Virtual Server 2005 R2 SP1 setup error

  • Thread starter Thread starter Ilya Sazonov
  • Start date Start date
I

Ilya Sazonov

Guest
1. HP DL380 with teamed adapter
2. Windows 2003 R2 SP2
3. Setup Virtual Server 2005 R2 SP1

and i get errors (up to 4) in System event log:

Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10016
Date: 21.05.2008
Time: 9:08:31
User: NT AUTHORITY\SYSTEM
Computer: VS1
Description:
The application-specific permission settings do not grant Local Launch
permission for the COM Server application with CLSID
{DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT AUTHORITY\SYSTEM SID
(S-1-5-18). This security permission can be modified using the Component
Services administrative tool.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
__________________________________

Result: VS is working but network do not work in Virtual machines (no pings)!

(I check DCOM security permissions for "Virtual Server" with another good
server and it indentical.)

I assume, that setup gives the error because of DCOM permission restrictions
for SYSTEM account entered by SP2.

Any offers?
 
Re: Virtual Server 2005 R2 SP1 setup error

Hello Ilya,

Check out this one, even it is for SP1:
http://support.microsoft.com/kb/931355

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> 1. HP DL380 with teamed adapter
> 2. Windows 2003 R2 SP2
> 3. Setup Virtual Server 2005 R2 SP1
> and i get errors (up to 4) in System event log:
>
> Event Type: Error
> Event Source: DCOM
> Event Category: None
> Event ID: 10016
> Date: 21.05.2008
> Time: 9:08:31
> User: NT AUTHORITY\SYSTEM
> Computer: VS1
> Description:
> The application-specific permission settings do not grant Local Launch
> permission for the COM Server application with CLSID
> {DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT
> AUTHORITY\SYSTEM SID
> (S-1-5-18). This security permission can be modified using the
> Component
> Services administrative tool.
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> __________________________________
>
> Result: VS is working but network do not work in Virtual machines (no
> pings)!
>
> (I check DCOM security permissions for "Virtual Server" with another
> good server and it indentical.)
>
> I assume, that setup gives the error because of DCOM permission
> restrictions for SYSTEM account entered by SP2.
>
> Any offers?
>
 
Re: Virtual Server 2005 R2 SP1 setup error

Thanks for reply!

As the error arises during installation I cannot set the right permission to
not existing object (DCOM "Virtual Server" by means of dcomcnfg) in advance.

It is possibly necessary to change the default DCOM permissions for SYSTEM
account...


"Meinolf Weber" wrote:

> Hello Ilya,
>
> Check out this one, even it is for SP1:
> http://support.microsoft.com/kb/931355
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > 1. HP DL380 with teamed adapter
> > 2. Windows 2003 R2 SP2
> > 3. Setup Virtual Server 2005 R2 SP1
> > and i get errors (up to 4) in System event log:
> >
> > Event Type: Error
> > Event Source: DCOM
> > Event Category: None
> > Event ID: 10016
> > Date: 21.05.2008
> > Time: 9:08:31
> > User: NT AUTHORITY\SYSTEM
> > Computer: VS1
> > Description:
> > The application-specific permission settings do not grant Local Launch
> > permission for the COM Server application with CLSID
> > {DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT
> > AUTHORITY\SYSTEM SID
> > (S-1-5-18). This security permission can be modified using the
> > Component
> > Services administrative tool.
> > For more information, see Help and Support Center at
> > http://go.microsoft.com/fwlink/events.asp.
> > __________________________________
> >
> > Result: VS is working but network do not work in Virtual machines (no
> > pings)!
> >
> > (I check DCOM security permissions for "Virtual Server" with another
> > good server and it indentical.)
> >
> > I assume, that setup gives the error because of DCOM permission
> > restrictions for SYSTEM account entered by SP2.
> >
> > Any offers?
> >
>
>
>
 
Re: Virtual Server 2005 R2 SP1 setup error

Hello Ilya,

You wrote Virtual server is working, when i understand you correct?

