Server Time

  • Thread starter Thread starter filip
  • Start date Start date
F

filip

Guest
I keep getting the below error over and over again in my server 2003 rc2
system event log,
i have looked up the error and it says that the problem is "your Kerberos
cannot resolve
a request from another host", but this is the same host, allso that the
couse is time difference,
how could this be possible if it is the same machine ( Server Name:
host/credo_exchange.credobanka.hr
Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)

A Kerberos Error Message was received:
on logon session
Client Time:
Server Time: 10:37:18.0000 5/7/2008 Z
Error Code: 0xd KDC_ERR_BADOPTION
Extended Error: 0xc00000bb KLIN(0)
Client Realm:
Client Name:
Server Realm: CREDOBANKA.HR
Server Name: host/credo_exchange.credobanka.hr
Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
Error Text:
File: 9
Line: ae0
Error Data is in record data.

For more information, see Help and Support Center at
 
Re: Server Time

Hello filip,

If you press the 2 paper button in the right corner of the event properties
you can copy the complete error here. The event No is missing, so please
post the complete event again.

Also do you really use an RC Release candidate version from 2003?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I keep getting the below error over and over again in my server 2003
> rc2
> system event log,
> i have looked up the error and it says that the problem is "your
> Kerberos
> cannot resolve
> a request from another host", but this is the same host, allso that
> the
> couse is time difference,
> how could this be possible if it is the same machine ( Server Name:
> host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)
> A Kerberos Error Message was received:
> on logon session
> Client Time:
> Server Time: 10:37:18.0000 5/7/2008 Z
> Error Code: 0xd KDC_ERR_BADOPTION
> Extended Error: 0xc00000bb KLIN(0)
> Client Realm:
> Client Name:
> Server Realm: CREDOBANKA.HR
> Server Name: host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
> Error Text:
> File: 9
> Line: ae0
> Error Data is in record data.
> For more information, see Help and Support Center at
>
 
Re: Server Time

Sorry, i misstyped it is 2003 R2 SP2.
Here is a newer log, but as you asked.

Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 3
Date: 7.5.2008
Time: 22:52:44
User: N/A
Computer: CREDO_EXCHANGE
Description:
A Kerberos Error Message was received:
on logon session
Client Time:
Server Time: 20:52:44.0000 5/7/2008 Z
Error Code: 0xd KDC_ERR_BADOPTION
Extended Error: 0xc00000bb KLIN(0)
Client Realm:
Client Name:
Server Realm: CREDOBANKA.HR
Server Name: host/credo_exchange.credobanka.hr
Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
Error Text:
File: 9
Line: ae0
Error Data is in record data.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 30 15 a1 03 02 01 03 a2 0.!....c
0008: 0e 04 0c bb 00 00 c0 00 .....A.
0010: 00 00 00 03 00 00 00 .......

<Meinolf Weber> wrote in message
news:ff16fb6698a5c8ca7e5c2d6a05b0@msnews.microsoft.com...
> Hello filip,
>
> If you press the 2 paper button in the right corner of the event
> properties you can copy the complete error here. The event No is missing,
> so please post the complete event again.
>
> Also do you really use an RC Release candidate version from 2003?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> I keep getting the below error over and over again in my server 2003
>> rc2
>> system event log,
>> i have looked up the error and it says that the problem is "your
>> Kerberos
>> cannot resolve
>> a request from another host", but this is the same host, allso that
>> the
>> couse is time difference,
>> how could this be possible if it is the same machine ( Server Name:
>> host/credo_exchange.credobanka.hr
>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)
>> A Kerberos Error Message was received:
>> on logon session
>> Client Time:
>> Server Time: 10:37:18.0000 5/7/2008 Z
>> Error Code: 0xd KDC_ERR_BADOPTION
>> Extended Error: 0xc00000bb KLIN(0)
>> Client Realm:
>> Client Name:
>> Server Realm: CREDOBANKA.HR
>> Server Name: host/credo_exchange.credobanka.hr
>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>> Error Text:
>> File: 9
>> Line: ae0
>> Error Data is in record data.
>> For more information, see Help and Support Center at
>>
>
>
 
Re: Server Time

Hello filip,

CHeck out if kerberos logging is enabled, if yes disable it.
http://support.microsoft.com/kb/q262177/

