netgear

  • Thread starter Thread starter mc
  • Start date Start date
M

mc

Guest
This is a repeat of last years post on the GA511NA pc card I put in my
toshiba 225 cds laptop. I have tried several installs/uninstalls with no
luck. The install wizard asks for the 98se disk sometimes and sometimes not.
The device manager shows the yellow icon for this installation but I just
can not get it to work. Any network guru's out there?
mc
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
> This is a repeat of last years post on the GA511NA pc card I put in my
> toshiba 225 cds laptop. I have tried several installs/uninstalls with no
> luck. The install wizard asks for the 98se disk sometimes and sometimes
not.
> The device manager shows the yellow icon for this installation but I just
> can not get it to work. Any network guru's out there?
> mc
>
>

You need to go the the manufacturer's website and download the proper
drivers for your device.
(and install them of course)
I doubt if the drivers for that device would exist within Win98.

BTW: If the card is fairly new and Netgear does not have win98 drivers on
their site...
I did see win9x drivers at www.driverguide.com ...of course I cannot say if
they actually work or not.
 
Re: netgear

I do have the cd that came with this, and it shows 98se on the operating
list, so I'm assuming it should work?
mc
"philo" <philo@privacy.net> wrote in message
news:u3L7MxJqIHA.3804@TK2MSFTNGP02.phx.gbl...
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
>> This is a repeat of last years post on the GA511NA pc card I put in my
>> toshiba 225 cds laptop. I have tried several installs/uninstalls with no
>> luck. The install wizard asks for the 98se disk sometimes and sometimes
> not.
>> The device manager shows the yellow icon for this installation but I just
>> can not get it to work. Any network guru's out there?
>> mc
>>
>>
>
> You need to go the the manufacturer's website and download the proper
> drivers for your device.
> (and install them of course)
> I doubt if the drivers for that device would exist within Win98.
>
> BTW: If the card is fairly new and Netgear does not have win98 drivers on
> their site...
> I did see win9x drivers at www.driverguide.com ...of course I cannot say
> if
> they actually work or not.
>
>
>
>
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:%23DL5YCKqIHA.2068@TK2MSFTNGP05.phx.gbl...
>I do have the cd that came with this, and it shows 98se on the operating
>list, so I'm assuming it should work?
> mc
> "


That's good news.

Does the CD have a win9x folder
or is the driver in the self-extracting executable format?
 
Re: netgear

it has a win 98 folder
mc
"philo" <philo@privacy.net> wrote in message
news:%23dC4KiKqIHA.2256@TK2MSFTNGP05.phx.gbl...
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:%23DL5YCKqIHA.2068@TK2MSFTNGP05.phx.gbl...
>>I do have the cd that came with this, and it shows 98se on the operating
>>list, so I'm assuming it should work?
>> mc
>> "
>
>
> That's good news.
>
> Does the CD have a win9x folder
> or is the driver in the self-extracting executable format?
>
>
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:eJ1y$0KqIHA.4848@TK2MSFTNGP05.phx.gbl...
> it has a win 98 folder
> mc
> "philo" <philo@privacy.net> wrote in message
> news:%23dC4KiKqIHA.2256@TK2MSFTNGP05.phx.gbl...
>>
>> "mc" <wcwall.awm@verizon.net> wrote in message
>> news:%23DL5YCKqIHA.2068@TK2MSFTNGP05.phx.gbl...
>>>I do have the cd that came with this, and it shows 98se on the operating
>>>list, so I'm assuming it should work?
>>> mc
>>> "
>>
>>
>> That's good news.
>>
>> Does the CD have a win9x folder
>> or is the driver in the self-extracting executable format?
>>
>>
>
>

Good.
When you go to install the device...all you should have to do is point to
installer to that folder.
If the device is installed but with the yellow warning exclaimation mark in
device manager
you'll need to take the option to reinstall the drivers
 
Re: netgear

1. Netgear Tech Support (800) 211-2069

2. If the installation CD installed anything in Add/Remove Programs, remove
it.

3. Go to the Network applet in Control Panel and remove EVERYTHING there.

4. Go to System applet in Control Panel and make sure nothing having to do
with ANY networking is still installed (I'm mostly thinking of items that
probably have a yellow exclamation mark, but you don't want ANY newtork
adapter.) I assume you perhaps have a modem of some kind, and yes, I DO want
you to remove it and any auxiliary devices that might be part of its
installation. You can reinstall that later (just make sure you have the
drivers first.)