Also have a look here:
http://blogs.sqlxml.org/bryantlikes/archive/2004/07/01/759.aspx

http://windowsitpro.com/article/art...o-connect-to-the-administration-web-site.html

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Thanks for reply!
>
> As the error arises during installation I cannot set the right
> permission to not existing object (DCOM "Virtual Server" by means of
> dcomcnfg) in advance.
>
> It is possibly necessary to change the default DCOM permissions for
> SYSTEM account...
>
> "Meinolf Weber" wrote:
>
>> Hello Ilya,
>>
>> Check out this one, even it is for SP1:
>> http://support.microsoft.com/kb/931355
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> 1. HP DL380 with teamed adapter
>>> 2. Windows 2003 R2 SP2
>>> 3. Setup Virtual Server 2005 R2 SP1
>>> and i get errors (up to 4) in System event log:
>>> Event Type: Error
>>> Event Source: DCOM
>>> Event Category: None
>>> Event ID: 10016
>>> Date: 21.05.2008
>>> Time: 9:08:31
>>> User: NT AUTHORITY\SYSTEM
>>> Computer: VS1
>>> Description:
>>> The application-specific permission settings do not grant Local
>>> Launch
>>> permission for the COM Server application with CLSID
>>> {DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT
>>> AUTHORITY\SYSTEM SID
>>> (S-1-5-18). This security permission can be modified using the
>>> Component
>>> Services administrative tool.
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> __________________________________
>>> Result: VS is working but network do not work in Virtual machines
>>> (no pings)!
>>>
>>> (I check DCOM security permissions for "Virtual Server" with another
>>> good server and it indentical.)
>>>
>>> I assume, that setup gives the error because of DCOM permission
>>> restrictions for SYSTEM account entered by SP2.
>>>
>>> Any offers?
>>>
 
Re: Virtual Server 2005 R2 SP1 setup error

Thans for help!

Now i resolve the error (id 10016) by add SYSTEM account in "Distributed COM
Users" group. Setup now passes without errors.

But main problem has remained! VMs not have ping throu external network
adapter.
As I mentioned my server is HP DL380 with teamed adapter.
Had somebody a similar situation?


"Meinolf Weber" wrote:

> Hello Ilya,
>
> You wrote Virtual server is working, when i understand you correct?
>
> Also have a look here:
> http://blogs.sqlxml.org/bryantlikes/archive/2004/07/01/759.aspx
>
> http://windowsitpro.com/article/art...o-connect-to-the-administration-web-site.html
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > Thanks for reply!
> >
> > As the error arises during installation I cannot set the right
> > permission to not existing object (DCOM "Virtual Server" by means of
> > dcomcnfg) in advance.
> >
> > It is possibly necessary to change the default DCOM permissions for
> > SYSTEM account...
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello Ilya,
> >>
> >> Check out this one, even it is for SP1:
> >> http://support.microsoft.com/kb/931355
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> 1. HP DL380 with teamed adapter
> >>> 2. Windows 2003 R2 SP2
> >>> 3. Setup Virtual Server 2005 R2 SP1
> >>> and i get errors (up to 4) in System event log:
> >>> Event Type: Error
> >>> Event Source: DCOM
> >>> Event Category: None
> >>> Event ID: 10016
> >>> Date: 21.05.2008
> >>> Time: 9:08:31
> >>> User: NT AUTHORITY\SYSTEM
> >>> Computer: VS1
> >>> Description:
> >>> The application-specific permission settings do not grant Local
> >>> Launch
> >>> permission for the COM Server application with CLSID
> >>> {DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT
> >>> AUTHORITY\SYSTEM SID
> >>> (S-1-5-18). This security permission can be modified using the
> >>> Component
> >>> Services administrative tool.
> >>> For more information, see Help and Support Center at
> >>> http://go.microsoft.com/fwlink/events.asp.
> >>> __________________________________
> >>> Result: VS is working but network do not work in Virtual machines
> >>> (no pings)!
> >>>
> >>> (I check DCOM security permissions for "Virtual Server" with another
> >>> good server and it indentical.)
> >>>
> >>> I assume, that setup gives the error because of DCOM permission
> >>> restrictions for SYSTEM account entered by SP2.
> >>>
> >>> Any offers?
> >>>
>
>
>
 
