
Bruce Sanderson
http://members.shaw.ca/bsanders/
It's perfectly useless to know the right answer to the wrong question.


"Ratnesh Yadav[MSFT]" <ratneshyadav@hotmail.com> wrote in message
news:OPiSSGNlIHA.5280@TK2MSFTNGP02.phx.gbl...
> Can you provide more info like
> - What TS mode you choose to install
> - Did you selected "Network Authentication" required or not
>
>
> "Bruce Sanderson" <bsanders@newsgroups.nospam> wrote in message
> news:#OF9tqFlIHA.2368@TK2MSFTNGP03.phx.gbl...
>> I'm reasonably familiar with Terminal Services on Windows 2003, but not
>> on Windows Server 2008.
>>
>> On Windows Server 2008 (RTM) Enterprise 64 bit, when I add the Terminal
>> Services Role, after the restart, Server Manager tells me that
>> "Installation succeeded with errors". I've copied the saved Server
>> Manager installation summary page below.
>>
>> In the Setup Event Log, there is an Event with Source=ServerManager,
>> Event ID 1614 with essentially the same information, but no additional
>> details.
>>
>> Anyone have any clues about what this really means?
>>
>> Terminal Services: Restart Pending
>>
>>
>> <Warning>: You must restart this server to finish the installation
>> process.
>>
>>
>> Full log (for troubleshooting only)
>> Terminal Services: Installation succeeded with errors
>>
>>
>> <Error>: Attempt to configure Terminal Server failed with error code
>> 0x80004005. Error HRESULT E_FAIL has been returned from a call to a COM
>> component.
>>
>> The following role services were installed:
>>
>> Terminal Server
>>
>> <Informational>: <a
>> href="ts_admin.chm::/html/57c897b5-ac6f-41de-a487-26fee7598c3f.htm">Manage
>> processor and memory resources used by this terminal server with
>> WSRM.</a>
>>
>> <Informational>: <a
>> href="ts_admin.chm::/html/21ea97a1-a75d-4ff6-87b1-faab342050a4.htm">Enable
>> Windows Vista features on this terminal server with Desktop
>> Experience.</a
>>
>>
>> --
>> Bruce Sanderson
>> http://members.shaw.ca/bsanders/
>> It's perfectly useless to know the right answer to the wrong question.
>>
>>
>>

 

[adrian bromley]

Terminal server install

Terminal server install

- did you ever get it going? What was the solution? I have the exact same problem, and am unable to reslove it.

Thanks

Adrian

 

[Munindra Das [MSFT]]

Re: Terminal server install

Re: Terminal server install

Can you please repeat the problem?

--

Thanks!

This posting is provided "AS IS" with no warranties, and confers no rights.

"adrian bromley" wrote in message
news:2008617103921adrian@infosysco.co.uk...
>- did you ever get it going? What was the solution? I have the exact same
>problem, and am unable to reslove it.
>
> Thanks
>
> Adrian