5. Shut down the system, and with the adapter unplugged, restart the system.
Once it's fully started (some hardware may automatically reinstall... Oh
well...), see my article at http://grystmill.com/articles/cleanboot.htm. Set
up a Clean Boot and then run the Netgear installation CD.

(Ignore the reference to another article about Security as that article is
under revision.)

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com


"mc" <wcwall.awm@verizon.net> wrote in message
news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
> This is a repeat of last years post on the GA511NA pc card I put in my
> toshiba 225 cds laptop. I have tried several installs/uninstalls with no
> luck. The install wizard asks for the 98se disk sometimes and sometimes
> not. The device manager shows the yellow icon for this installation but I
> just can not get it to work. Any network guru's out there?
> mc
>
 
Re: netgear

Sorry, didn't finish.

6. Once the Netgear adapter is installed and tested as working fine, finish
reinstalling any other hardware (the modem?).

7. Take your system out of Clean Boot mode.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Gary S. Terhune" <none> wrote in message
news:u3XgNaLqIHA.4904@TK2MSFTNGP03.phx.gbl...
> 1. Netgear Tech Support (800) 211-2069
>
> 2. If the installation CD installed anything in Add/Remove Programs,
> remove it.
>
> 3. Go to the Network applet in Control Panel and remove EVERYTHING there.
>
> 4. Go to System applet in Control Panel and make sure nothing having to do
> with ANY networking is still installed (I'm mostly thinking of items that
> probably have a yellow exclamation mark, but you don't want ANY newtork
> adapter.) I assume you perhaps have a modem of some kind, and yes, I DO
> want you to remove it and any auxiliary devices that might be part of its
> installation. You can reinstall that later (just make sure you have the
> drivers first.)
>
> 5. Shut down the system, and with the adapter unplugged, restart the
> system. Once it's fully started (some hardware may automatically
> reinstall... Oh well...), see my article at
> http://grystmill.com/articles/cleanboot.htm. Set up a Clean Boot and then
> run the Netgear installation CD.
>
> (Ignore the reference to another article about Security as that article is
> under revision.)
>
> --
> Gary S. Terhune
> MS-MVP Shell/User
> www.grystmill.com
>
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
>> This is a repeat of last years post on the GA511NA pc card I put in my
>> toshiba 225 cds laptop. I have tried several installs/uninstalls with no
>> luck. The install wizard asks for the 98se disk sometimes and sometimes
>> not. The device manager shows the yellow icon for this installation but I
>> just can not get it to work. Any network guru's out there?
>> mc
>>
>
 
Re: netgear

I've tried that with no luck, this is a stubborn machine..
mc
"philo" <philo@privacy.net> wrote in message
news:O0n7UNLqIHA.3408@TK2MSFTNGP03.phx.gbl...
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:eJ1y$0KqIHA.4848@TK2MSFTNGP05.phx.gbl...
>> it has a win 98 folder
>> mc
>> "philo" <philo@privacy.net> wrote in message
>> news:%23dC4KiKqIHA.2256@TK2MSFTNGP05.phx.gbl...
>>>
>>> "mc" <wcwall.awm@verizon.net> wrote in message
>>> news:%23DL5YCKqIHA.2068@TK2MSFTNGP05.phx.gbl...
>>>>I do have the cd that came with this, and it shows 98se on the
>>>>operating list, so I'm assuming it should work?
>>>> mc
>>>> "
>>>
>>>
>>> That's good news.
>>>
>>> Does the CD have a win9x folder
>>> or is the driver in the self-extracting executable format?
>>>
>>>
>>
>>
>
> Good.
> When you go to install the device...all you should have to do is point to
> installer to that folder.
> If the device is installed but with the yellow warning exclaimation mark
> in device manager
> you'll need to take the option to reinstall the drivers
>
 
