WDS in 2008

  • Thread starter Thread starter rfalken
  • Start date Start date
R

rfalken

Guest
Hey,

Does anyone know what drivers to use with a HP Blade 460c. Its a Broadcom
NetExtreme II NIC and i have tried the drivers from HP's homepage and i have
tried the Broadcom NetExtreme II MONOLITHIC drivers from they homepage. None
of them worked or when the WIN2008 image boots it still shows and error where
it cannot find the drivers for the NIC.

From within the driver packages i have extracted the files and then i have
mounted the boot.wim and then i ran peimg /inf=C:\broadcom\b06nd.inf c:\mount
and afterwards i did and unmount and comitted the changes. PEIMG and the
unmount was all done successfully and i have the driver in the filereposotory.

Any help would be nice.

/Regards
René
 
RE: WDS in 2008

Just a small update.

If i press shift f10 and get and cmd from the winpe and then i load the
driver with drvload from the \windows\system32\driverstore\filerepository
then the driver loads as it should, what could i be missing ???

"rfalken" wrote:

> Hey,
>
> Does anyone know what drivers to use with a HP Blade 460c. Its a Broadcom
> NetExtreme II NIC and i have tried the drivers from HP's homepage and i have
> tried the Broadcom NetExtreme II MONOLITHIC drivers from they homepage. None
> of them worked or when the WIN2008 image boots it still shows and error where
> it cannot find the drivers for the NIC.
>
> From within the driver packages i have extracted the files and then i have
> mounted the boot.wim and then i ran peimg /inf=C:\broadcom\b06nd.inf c:\mount
> and afterwards i did and unmount and comitted the changes. PEIMG and the
> unmount was all done successfully and i have the driver in the filereposotory.
>
> Any help would be nice.
>
> /Regards
> René
 
RE: WDS in 2008

I found the error. I have first injected the broadcom normal driver for
netextreme ii. Then i found out that i must use the broadcom MONOLITHIC
driver instead, so i injected that driver.

Now i simply deleted my images on the WDS and then i loaded the boot.wim
file into WDS again and now i only injected the MONOLITHIC driver and now it
works.

"rfalken" wrote:

> Just a small update.
>
> If i press shift f10 and get and cmd from the winpe and then i load the
> driver with drvload from the \windows\system32\driverstore\filerepository
> then the driver loads as it should, what could i be missing ???
>
> "rfalken" wrote:
>
> > Hey,
> >
> > Does anyone know what drivers to use with a HP Blade 460c. Its a Broadcom
> > NetExtreme II NIC and i have tried the drivers from HP's homepage and i have
> > tried the Broadcom NetExtreme II MONOLITHIC drivers from they homepage. None
> > of them worked or when the WIN2008 image boots it still shows and error where
> > it cannot find the drivers for the NIC.
> >
> > From within the driver packages i have extracted the files and then i have
> > mounted the boot.wim and then i ran peimg /inf=C:\broadcom\b06nd.inf c:\mount
> > and afterwards i did and unmount and comitted the changes. PEIMG and the
> > unmount was all done successfully and i have the driver in the filereposotory.
> >
> > Any help would be nice.
> >
> > /Regards
> > René
 
Back
Top