I assume it's a Vista machine? Then check this all:
-Network Discovery has to be enabled
-You must have a Domain DNS server as primary on the NIC settings, NO internet
DNS servers
-Use the FQDN of the domain to join, like mycompany.com
-The time difference between vista & domain must be < 5 mn
-File Sharing has to be enabled
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> Before I start adding computers to AD do I still need to turn on
> Network Discovery?
>
It's a Win2008 DataCenter (AD DS, and I do have it connected to the
internet, during install it did ask me if I wanted/should create it a a
Delagate, but I didn't, This is my primary Master, the way I can remove it
from the internet is to change the Gateway IP or do I have to reinstall AD
DS?)..., and I will be adding a XP Pro desktop (software Development) and a
Win2000 Labtop.
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
> Hello Eric,
>
> I assume it's a Vista machine? Then check this all:
> -Network Discovery has to be enabled
> -You must have a Domain DNS server as primary on the NIC settings, NO
> internet DNS servers
> -Use the FQDN of the domain to join, like mycompany.com
> -The time difference between vista & domain must be < 5 mn
> -File Sharing has to be enabled
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Before I start adding computers to AD do I still need to turn on
>> Network Discovery?
>>
>
>
On the DC you can use the default settings to connect the clients to the
domain. For the ip configuration please post an unedited ipconfig /all. You
have to use an ip from a private ip range not from the public internal in
the domain. Also clients have to use only domain internal ip's and also DNS
server. On the DC/DNS server you have to setup forwarders to the ISP's DNS
server, so all clients in the domain have internet access if needed.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> It's a Win2008 DataCenter (AD DS, and I do have it connected to the
> internet, during install it did ask me if I wanted/should create it a
> a Delagate, but I didn't, This is my primary Master, the way I can
> remove it from the internet is to change the Gateway IP or do I have
> to reinstall AD DS?)..., and I will be adding a XP Pro desktop
> (software Development) and a Win2000 Labtop.
>
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>
>> Hello Eric,
>>
>> I assume it's a Vista machine? Then check this all:
>> -Network Discovery has to be enabled
>> -You must have a Domain DNS server as primary on the NIC settings, NO
>> internet DNS servers
>> -Use the FQDN of the domain to join, like mycompany.com
>> -The time difference between vista & domain must be < 5 mn
>> -File Sharing has to be enabled
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Before I start adding computers to AD do I still need to turn on
>>> Network Discovery?
>>>
Is there a Webcast and/or Virtual Lab you can link me to that would show how
to setup a small AD DS, Adding Desktop, etc... server?
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
> Hello Eric,
>
> On the DC you can use the default settings to connect the clients to the
> domain. For the ip configuration please post an unedited ipconfig /all.
> You have to use an ip from a private ip range not from the public internal
> in the domain. Also clients have to use only domain internal ip's and also
> DNS server. On the DC/DNS server you have to setup forwarders to the ISP's
> DNS server, so all clients in the domain have internet access if needed.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the
>> internet, during install it did ask me if I wanted/should create it a
>> a Delagate, but I didn't, This is my primary Master, the way I can
>> remove it from the internet is to change the Gateway IP or do I have
>> to reinstall AD DS?)..., and I will be adding a XP Pro desktop
>> (software Development) and a Win2000 Labtop.
>>
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>
>>> Hello Eric,
>>>
>>> I assume it's a Vista machine? Then check this all:
>>> -Network Discovery has to be enabled
>>> -You must have a Domain DNS server as primary on the NIC settings, NO
>>> internet DNS servers
>>> -Use the FQDN of the domain to join, like mycompany.com
>>> -The time difference between vista & domain must be < 5 mn
>>> -File Sharing has to be enabled
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> Before I start adding computers to AD do I still need to turn on
>>>> Network Discovery?
>>>>
>
>
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> Is there a Webcast and/or Virtual Lab you can link me to that would
> show how to setup a small AD DS, Adding Desktop, etc... server?
>
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
>
>> Hello Eric,
>>
>> On the DC you can use the default settings to connect the clients to
>> the domain. For the ip configuration please post an unedited ipconfig
>> /all. You have to use an ip from a private ip range not from the
>> public internal in the domain. Also clients have to use only domain
>> internal ip's and also DNS server. On the DC/DNS server you have to
>> setup forwarders to the ISP's DNS server, so all clients in the
>> domain have internet access if needed.
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the
>>> internet, during install it did ask me if I wanted/should create it
>>> a a Delagate, but I didn't, This is my primary Master, the way I
>>> can remove it from the internet is to change the Gateway IP or do I
>>> have to reinstall AD DS?)..., and I will be adding a XP Pro desktop
>>> (software Development) and a Win2000 Labtop.
>>>
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>>
>>>> Hello Eric,
>>>>
>>>> I assume it's a Vista machine? Then check this all:
>>>> -Network Discovery has to be enabled
>>>> -You must have a Domain DNS server as primary on the NIC settings,
>>>> NO
>>>> internet DNS servers
>>>> -Use the FQDN of the domain to join, like mycompany.com
>>>> -The time difference between vista & domain must be < 5 mn
>>>> -File Sharing has to be enabled
>>>> Best regards
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> Before I start adding computers to AD do I still need to turn on
>>>>> Network Discovery?
>>>>>
while I got you here, I tried to add my WinXP Pro to my domain and I get the
access is denied.
Win2008 Data Center NIC is configured:
IPv4
IP 192.168.0.102
subnet 255..............
D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire Hub
for the internet)
Perf DNS Server 127.0.0.1
WinXP Pro NIC is configured:
IP 192.168.0.101
subnet 255..............
D Gatway 19.168.0.1
Perf DNS Sever 192.168.0.1
I know this is wrong, but could you reconfigure this to how is should look?