Re: netgear

Thanks I'll work on this later this week..
mc
"Gary S. Terhune" <none> wrote in message
news:uVGeCdLqIHA.1436@TK2MSFTNGP05.phx.gbl...
> Sorry, didn't finish.
>
> 6. Once the Netgear adapter is installed and tested as working fine,
> finish reinstalling any other hardware (the modem?).
>
> 7. Take your system out of Clean Boot mode.
>
> --
> Gary S. Terhune
> MS-MVP Shell/User
> www.grystmill.com
>
> "Gary S. Terhune" <none> wrote in message
> news:u3XgNaLqIHA.4904@TK2MSFTNGP03.phx.gbl...
>> 1. Netgear Tech Support (800) 211-2069
>>
>> 2. If the installation CD installed anything in Add/Remove Programs,
>> remove it.
>>
>> 3. Go to the Network applet in Control Panel and remove EVERYTHING there.
>>
>> 4. Go to System applet in Control Panel and make sure nothing having to
>> do with ANY networking is still installed (I'm mostly thinking of items
>> that probably have a yellow exclamation mark, but you don't want ANY
>> newtork adapter.) I assume you perhaps have a modem of some kind, and
>> yes, I DO want you to remove it and any auxiliary devices that might be
>> part of its installation. You can reinstall that later (just make sure
>> you have the drivers first.)
>>
>> 5. Shut down the system, and with the adapter unplugged, restart the
>> system. Once it's fully started (some hardware may automatically
>> reinstall... Oh well...), see my article at
>> http://grystmill.com/articles/cleanboot.htm. Set up a Clean Boot and then
>> run the Netgear installation CD.
>>
>> (Ignore the reference to another article about Security as that article
>> is under revision.)
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>>
>> "mc" <wcwall.awm@verizon.net> wrote in message
>> news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
>>> This is a repeat of last years post on the GA511NA pc card I put in my
>>> toshiba 225 cds laptop. I have tried several installs/uninstalls with no
>>> luck. The install wizard asks for the 98se disk sometimes and sometimes
>>> not. The device manager shows the yellow icon for this installation but
>>> I just can not get it to work. Any network guru's out there?
>>> mc
>>>
>>
>
 
Re: netgear

> "philo" <philo@privacy.net> wrote in message
> news:O0n7UNLqIHA.3408@TK2MSFTNGP03.phx.gbl...

> >> "philo" <philo@privacy.net> wrote in message

> > When you go to install the device...all you should have to do is point
to
> > installer to that folder.
> > If the device is installed but with the yellow warning exclaimation mark
> > in device manager
> > you'll need to take the option to reinstall the drivers

"mc" <wcwall.awm@verizon.net> wrote in message
news:epmY9GMqIHA.5096@TK2MSFTNGP02.phx.gbl...

> I've tried that with no luck, this is a stubborn machine..

We do not understand what you did, and do not
understand "no luck." The point is that instal CDs may
have more than one SETUP.EXE -- so if using a legacy
OS like Win98 we must first navigate to the Win98
folder and run the SETUP there and no other (or
similarly for DEVICE.INF files, which can show multiple
identical filenames on a CD even though their contents
may be different (some Win98 or XP or Vista.)

We still need to know what you did and what happened,
e.g. did you reinstal via Plug & Play (removing the device
and rebooting for boot-time detection) or from the
/Device Manager / Properties /Update menu or directly
from /Win98/DEVICE.INF on the CD? We do not know
what happened, whether your procedure installed the
same drivers or different drivers that work no better.

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)
 
Re: netgear


"Don Phillipson" <e925@SPAMBLOCK.ncf.ca> wrote in message
news:ed4q8qMqIHA.1768@TK2MSFTNGP03.phx.gbl...
> > "philo" <philo@privacy.net> wrote in message
> > news:O0n7UNLqIHA.3408@TK2MSFTNGP03.phx.gbl...
>
> > >> "philo" <philo@privacy.net> wrote in message
>
> > > When you go to install the device...all you should have to do is point
> to
> > > installer to that folder.
> > > If the device is installed but with the yellow warning exclaimation
mark
> > > in device manager
> > > you'll need to take the option to reinstall the drivers
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:epmY9GMqIHA.5096@TK2MSFTNGP02.phx.gbl...
>
> > I've tried that with no luck, this is a stubborn machine..
>
> We do not understand what you did, and do not
> understand "no luck." The point is that instal CDs may
> have more than one SETUP.EXE -- so if using a legacy
> OS like Win98 we must first navigate to the Win98
> folder and run the SETUP there and no other (or
> similarly for DEVICE.INF files, which can show multiple
> identical filenames on a CD even though their contents
> may be different (some Win98 or XP or Vista.)
>
> We still need to know what you did and what happened,
> e.g. did you reinstal via Plug & Play (removing the device
> and rebooting for boot-time detection) or from the
> /Device Manager / Properties /Update menu or directly
> from /Win98/DEVICE.INF on the CD? We do not know
> what happened, whether your procedure installed the
> same drivers or different drivers that work no better.