Re: Virtual Server 2005 R2 SP1 setup error

Hello Ilya,

Did you setup your NIC's in Virtual server manager?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Thans for help!
>
> Now i resolve the error (id 10016) by add SYSTEM account in
> "Distributed COM Users" group. Setup now passes without errors.
>
> But main problem has remained! VMs not have ping throu external
> network
> adapter.
> As I mentioned my server is HP DL380 with teamed adapter.
> Had somebody a similar situation?
> "Meinolf Weber" wrote:
>
>> Hello Ilya,
>>
>> You wrote Virtual server is working, when i understand you correct?
>>
>> Also have a look here:
>> http://blogs.sqlxml.org/bryantlikes/archive/2004/07/01/759.aspx
>> http://windowsitpro.com/article/articleid/83135/jsi-tip-9108-when-you
>> -run-virtual-server-2005-on-windows-server-2003-sp1-or-on-windows-xp-
>> sp2-you-receive-access-denied-when-you-attempt-to-connect-to-the-admi
>> nistration-web-site.html
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Thanks for reply!
>>>
>>> As the error arises during installation I cannot set the right
>>> permission to not existing object (DCOM "Virtual Server" by means of
>>> dcomcnfg) in advance.
>>>
>>> It is possibly necessary to change the default DCOM permissions for
>>> SYSTEM account...
>>>
>>> "Meinolf Weber" wrote:
>>>
>>>> Hello Ilya,
>>>>
>>>> Check out this one, even it is for SP1:
>>>> http://support.microsoft.com/kb/931355
>>>> Best regards
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers
>>>> no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> 1. HP DL380 with teamed adapter
>>>>> 2. Windows 2003 R2 SP2
>>>>> 3. Setup Virtual Server 2005 R2 SP1
>>>>> and i get errors (up to 4) in System event log:
>>>>> Event Type: Error
>>>>> Event Source: DCOM
>>>>> Event Category: None
>>>>> Event ID: 10016
>>>>> Date: 21.05.2008
>>>>> Time: 9:08:31
>>>>> User: NT AUTHORITY\SYSTEM
>>>>> Computer: VS1
>>>>> Description:
>>>>> The application-specific permission settings do not grant Local
>>>>> Launch
>>>>> permission for the COM Server application with CLSID
>>>>> {DA3111BC-1BD7-4884-A535-8470D36028F7} to the user NT
>>>>> AUTHORITY\SYSTEM SID
>>>>> (S-1-5-18). This security permission can be modified using the
>>>>> Component
>>>>> Services administrative tool.
>>>>> For more information, see Help and Support Center at
>>>>> http://go.microsoft.com/fwlink/events.asp.
>>>>> __________________________________
>>>>> Result: VS is working but network do not work in Virtual machines
>>>>> (no pings)!
>>>>> (I check DCOM security permissions for "Virtual Server" with
>>>>> another good server and it indentical.)
>>>>>
>>>>> I assume, that setup gives the error because of DCOM permission
>>>>> restrictions for SYSTEM account entered by SP2.
>>>>>
>>>>> Any offers?
>>>>>
 
Re: Virtual Server 2005 R2 SP1 setup error

Hello,

Based on some research, I found that this network connectivity problem may
be caused by the team adapters. Ioannis shared some information on how to
resolve this in the following article, hope this can help:

http://www.aspdeveloper.net/Virtual_Server_2005/rn-738-13575_Solution_to_Bro
adcom_Adapter_Teaming_Issue.aspx
Besides, you may need to contact the hardware manufacturer for more details
on this. Please take a look at the following article for more detailed
information on this:

Network adapter teaming and server clustering:
http://support.microsoft.com/kb/254101

Additionally, you can send the Virtual Server related questions in our
Virtual Server newsgroup, so that members who regularly use the newsgroup
can share some information with you:

http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=micros
oft.public.virtualserver

Thank you for your understanding.

Sincerely,
George Yin
Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
 
Re: Virtual Server 2005 R2 SP1 setup error

Hello,

How's everything going?

I'm wondering if the suggestion has helped or if you have any further
questions. Please feel free to respond to the newsgroups if I can assist
further.

Sincerely,
George Yin
Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
 
Back
Top