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Sorry, i misstyped it is 2003 R2 SP2.
> Here is a newer log, but as you asked.
> Event Type: Error
> Event Source: Kerberos
> Event Category: None
> Event ID: 3
> Date: 7.5.2008
> Time: 22:52:44
> User: N/A
> Computer: CREDO_EXCHANGE
> Description:
> A Kerberos Error Message was received:
> on logon session
> Client Time:
> Server Time: 20:52:44.0000 5/7/2008 Z
> Error Code: 0xd KDC_ERR_BADOPTION
> Extended Error: 0xc00000bb KLIN(0)
> Client Realm:
> Client Name:
> Server Realm: CREDOBANKA.HR
> Server Name: host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
> Error Text:
> File: 9
> Line: ae0
> Error Data is in record data.
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
> 0010: 00 00 00 03 00 00 00 .......
> <Meinolf Weber> wrote in message
> news:ff16fb6698a5c8ca7e5c2d6a05b0@msnews.microsoft.com...
>
>> Hello filip,
>>
>> If you press the 2 paper button in the right corner of the event
>> properties you can copy the complete error here. The event No is
>> missing, so please post the complete event again.
>>
>> Also do you really use an RC Release candidate version from 2003?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I keep getting the below error over and over again in my server 2003
>>> rc2
>>> system event log,
>>> i have looked up the error and it says that the problem is "your
>>> Kerberos
>>> cannot resolve
>>> a request from another host", but this is the same host, allso that
>>> the
>>> couse is time difference,
>>> how could this be possible if it is the same machine ( Server Name:
>>> host/credo_exchange.credobanka.hr
>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)
>>> A Kerberos Error Message was received:
>>> on logon session
>>> Client Time:
>>> Server Time: 10:37:18.0000 5/7/2008 Z
>>> Error Code: 0xd KDC_ERR_BADOPTION
>>> Extended Error: 0xc00000bb KLIN(0)
>>> Client Realm:
>>> Client Name:
>>> Server Realm: CREDOBANKA.HR
>>> Server Name: host/credo_exchange.credobanka.hr
>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>> Error Text:
>>> File: 9
>>> Line: ae0
>>> Error Data is in record data.
>>> For more information, see Help and Support Center at
 
Re: Server Time

That dosen't solve my problem, i need to see if there is a problem with
kerberos ticket handling,
so looging has to stay on, but i need to see what coused this error. Any
suggestions
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6698b978ca7eb6a100c3f3@msnews.microsoft.com...
> Hello filip,
>
> CHeck out if kerberos logging is enabled, if yes disable it.
> http://support.microsoft.com/kb/q262177/
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Sorry, i misstyped it is 2003 R2 SP2.
>> Here is a newer log, but as you asked.
>> Event Type: Error
>> Event Source: Kerberos
>> Event Category: None
>> Event ID: 3
>> Date: 7.5.2008
>> Time: 22:52:44
>> User: N/A
>> Computer: CREDO_EXCHANGE
>> Description:
>> A Kerberos Error Message was received:
>> on logon session
>> Client Time:
>> Server Time: 20:52:44.0000 5/7/2008 Z
>> Error Code: 0xd KDC_ERR_BADOPTION
>> Extended Error: 0xc00000bb KLIN(0)
>> Client Realm:
>> Client Name:
>> Server Realm: CREDOBANKA.HR
>> Server Name: host/credo_exchange.credobanka.hr
>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>> Error Text:
>> File: 9
>> Line: ae0
>> Error Data is in record data.
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>> Data:
>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>> 0010: 00 00 00 03 00 00 00 .......
>> <Meinolf Weber> wrote in message
>> news:ff16fb6698a5c8ca7e5c2d6a05b0@msnews.microsoft.com...
>>
>>> Hello filip,
>>>
>>> If you press the 2 paper button in the right corner of the event
>>> properties you can copy the complete error here. The event No is
>>> missing, so please post the complete event again.
>>>
>>> Also do you really use an RC Release candidate version from 2003?
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> I keep getting the below error over and over again in my server 2003
>>>> rc2
>>>> system event log,
>>>> i have looked up the error and it says that the problem is "your
>>>> Kerberos
>>>> cannot resolve
>>>> a request from another host", but this is the same host, allso that
>>>> the
>>>> couse is time difference,
>>>> how could this be possible if it is the same machine ( Server Name:
>>>> host/credo_exchange.credobanka.hr
>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)
>>>> A Kerberos Error Message was received:
>>>> on logon session
>>>> Client Time:
>>>> Server Time: 10:37:18.0000 5/7/2008 Z
>>>> Error Code: 0xd KDC_ERR_BADOPTION
>>>> Extended Error: 0xc00000bb KLIN(0)
>>>> Client Realm:
>>>> Client Name:
>>>> Server Realm: CREDOBANKA.HR
>>>> Server Name: host/credo_exchange.credobanka.hr
>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>>> Error Text:
>>>> File: 9
>>>> Line: ae0
>>>> Error Data is in record data.
>>>> For more information, see Help and Support Center at
>
>
 