I agree.
We need to know *exactly* what you mean by "no luck"
a verbatum quotation of the error message would be in order here.
 
Re: netgear

I just noticed one major screw-up in my instructions -- when you go into
Device Manager to make sure it's free of any networking devices, modem,
modem enumerator, etc., it should be done in Safe Mode. I'm getting too old
for this.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"mc" <wcwall.awm@verizon.net> wrote in message
news:Or6bSHMqIHA.4672@TK2MSFTNGP05.phx.gbl...
> Thanks I'll work on this later this week..
> mc
> "Gary S. Terhune" <none> wrote in message
> news:uVGeCdLqIHA.1436@TK2MSFTNGP05.phx.gbl...
>> Sorry, didn't finish.
>>
>> 6. Once the Netgear adapter is installed and tested as working fine,
>> finish reinstalling any other hardware (the modem?).
>>
>> 7. Take your system out of Clean Boot mode.
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>> "Gary S. Terhune" <none> wrote in message
>> news:u3XgNaLqIHA.4904@TK2MSFTNGP03.phx.gbl...
>>> 1. Netgear Tech Support (800) 211-2069
>>>
>>> 2. If the installation CD installed anything in Add/Remove Programs,
>>> remove it.
>>>
>>> 3. Go to the Network applet in Control Panel and remove EVERYTHING
>>> there.
>>>
>>> 4. Go to System applet in Control Panel and make sure nothing having to
>>> do with ANY networking is still installed (I'm mostly thinking of items
>>> that probably have a yellow exclamation mark, but you don't want ANY
>>> newtork adapter.) I assume you perhaps have a modem of some kind, and
>>> yes, I DO want you to remove it and any auxiliary devices that might be
>>> part of its installation. You can reinstall that later (just make sure
>>> you have the drivers first.)
>>>
>>> 5. Shut down the system, and with the adapter unplugged, restart the
>>> system. Once it's fully started (some hardware may automatically
>>> reinstall... Oh well...), see my article at
>>> http://grystmill.com/articles/cleanboot.htm. Set up a Clean Boot and
>>> then run the Netgear installation CD.
>>>
>>> (Ignore the reference to another article about Security as that article
>>> is under revision.)
>>>
>>> --
>>> Gary S. Terhune
>>> MS-MVP Shell/User
>>> www.grystmill.com
>>>
>>>
>>> "mc" <wcwall.awm@verizon.net> wrote in message
>>> news:uxCEeTJqIHA.4376@TK2MSFTNGP06.phx.gbl...
>>>> This is a repeat of last years post on the GA511NA pc card I put in my
>>>> toshiba 225 cds laptop. I have tried several installs/uninstalls with
>>>> no luck. The install wizard asks for the 98se disk sometimes and
>>>> sometimes not. The device manager shows the yellow icon for this
>>>> installation but I just can not get it to work. Any network guru's out
>>>> there?
>>>> mc
>>>>
>>>
>>
>
>
 
Re: netgear

I have tried reinstalling the driver in the device manager navigating to the
cd win 98 folder mostly. But initially I ran the setup from the cd auto
starting itself.Then I shut down and inserted the card and re-booted and
made many attempts to reinstall in the device manager.

