Windows Firewall not working

  • Thread starter Thread starter Cesar
  • Start date Start date
C

Cesar

Guest
Hello,

I have a Windows Server 2003 R2 SP2 used as a stand alone server.
Every time I try to access the Windows Firewall console (interface), I get
the following error in the event viewer:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7023
Date: 31/07/2007
Time: 11:41:46 a.m.
User: N/A
Computer: PR-WFL
Description:
The Windows Firewall/Internet Connection Sharing (ICS) service terminated
with the following error:
The operating system cannot run Windows Firewall/Internet Connection Sharing
(ICS).

This above record in the event viewer appears after I click the "yes" button
to star the service (Windows Firewall / ICS) at the command prompt when
trying to acces the Windows Firewall.

"Windows Firewall cannot run because the Windows Firewall/Internet
Connection Sharing (ICS) is not running ... "

If I try to start the service manually, the same event is registered in the
event viewer; but addcionally, I get a dialog box with the following message:
"Error 182: 0xb6"

I've searched for this error, but I haven't been able to find any ideas as
to what is causing this problem and hjow to fix it.

Any idea will help.
Thanks in advance.
Cesar
 
Re: Windows Firewall not working

Try this command netsh winsock reset. please post back with the result.

Also this link may help too,

Microsoft Windows New release IssuesWindows Firewall running on DC - "Windows Firewall cannot run because another ... that might use the network address translation component (Ipnat.sys)." ...
http://www.howtonetworking.com/main.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Cesar" <Cesar@discussions.microsoft.com> wrote in message news:EAF288A0-6DBD-4A8F-8BBF-6F2ACAB8CEBC@microsoft.com...
Hello,

I have a Windows Server 2003 R2 SP2 used as a stand alone server.
Every time I try to access the Windows Firewall console (interface), I get
the following error in the event viewer:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7023
Date: 31/07/2007
Time: 11:41:46 a.m.
User: N/A
Computer: PR-WFL
Description:
The Windows Firewall/Internet Connection Sharing (ICS) service terminated
with the following error:
The operating system cannot run Windows Firewall/Internet Connection Sharing
(ICS).

This above record in the event viewer appears after I click the "yes" button
to star the service (Windows Firewall / ICS) at the command prompt when
trying to acces the Windows Firewall.

"Windows Firewall cannot run because the Windows Firewall/Internet
Connection Sharing (ICS) is not running ... "

If I try to start the service manually, the same event is registered in the
event viewer; but addcionally, I get a dialog box with the following message:
"Error 182: 0xb6"

I've searched for this error, but I haven't been able to find any ideas as
to what is causing this problem and hjow to fix it.

Any idea will help.
Thanks in advance.
Cesar
 
Re: Windows Firewall not working

Hello Robert,

Thank you for your help.

I'd already search for the other error " Windows Firewall cannot run because
another ... that might use the network address translation component
(Ipnat.sys)." and everything I found, pointed to disable the RRAS service;
which is its current state on the server.
Although if I open the RRAS console, it shows that the service is stopped
and unconfigured; but there's a blue arrow in the console whereas in other
server it has a red one.

As to running the "netsh winsock reset" command, would that cause anything
to stop from working; I mean this is a production server and has installed a
several apps (lotus domino server included) and what I read about this
command is that it will rebuild the network settings from scratch (probably
the result as removing & reinstalling TCP/IP protocol).

Thanks
Kind regards,
Cesar

"Robert L [MVP - Networking]" wrote:

> Try this command netsh winsock reset. please post back with the result.
>
> Also this link may help too,
>
> Microsoft Windows New release IssuesWindows Firewall running on DC - "Windows Firewall cannot run because another ... that might use the network address translation component (Ipnat.sys)." ...
> http://www.howtonetworking.com/main.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "Cesar" <Cesar@discussions.microsoft.com> wrote in message news:EAF288A0-6DBD-4A8F-8BBF-6F2ACAB8CEBC@microsoft.com...
> Hello,
>
> I have a Windows Server 2003 R2 SP2 used as a stand alone server.
> Every time I try to access the Windows Firewall console (interface), I get
> the following error in the event viewer:
>
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7023
> Date: 31/07/2007
> Time: 11:41:46 a.m.
> User: N/A
> Computer: PR-WFL
> Description:
> The Windows Firewall/Internet Connection Sharing (ICS) service terminated
> with the following error:
> The operating system cannot run Windows Firewall/Internet Connection Sharing
> (ICS).
>
> This above record in the event viewer appears after I click the "yes" button
> to star the service (Windows Firewall / ICS) at the command prompt when
> trying to acces the Windows Firewall.
>
> "Windows Firewall cannot run because the Windows Firewall/Internet
> Connection Sharing (ICS) is not running ... "
>
> If I try to start the service manually, the same event is registered in the
> event viewer; but addcionally, I get a dialog box with the following message:
> "Error 182: 0xb6"
>
> I've searched for this error, but I haven't been able to find any ideas as
> to what is causing this problem and hjow to fix it.
>
> Any idea will help.
> Thanks in advance
 
Back
Top