Re: Server Time

found a solution to pinpoint problem
http://www.mail-archive.com/kerberos@mit.edu/msg07865.html

"filip" <fmatosic@inet.hr> wrote in message
news:OmvNjfNsIHA.4716@TK2MSFTNGP06.phx.gbl...
> That dosen't solve my problem, i need to see if there is a problem with
> kerberos ticket handling,
> so looging has to stay on, but i need to see what coused this error. Any
> suggestions
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6698b978ca7eb6a100c3f3@msnews.microsoft.com...
>> Hello filip,
>>
>> CHeck out if kerberos logging is enabled, if yes disable it.
>> http://support.microsoft.com/kb/q262177/
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>
>>> Sorry, i misstyped it is 2003 R2 SP2.
>>> Here is a newer log, but as you asked.
>>> Event Type: Error
>>> Event Source: Kerberos
>>> Event Category: None
>>> Event ID: 3
>>> Date: 7.5.2008
>>> Time: 22:52:44
>>> User: N/A
>>> Computer: CREDO_EXCHANGE
>>> Description:
>>> A Kerberos Error Message was received:
>>> on logon session
>>> Client Time:
>>> Server Time: 20:52:44.0000 5/7/2008 Z
>>> Error Code: 0xd KDC_ERR_BADOPTION
>>> Extended Error: 0xc00000bb KLIN(0)
>>> Client Realm:
>>> Client Name:
>>> Server Realm: CREDOBANKA.HR
>>> Server Name: host/credo_exchange.credobanka.hr
>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>> Error Text:
>>> File: 9
>>> Line: ae0
>>> Error Data is in record data.
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> Data:
>>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>>> 0010: 00 00 00 03 00 00 00 .......
>>> <Meinolf Weber> wrote in message
>>> news:ff16fb6698a5c8ca7e5c2d6a05b0@msnews.microsoft.com...
>>>
>>>> Hello filip,
>>>>
>>>> If you press the 2 paper button in the right corner of the event
>>>> properties you can copy the complete error here. The event No is
>>>> missing, so please post the complete event again.
>>>>
>>>> Also do you really use an RC Release candidate version from 2003?
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> I keep getting the below error over and over again in my server 2003
>>>>> rc2
>>>>> system event log,
>>>>> i have looked up the error and it says that the problem is "your
>>>>> Kerberos
>>>>> cannot resolve
>>>>> a request from another host", but this is the same host, allso that
>>>>> the
>>>>> couse is time difference,
>>>>> how could this be possible if it is the same machine ( Server Name:
>>>>> host/credo_exchange.credobanka.hr
>>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR)
>>>>> A Kerberos Error Message was received:
>>>>> on logon session
>>>>> Client Time:
>>>>> Server Time: 10:37:18.0000 5/7/2008 Z
>>>>> Error Code: 0xd KDC_ERR_BADOPTION
>>>>> Extended Error: 0xc00000bb KLIN(0)
>>>>> Client Realm:
>>>>> Client Name:
>>>>> Server Realm: CREDOBANKA.HR
>>>>> Server Name: host/credo_exchange.credobanka.hr
>>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>>>> Error Text:
>>>>> File: 9
>>>>> Line: ae0
>>>>> Error Data is in record data.
>>>>> For more information, see Help and Support Center at
>>
>>
>
>
 
Re: Server Time

i found that a server on our network is in need of an account reset, but
the time on the server is just few minutes apart from the main DC where i
found the logs,
so i'm still wondering as the log shows the time difference is 2 hours. Our
time zone is currently 2 hours from GMT (UMT), is it something to do with
this?

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
> Hello filip,
>
> So this also works for you?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>
>
>
 
Re: Server Time

Hello filip,

In a domain any machine has to be the same time provided from the PDCEmulator,
where all DC's sync with and the member servers and clients sync with one
of the available DC's.
So try to resync the time with the domain first:

w32tm /config /syncfromflags:domhier /update

After that run:

net stop w32time

net start w32time


Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> i found that a server on our network is in need of an account reset,
> but
> the time on the server is just few minutes apart from the main DC
> where i
> found the logs,
> so i'm still wondering as the log shows the time difference is 2
> hours. Our
> time zone is currently 2 hours from GMT (UMT), is it something to do
> with
> this?
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>
>> Hello filip,
>>
>> So this also works for you?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>
 
Re: Server Time

This say's that all "clients" have to be the same time, but in my log (pls
read comments i n the log)


Date: 8.5.2008
Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
Computer: CREDO_EXCHANGE
Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS THIS
is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is the
DC allso the same server the log was created on, namde CREDO_EXCHANGE

Error Code: 0xd KDC_ERR_BADOPTION
Extended Error: 0xc00000bb KLIN(0)
Client Realm:
Client Name:
Server Realm: CREDOBANKA.HR
Server Name: host/credo_exchange.credobanka.hr
Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
Error Text:
File: 9
Line: ae0
Error Data is in record data.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 30 15 a1 03 02 01 03 a2 0.!....c
0008: 0e 04 0c bb 00 00 c0 00 .....A.
0010: 00 00 00 03 00 00 00 .......