I removed it from the device manager once and had a dificult time getting it
to re-appear in the device manager.
I think I tried letting win 98 install its own drivers a few times but I do
not remember..that was last year, so I'm guessing I need to remove whatever
I see in networking and start over?
mc

"Don Phillipson" <e925@SPAMBLOCK.ncf.ca> wrote in message
news:ed4q8qMqIHA.1768@TK2MSFTNGP03.phx.gbl...
>> "philo" <philo@privacy.net> wrote in message
>> news:O0n7UNLqIHA.3408@TK2MSFTNGP03.phx.gbl...
>
>> >> "philo" <philo@privacy.net> wrote in message
>
>> > When you go to install the device...all you should have to do is point
> to
>> > installer to that folder.
>> > If the device is installed but with the yellow warning exclaimation
>> > mark
>> > in device manager
>> > you'll need to take the option to reinstall the drivers
>
> "mc" <wcwall.awm@verizon.net> wrote in message
> news:epmY9GMqIHA.5096@TK2MSFTNGP02.phx.gbl...
>
>> I've tried that with no luck, this is a stubborn machine..
>
> We do not understand what you did, and do not
> understand "no luck." The point is that instal CDs may
> have more than one SETUP.EXE -- so if using a legacy
> OS like Win98 we must first navigate to the Win98
> folder and run the SETUP there and no other (or
> similarly for DEVICE.INF files, which can show multiple
> identical filenames on a CD even though their contents
> may be different (some Win98 or XP or Vista.)
>
> We still need to know what you did and what happened,
> e.g. did you reinstal via Plug & Play (removing the device
> and rebooting for boot-time detection) or from the
> /Device Manager / Properties /Update menu or directly
> from /Win98/DEVICE.INF on the CD? We do not know
> what happened, whether your procedure installed the
> same drivers or different drivers that work no better.
>
> --
> Don Phillipson
> Carlsbad Springs
> (Ottawa, Canada)
>
>
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:%23CuvYlYqIHA.4280@TK2MSFTNGP02.phx.gbl...
> I have tried reinstalling the driver in the device manager navigating to
the
> cd win 98 folder mostly. But initially I ran the setup from the cd auto
> starting itself.Then I shut down and inserted the card and re-booted and
> made many attempts to reinstall in the device manager.
>

You need to point the installer to the win98 folder on the cd that came with
your netcard.
It needs to read the .inf file

Have a look there to be sure you do have an .inf file

BTW: one very rare occasions I've seen mfg's have the .inf file be a hidden
file.
so if you do not see the inf file...enable "hidden" files to be shown in
Windows explorer.
Again, it's not too often that mfg's make that mistake



> I removed it from the device manager once and had a dificult time getting
it
> to re-appear in the device manager.
> I think I tried letting win 98 install its own drivers a few times but I
do
> not remember..that was last year, so I'm guessing I need to remove
whatever
> I see in networking and start over?
> mc


Well, if the correct drivers do exist in the Netgear driver cd...
then yes...you may want to boot to safe mode...
then remove all instances of the Netgear card...
reboot and let Windows re-detect it.

At that point you will need to insert the drive cd that came with the card
and point it to the win98 drivers folder


Good luck...Hope you get it working!

>
> "Don Phillipson" <e925@SPAMBLOCK.ncf.ca> wrote in message
> news:ed4q8qMqIHA.1768@TK2MSFTNGP03.phx.gbl...
> >> "philo" <philo@privacy.net> wrote in message
> >> news:O0n7UNLqIHA.3408@TK2MSFTNGP03.phx.gbl...
> >
> >> >> "philo" <philo@privacy.net> wrote in message
> >
> >> > When you go to install the device...all you should have to do is
point
> > to
> >> > installer to that folder.
> >> > If the device is installed but with the yellow warning exclaimation
> >> > mark
> >> > in device manager
> >> > you'll need to take the option to reinstall the drivers
> >
> > "mc" <wcwall.awm@verizon.net> wrote in message
> > news:epmY9GMqIHA.5096@TK2MSFTNGP02.phx.gbl...
> >
> >> I've tried that with no luck, this is a stubborn machine..
> >
> > We do not understand what you did, and do not
> > understand "no luck." The point is that instal CDs may
> > have more than one SETUP.EXE -- so if using a legacy
> > OS like Win98 we must first navigate to the Win98
> > folder and run the SETUP there and no other (or
> > similarly for DEVICE.INF files, which can show multiple
> > identical filenames on a CD even though their contents
> > may be different (some Win98 or XP or Vista.)
> >
> > We still need to know what you did and what happened,
> > e.g. did you reinstal via Plug & Play (removing the device
> > and rebooting for boot-time detection) or from the
> > /Device Manager / Properties /Update menu or directly
> > from /Win98/DEVICE.INF on the CD? We do not know
> > what happened, whether your procedure installed the
> > same drivers or different drivers that work no better.
> >
> > --
> > Don Phillipson
> > Carlsbad Springs
> > (Ottawa, Canada)
> >
> >
>
>
 
Re: netgear

"mc" <wcwall.awm@verizon.net> wrote in message
news:%23CuvYlYqIHA.4280@TK2MSFTNGP02.phx.gbl...
>I have tried reinstalling the driver in the device manager navigating to the cd
>win 98 folder mostly. But initially I ran the setup from the cd auto starting
>itself.Then I shut down and inserted the card and re-booted and made many
>attempts to reinstall in the device manager.
>
> I removed it from the device manager once and had a dificult time getting it
> to re-appear in the device manager.
> I think I tried letting win 98 install its own drivers a few times but I do
> not remember..that was last year, so I'm guessing I need to remove whatever I
> see in networking and start over?
> mc

Did you install the driver and utility software first, remove the CD, reboot
if prompted, back at the desktop run the Found New Hardware wizard selecting
"Automatically install.....", when complete shutdown, restart and once back at
the desktop configure the adapter for your network as suggested in the document?
http://kbserver.netgear.com/pdf/ga5...pdf/ga511_install_guide.pdf&answer_id=2101359

or if the link wraps/breaks: http://tinyurl.com/3ncw55

--


Brian A. Sesko { MS MVP_Windows Desktop User Experience }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375
 
Re: netgear

"mc" <wcwall.awm@verizon.net> wrote in message
news:%23CuvYlYqIHA.4280@TK2MSFTNGP02.phx.gbl...
>I have tried reinstalling the driver in the device manager navigating to the cd
>win 98 folder mostly. But initially I ran the setup from the cd auto starting
>itself.Then I shut down and inserted the card and re-booted and made many
>attempts to reinstall in the device manager.
>
> I removed it from the device manager once and had a dificult time getting it
> to re-appear in the device manager.
> I think I tried letting win 98 install its own drivers a few times but I do
> not remember..that was last year, so I'm guessing I need to remove whatever I
> see in networking and start over?
> mc

BTW, here is the manual for the adapter:
http://kbserver.netgear.com/pdf/ga5...m/pdf/ga511_user_manual.pdf&answer_id=2101357

or if the link warps/breaks: http://tinyurl.com/42yp4c

and the Netgear GA511 adapter page:
http://kbserver.netgear.com/products/ga511.asp

--


Brian A. Sesko { MS MVP_Windows Desktop User Experience }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375
 
Re: netgear

I followed philo's instructions installing a new fa311v2 in another win 98
machine and used the win 2000 driver and it worked perfectly. still playing
with this toshiba though...
mc
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:ut583qerIHA.4544@TK2MSFTNGP04.phx.gbl...
> I followed philo's instructions installing a new fa311v2 in another win 98
> machine and used the win 2000 driver and it worked perfectly. still
playing
> with this toshiba though...
> mc
>
>


Hey...thanks for posting back
and i'm glad you got it working...

but a win98 driver should really have been used.

Only rarely will I see a win2k driver work on win98 and I probably would
have recommended
against trying it...
but you cannot argue with success.
 
Re: netgear


"mc" <wcwall.awm@verizon.net> wrote in message
news:ut583qerIHA.4544@TK2MSFTNGP04.phx.gbl...
> I followed philo's instructions installing a new fa311v2 in another win 98
> machine and used the win 2000 driver and it worked perfectly. still
playing
> with this toshiba though...
> mc
>
>


oops

I totally missed that you still did *not* get it working in the Toshiba yet.

I think I just read as much as the "worked perfectly" part...

anyway...if you are still struggling with the Toshiba...

I'd really caution you against using a win2k driver...


you should make all efforts to find the right win98 driver...

I'm getting too tired to read through all the back posts now...

but Gary has put you in the right direction by telling you to start over
from scratch
by deleting your network devices in safe mode.


zzzzzzzzzzz
 
Back
Top