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
> Hello filip,
>
> In a domain any machine has to be the same time provided from the
> PDCEmulator, where all DC's sync with and the member servers and clients
> sync with one of the available DC's.
> So try to resync the time with the domain first:
>
> w32tm /config /syncfromflags:domhier /update
>
> After that run:
>
> net stop w32time
>
> net start w32time
>
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> i found that a server on our network is in need of an account reset,
>> but
>> the time on the server is just few minutes apart from the main DC
>> where i
>> found the logs,
>> so i'm still wondering as the log shows the time difference is 2
>> hours. Our
>> time zone is currently 2 hours from GMT (UMT), is it something to do
>> with
>> this?
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>
>>> Hello filip,
>>>
>>> So this also works for you?
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>
>
>
 
Re: Server Time

Hello filip,

Is the time zone different from the DC's?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> This say's that all "clients" have to be the same time, but in my log
> (pls read comments i n the log)
>
> Date: 8.5.2008
> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
> Computer: CREDO_EXCHANGE
> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
> THIS
> is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is
> the
> DC allso the same server the log was created on, namde CREDO_EXCHANGE
>
> Error Code: 0xd KDC_ERR_BADOPTION
> Extended Error: 0xc00000bb KLIN(0)
> Client Realm:
> Client Name:
> Server Realm: CREDOBANKA.HR
> Server Name: host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
> Error Text:
> File: 9
> Line: ae0
> Error Data is in record data.
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
> 0010: 00 00 00 03 00 00 00 .......
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>
>> Hello filip,
>>
>> In a domain any machine has to be the same time provided from the
>> PDCEmulator, where all DC's sync with and the member servers and
>> clients
>> sync with one of the available DC's.
>> So try to resync the time with the domain first:
>> w32tm /config /syncfromflags:domhier /update
>>
>> After that run:
>>
>> net stop w32time
>>
>> net start w32time
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> i found that a server on our network is in need of an account
>>> reset,
>>> but
>>> the time on the server is just few minutes apart from the main DC
>>> where i
>>> found the logs,
>>> so i'm still wondering as the log shows the time difference is 2
>>> hours. Our
>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>> with
>>> this?
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>> Hello filip,
>>>>
>>>> So this also works for you?
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>
 
Re: Server Time

Hello filip,

Also have a look on this:
http://www.eventid.net/display.asp?eventid=3&eventno=3536&source=Kerberos&phase=1

http://forums.techarena.in/showthread.php?t=594864

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> This say's that all "clients" have to be the same time, but in my log
> (pls read comments i n the log)
>
> Date: 8.5.2008
> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
> Computer: CREDO_EXCHANGE
> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
> THIS
> is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is
> the
> DC allso the same server the log was created on, namde CREDO_EXCHANGE
>
> Error Code: 0xd KDC_ERR_BADOPTION
> Extended Error: 0xc00000bb KLIN(0)
> Client Realm:
> Client Name:
> Server Realm: CREDOBANKA.HR
> Server Name: host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
> Error Text:
> File: 9
> Line: ae0
> Error Data is in record data.
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
> 0010: 00 00 00 03 00 00 00 .......
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>
>> Hello filip,
>>
>> In a domain any machine has to be the same time provided from the
>> PDCEmulator, where all DC's sync with and the member servers and
>> clients
>> sync with one of the available DC's.
>> So try to resync the time with the domain first:
>> w32tm /config /syncfromflags:domhier /update
>>
>> After that run:
>>
>> net stop w32time
>>
>> net start w32time
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> i found that a server on our network is in need of an account
>>> reset,
>>> but
>>> the time on the server is just few minutes apart from the main DC
>>> where i
>>> found the logs,
>>> so i'm still wondering as the log shows the time difference is 2
>>> hours. Our
>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>> with
>>> this?
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>> Hello filip,
>>>>
>>>> So this also works for you?
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>
 
Re: Server Time

No, all the servers are here in our building, and all of them (looking in
the task bar)have the same time, so i'm puzzled where dose the time from the
log come from?
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6698c5e8ca7f1e3b609db0@msnews.microsoft.com...
> Hello filip,
>
> Is the time zone different from the DC's?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> This say's that all "clients" have to be the same time, but in my log
>> (pls read comments i n the log)
>>
>> Date: 8.5.2008
>> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
>> Computer: CREDO_EXCHANGE
>> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
>> THIS
>> is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is
>> the
>> DC allso the same server the log was created on, namde CREDO_EXCHANGE
>>
>> Error Code: 0xd KDC_ERR_BADOPTION
>> Extended Error: 0xc00000bb KLIN(0)
>> Client Realm:
>> Client Name:
>> Server Realm: CREDOBANKA.HR
>> Server Name: host/credo_exchange.credobanka.hr
>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>> Error Text:
>> File: 9
>> Line: ae0
>> Error Data is in record data.
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>> Data:
>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>> 0010: 00 00 00 03 00 00 00 .......
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>>
>>> Hello filip,
>>>
>>> In a domain any machine has to be the same time provided from the
>>> PDCEmulator, where all DC's sync with and the member servers and
>>> clients
>>> sync with one of the available DC's.
>>> So try to resync the time with the domain first:
>>> w32tm /config /syncfromflags:domhier /update
>>>
>>> After that run:
>>>
>>> net stop w32time
>>>
>>> net start w32time
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> i found that a server on our network is in need of an account
>>>> reset,
>>>> but
>>>> the time on the server is just few minutes apart from the main DC
>>>> where i
>>>> found the logs,
>>>> so i'm still wondering as the log shows the time difference is 2
>>>> hours. Our
>>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>>> with
>>>> this?
>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>>> Hello filip,
>>>>>
>>>>> So this also works for you?
>>>>>
>>>>> Best regards
>>>>>
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>> and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>>
>
>
 
Re: Server Time

Time: is as on recording machine when recording the event
Server Time: is time on Server Name:
They differ by your UTC +2 zone (i.e. one shown GMT)


"filip" <fmatosic@inet.hr> wrote in message
news:urWjHAPsIHA.4848@TK2MSFTNGP05.phx.gbl...
> This say's that all "clients" have to be the same time, but in my log (pls
> read comments i n the log)
>
>
> Date: 8.5.2008
> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
> Computer: CREDO_EXCHANGE
> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS THIS
> is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is the
> DC allso the same server the log was created on, namde CREDO_EXCHANGE
>
> Error Code: 0xd KDC_ERR_BADOPTION
> Extended Error: 0xc00000bb KLIN(0)
> Client Realm:
> Client Name:
> Server Realm: CREDOBANKA.HR
> Server Name: host/credo_exchange.credobanka.hr
> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
> Error Text:
> File: 9
> Line: ae0
> Error Data is in record data.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
> 0010: 00 00 00 03 00 00 00 .......
>
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>> Hello filip,
>>
>> In a domain any machine has to be the same time provided from the
>> PDCEmulator, where all DC's sync with and the member servers and clients
>> sync with one of the available DC's.
>> So try to resync the time with the domain first:
>>
>> w32tm /config /syncfromflags:domhier /update
>>
>> After that run:
>>
>> net stop w32time
>>
>> net start w32time
>>
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>
>>> i found that a server on our network is in need of an account reset,
>>> but
>>> the time on the server is just few minutes apart from the main DC
>>> where i
>>> found the logs,
>>> so i'm still wondering as the log shows the time difference is 2
>>> hours. Our
>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>> with
>>> this?
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>
>>>> Hello filip,
>>>>
>>>> So this also works for you?
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>
>>
>>
>
>
 
Re: Server Time

But how is possible that the same computer shows different times,
as the event is recorded ancredo_exchange and Server Time is on Credo
exchange, how is this possible?




"Roger Abell [MVP]" <mvpNoSpam@asu.edu> wrote in message
news:eLnffdmsIHA.5096@TK2MSFTNGP02.phx.gbl...
> Time: is as on recording machine when recording the event
> Server Time: is time on Server Name:
> They differ by your UTC +2 zone (i.e. one shown GMT)
>
>
> "filip" <fmatosic@inet.hr> wrote in message
> news:urWjHAPsIHA.4848@TK2MSFTNGP05.phx.gbl...
>> This say's that all "clients" have to be the same time, but in my log
>> (pls read comments i n the log)
>>
>>
>> Date: 8.5.2008
>> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
>> Computer: CREDO_EXCHANGE
>> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS THIS
>> is it :Server Name: host/credo_exchange.credobanka.hr, becouse this is
>> the DC allso the same server the log was created on, namde CREDO_EXCHANGE
>>
>> Error Code: 0xd KDC_ERR_BADOPTION
>> Extended Error: 0xc00000bb KLIN(0)
>> Client Realm:
>> Client Name:
>> Server Realm: CREDOBANKA.HR
>> Server Name: host/credo_exchange.credobanka.hr
>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>> Error Text:
>> File: 9
>> Line: ae0
>> Error Data is in record data.
>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>> Data:
>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>> 0010: 00 00 00 03 00 00 00 .......
>>
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>>> Hello filip,
>>>
>>> In a domain any machine has to be the same time provided from the
>>> PDCEmulator, where all DC's sync with and the member servers and clients
>>> sync with one of the available DC's.
>>> So try to resync the time with the domain first:
>>>
>>> w32tm /config /syncfromflags:domhier /update
>>>
>>> After that run:
>>>
>>> net stop w32time
>>>
>>> net start w32time
>>>
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>
>>>> i found that a server on our network is in need of an account reset,
>>>> but
>>>> the time on the server is just few minutes apart from the main DC
>>>> where i
>>>> found the logs,
>>>> so i'm still wondering as the log shows the time difference is 2
>>>> hours. Our
>>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>>> with
>>>> this?
>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>>
>>>>> Hello filip,
>>>>>
>>>>> So this also works for you?
>>>>>
>>>>> Best regards
>>>>>
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>>
>>>
>>>
>>
>>
>
>
 
Re: Server Time

I think what Roger was trying to explain was that the two different time
values represent the same time, one being local to your timezone, the other
being relative to "Universal Coordinated Time" or GMT ("Greenwich Mean
Time").

Because domains can typically span time zones, much of the time information
contained on them is maintained independent of what the local time zone
happens to be, attributes like lastlogondate, for example. If done
otherwise, time calculations would become overly complex. But when I logon
to the nearest domain controller and type the DATE command, it shows me the
time relative to the local time zone.

/Al


"filip" <fmatosic@@inet.hr> wrote in message
news:%239uUy3tsIHA.5268@TK2MSFTNGP06.phx.gbl...
> But how is possible that the same computer shows different times,
> as the event is recorded ancredo_exchange and Server Time is on Credo
> exchange, how is this possible?
>
>
>
>
> "Roger Abell [MVP]" <mvpNoSpam@asu.edu> wrote in message
> news:eLnffdmsIHA.5096@TK2MSFTNGP02.phx.gbl...
>> Time: is as on recording machine when recording the event
>> Server Time: is time on Server Name:
>> They differ by your UTC +2 zone (i.e. one shown GMT)
>>
>>
>> "filip" <fmatosic@inet.hr> wrote in message
>> news:urWjHAPsIHA.4848@TK2MSFTNGP05.phx.gbl...
>>> This say's that all "clients" have to be the same time, but in my log
>>> (pls read comments i n the log)
>>>
>>>
>>> Date: 8.5.2008
>>> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
>>> Computer: CREDO_EXCHANGE
>>> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
>>> THIS is it :Server Name: host/credo_exchange.credobanka.hr, becouse this
>>> is the DC allso the same server the log was created on, namde
>>> CREDO_EXCHANGE
>>>
>>> Error Code: 0xd KDC_ERR_BADOPTION
>>> Extended Error: 0xc00000bb KLIN(0)
>>> Client Realm:
>>> Client Name:
>>> Server Realm: CREDOBANKA.HR
>>> Server Name: host/credo_exchange.credobanka.hr
>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>> Error Text:
>>> File: 9
>>> Line: ae0
>>> Error Data is in record data.
>>>
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> Data:
>>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>>> 0010: 00 00 00 03 00 00 00 .......
>>>
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>>>> Hello filip,
>>>>
>>>> In a domain any machine has to be the same time provided from the
>>>> PDCEmulator, where all DC's sync with and the member servers and
>>>> clients sync with one of the available DC's.
>>>> So try to resync the time with the domain first:
>>>>
>>>> w32tm /config /syncfromflags:domhier /update
>>>>
>>>> After that run:
>>>>
>>>> net stop w32time
>>>>
>>>> net start w32time
>>>>
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>
>>>>> i found that a server on our network is in need of an account reset,
>>>>> but
>>>>> the time on the server is just few minutes apart from the main DC
>>>>> where i
>>>>> found the logs,
>>>>> so i'm still wondering as the log shows the time difference is 2
>>>>> hours. Our
>>>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>>>> with
>>>>> this?
>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>>>
>>>>>> Hello filip,
>>>>>>
>>>>>> So this also works for you?
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Meinolf Weber
>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>>>> confers no rights.
>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
 
Re: Server Time

Ok, so i can say that this is not a time difference problem, and still all
information/solution goes to that direction?
"Al Dunbar" <AlanDrub@hotmail.com.nospaam> wrote in message
news:e$r7T24sIHA.2064@TK2MSFTNGP05.phx.gbl...
>I think what Roger was trying to explain was that the two different time
>values represent the same time, one being local to your timezone, the other
>being relative to "Universal Coordinated Time" or GMT ("Greenwich Mean
>Time").
>
> Because domains can typically span time zones, much of the time
> information contained on them is maintained independent of what the local
> time zone happens to be, attributes like lastlogondate, for example. If
> done otherwise, time calculations would become overly complex. But when I
> logon to the nearest domain controller and type the DATE command, it shows
> me the time relative to the local time zone.
>
> /Al
>
>
> "filip" <fmatosic@@inet.hr> wrote in message
> news:%239uUy3tsIHA.5268@TK2MSFTNGP06.phx.gbl...
>> But how is possible that the same computer shows different times,
>> as the event is recorded ancredo_exchange and Server Time is on Credo
>> exchange, how is this possible?
>>
>>
>>
>>
>> "Roger Abell [MVP]" <mvpNoSpam@asu.edu> wrote in message
>> news:eLnffdmsIHA.5096@TK2MSFTNGP02.phx.gbl...
>>> Time: is as on recording machine when recording the event
>>> Server Time: is time on Server Name:
>>> They differ by your UTC +2 zone (i.e. one shown GMT)
>>>
>>>
>>> "filip" <fmatosic@inet.hr> wrote in message
>>> news:urWjHAPsIHA.4848@TK2MSFTNGP05.phx.gbl...
>>>> This say's that all "clients" have to be the same time, but in my log
>>>> (pls read comments i n the log)
>>>>
>>>>
>>>> Date: 8.5.2008
>>>> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
>>>> Computer: CREDO_EXCHANGE
>>>> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
>>>> THIS is it :Server Name: host/credo_exchange.credobanka.hr, becouse
>>>> this is the DC allso the same server the log was created on, namde
>>>> CREDO_EXCHANGE
>>>>
>>>> Error Code: 0xd KDC_ERR_BADOPTION
>>>> Extended Error: 0xc00000bb KLIN(0)
>>>> Client Realm:
>>>> Client Name:
>>>> Server Realm: CREDOBANKA.HR
>>>> Server Name: host/credo_exchange.credobanka.hr
>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>>> Error Text:
>>>> File: 9
>>>> Line: ae0
>>>> Error Data is in record data.
>>>>
>>>> For more information, see Help and Support Center at
>>>> http://go.microsoft.com/fwlink/events.asp.
>>>> Data:
>>>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>>>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>>>> 0010: 00 00 00 03 00 00 00 .......
>>>>
>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>>>>> Hello filip,
>>>>>
>>>>> In a domain any machine has to be the same time provided from the
>>>>> PDCEmulator, where all DC's sync with and the member servers and
>>>>> clients sync with one of the available DC's.
>>>>> So try to resync the time with the domain first:
>>>>>
>>>>> w32tm /config /syncfromflags:domhier /update
>>>>>
>>>>> After that run:
>>>>>
>>>>> net stop w32time
>>>>>
>>>>> net start w32time
>>>>>
>>>>>
>>>>> Best regards
>>>>>
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>
>>>>>> i found that a server on our network is in need of an account reset,
>>>>>> but
>>>>>> the time on the server is just few minutes apart from the main DC
>>>>>> where i
>>>>>> found the logs,
>>>>>> so i'm still wondering as the log shows the time difference is 2
>>>>>> hours. Our
>>>>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>>>>> with
>>>>>> this?
>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>>>>
>>>>>>> Hello filip,
>>>>>>>
>>>>>>> So this also works for you?
>>>>>>>
>>>>>>> Best regards
>>>>>>>
>>>>>>> Meinolf Weber
>>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>>>>> confers no rights.
>>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
 
Re: Server Time

Correct - I do not think that you have a time difference problem. But since
you seem to be in Croatia, I am surprised by the two hour difference, as I
thought Croatia was at UTC+1.

Anyway, here is how I interpret the information you showed below:

>>>>> Date: 8.5.2008
>>>>> Time: 11:38:04

When not qualified, one assumes local time.

>>>>> Server Time: 9:38:4.0000 5/8/2008 Z

the "Z" is highly suggestive of UTC time. I think that, for example, the
whenchanged AD attribute is given in this format:

20080508132259.0Z


/Al

"filip" <fmatosic@@inet.hr> wrote in message
news:uucnvg6sIHA.672@TK2MSFTNGP02.phx.gbl...
> Ok, so i can say that this is not a time difference problem, and still
> all
> information/solution goes to that direction?
> "Al Dunbar" <AlanDrub@hotmail.com.nospaam> wrote in message
> news:e$r7T24sIHA.2064@TK2MSFTNGP05.phx.gbl...
>>I think what Roger was trying to explain was that the two different time
>>values represent the same time, one being local to your timezone, the
>>other being relative to "Universal Coordinated Time" or GMT ("Greenwich
>>Mean Time").
>>
>> Because domains can typically span time zones, much of the time
>> information contained on them is maintained independent of what the local
>> time zone happens to be, attributes like lastlogondate, for example. If
>> done otherwise, time calculations would become overly complex. But when I
>> logon to the nearest domain controller and type the DATE command, it
>> shows me the time relative to the local time zone.
>>
>> /Al
>>
>>
>> "filip" <fmatosic@@inet.hr> wrote in message
>> news:%239uUy3tsIHA.5268@TK2MSFTNGP06.phx.gbl...
>>> But how is possible that the same computer shows different times,
>>> as the event is recorded ancredo_exchange and Server Time is on Credo
>>> exchange, how is this possible?
>>>
>>>
>>>
>>>
>>> "Roger Abell [MVP]" <mvpNoSpam@asu.edu> wrote in message
>>> news:eLnffdmsIHA.5096@TK2MSFTNGP02.phx.gbl...
>>>> Time: is as on recording machine when recording the event
>>>> Server Time: is time on Server Name:
>>>> They differ by your UTC +2 zone (i.e. one shown GMT)
>>>>
>>>>
>>>> "filip" <fmatosic@inet.hr> wrote in message
>>>> news:urWjHAPsIHA.4848@TK2MSFTNGP05.phx.gbl...
>>>>> This say's that all "clients" have to be the same time, but in my log
>>>>> (pls read comments i n the log)
>>>>>
>>>>>
>>>>> Date: 8.5.2008
>>>>> Time: 11:38:04 ----> THE TIME on CREDO_EXCHANGE
>>>>> Computer: CREDO_EXCHANGE
>>>>> Server Time: 9:38:4.0000 5/8/2008 Z ----> WHICH SERVER TIME IS
>>>>> THIS is it :Server Name: host/credo_exchange.credobanka.hr, becouse
>>>>> this is the DC allso the same server the log was created on, namde
>>>>> CREDO_EXCHANGE
>>>>>
>>>>> Error Code: 0xd KDC_ERR_BADOPTION
>>>>> Extended Error: 0xc00000bb KLIN(0)
>>>>> Client Realm:
>>>>> Client Name:
>>>>> Server Realm: CREDOBANKA.HR
>>>>> Server Name: host/credo_exchange.credobanka.hr
>>>>> Target Name: host/credo_exchange.credobanka.hr@CREDOBANKA.HR
>>>>> Error Text:
>>>>> File: 9
>>>>> Line: ae0
>>>>> Error Data is in record data.
>>>>>
>>>>> For more information, see Help and Support Center at
>>>>> http://go.microsoft.com/fwlink/events.asp.
>>>>> Data:
>>>>> 0000: 30 15 a1 03 02 01 03 a2 0.!....c
>>>>> 0008: 0e 04 0c bb 00 00 c0 00 .....A.
>>>>> 0010: 00 00 00 03 00 00 00 .......
>>>>>
>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>> news:ff16fb6698c528ca7f13a1405b17@msnews.microsoft.com...
>>>>>> Hello filip,
>>>>>>
>>>>>> In a domain any machine has to be the same time provided from the
>>>>>> PDCEmulator, where all DC's sync with and the member servers and
>>>>>> clients sync with one of the available DC's.
>>>>>> So try to resync the time with the domain first:
>>>>>>
>>>>>> w32tm /config /syncfromflags:domhier /update
>>>>>>
>>>>>> After that run:
>>>>>>
>>>>>> net stop w32time
>>>>>>
>>>>>> net start w32time
>>>>>>
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Meinolf Weber
>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>>>>> confers no rights.
>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>
>>>>>>> i found that a server on our network is in need of an account
>>>>>>> reset,
>>>>>>> but
>>>>>>> the time on the server is just few minutes apart from the main DC
>>>>>>> where i
>>>>>>> found the logs,
>>>>>>> so i'm still wondering as the log shows the time difference is 2
>>>>>>> hours. Our
>>>>>>> time zone is currently 2 hours from GMT (UMT), is it something to do
>>>>>>> with
>>>>>>> this?
>>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>>>> news:ff16fb6698c2c8ca7f07e939f27f@msnews.microsoft.com...
>>>>>>>
>>>>>>>> Hello filip,
>>>>>>>>
>>>>>>>> So this also works for you?
>>>>>>>>
>>>>>>>> Best regards
>>>>>>>>
>>>>>>>> Meinolf Weber
>>>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>>>>> and
>>>>>>>> confers no rights.
>>>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>>>> http://www.mail-archive.com/kerberos@mit.edu/msg07865.html
>>>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
 
Back
Top