I would appreciate it..
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...
> Hello Eric,
>
> Maybe here:
> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx
>
> Also look here:
> https://www.microsoft.com/downloads...0c-fa3e-4f6a-97f5-acaf31de6dce&displaylang=en
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Is there a Webcast and/or Virtual Lab you can link me to that would
>> show how to setup a small AD DS, Adding Desktop, etc... server?
>>
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
>>
>>> Hello Eric,
>>>
>>> On the DC you can use the default settings to connect the clients to
>>> the domain. For the ip configuration please post an unedited ipconfig
>>> /all. You have to use an ip from a private ip range not from the
>>> public internal in the domain. Also clients have to use only domain
>>> internal ip's and also DNS server. On the DC/DNS server you have to
>>> setup forwarders to the ISP's DNS server, so all clients in the
>>> domain have internet access if needed.
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to the
>>>> internet, during install it did ask me if I wanted/should create it
>>>> a a Delagate, but I didn't, This is my primary Master, the way I
>>>> can remove it from the internet is to change the Gateway IP or do I
>>>> have to reinstall AD DS?)..., and I will be adding a XP Pro desktop
>>>> (software Development) and a Win2000 Labtop.
>>>>
>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>>>
>>>>> Hello Eric,
>>>>>
>>>>> I assume it's a Vista machine? Then check this all:
>>>>> -Network Discovery has to be enabled
>>>>> -You must have a Domain DNS server as primary on the NIC settings,
>>>>> NO
>>>>> internet DNS servers
>>>>> -Use the FQDN of the domain to join, like mycompany.com
>>>>> -The time difference between vista & domain must be < 5 mn
>>>>> -File Sharing has to be enabled
>>>>> Best regards
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>> and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>> Before I start adding computers to AD do I still need to turn on
>>>>>> Network Discovery?
>>>>>>
>
>
ip 192.168.0.102
sm 255.......
dg 192.168.0.1
dns 192.168.0.102
Client:
ip 192.168.0.101
sm 255.......
dg 192.168.0.1
dns 192.168.0.102
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> Thanks Weber!...
>
> while I got you here, I tried to add my WinXP Pro to my domain and I
> get the access is denied.
>
> Win2008 Data Center NIC is configured:
> IPv4
> IP 192.168.0.102
> subnet 255..............
> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire
> Hub
> for the internet)
> Perf DNS Server 127.0.0.1
> WinXP Pro NIC is configured:
> IP 192.168.0.101
> subnet 255..............
> D Gatway 19.168.0.1
> Perf DNS Sever 192.168.0.1
> I know this is wrong, but could you reconfigure this to how is should
> look? I would appreciate it..
>
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...
>
>> Hello Eric,
>>
>> Maybe here:
>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx
>> Also look here:
>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa
>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Is there a Webcast and/or Virtual Lab you can link me to that would
>>> show how to setup a small AD DS, Adding Desktop, etc... server?
>>>
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
>>>
>>>> Hello Eric,
>>>>
>>>> On the DC you can use the default settings to connect the clients
>>>> to the domain. For the ip configuration please post an unedited
>>>> ipconfig /all. You have to use an ip from a private ip range not
>>>> from the public internal in the domain. Also clients have to use
>>>> only domain internal ip's and also DNS server. On the DC/DNS server
>>>> you have to setup forwarders to the ISP's DNS server, so all
>>>> clients in the domain have internet access if needed.
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to
>>>>> the internet, during install it did ask me if I wanted/should
>>>>> create it a a Delagate, but I didn't, This is my primary Master,
>>>>> the way I can remove it from the internet is to change the Gateway
>>>>> IP or do I have to reinstall AD DS?)..., and I will be adding a XP
>>>>> Pro desktop (software Development) and a Win2000 Labtop.
>>>>>
>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>>>>
>>>>>> Hello Eric,
>>>>>>
>>>>>> I assume it's a Vista machine? Then check this all:
>>>>>> -Network Discovery has to be enabled
>>>>>> -You must have a Domain DNS server as primary on the NIC
>>>>>> settings,
>>>>>> NO
>>>>>> internet DNS servers
>>>>>> -Use the FQDN of the domain to join, like mycompany.com
>>>>>> -The time difference between vista & domain must be < 5 mn
>>>>>> -File Sharing has to be enabled
>>>>>> Best regards
>>>>>> Meinolf Weber
>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>>> and
>>>>>> confers no rights.
>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>> ** HELP us help YOU!!!
>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>> Before I start adding computers to AD do I still need to turn on
>>>>>>> Network Discovery?
>>>>>>>
I also was using the wrong user to add the XP, I was using a non-admin.
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb669e89c8ca9250a0b918a0@msnews.microsoft.com...
> Hello Eric,
>
> Server:
>
> ip 192.168.0.102
> sm 255.......
> dg 192.168.0.1
> dns 192.168.0.102
>
> Client:
>
> ip 192.168.0.101
> sm 255.......
> dg 192.168.0.1
> dns 192.168.0.102
>
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Thanks Weber!...
>>
>> while I got you here, I tried to add my WinXP Pro to my domain and I
>> get the access is denied.
>>
>> Win2008 Data Center NIC is configured:
>> IPv4
>> IP 192.168.0.102
>> subnet 255..............
>> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire
>> Hub
>> for the internet)
>> Perf DNS Server 127.0.0.1
>> WinXP Pro NIC is configured:
>> IP 192.168.0.101
>> subnet 255..............
>> D Gatway 19.168.0.1
>> Perf DNS Sever 192.168.0.1
>> I know this is wrong, but could you reconfigure this to how is should
>> look? I would appreciate it..
>>
>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...
>>
>>> Hello Eric,
>>>
>>> Maybe here:
>>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx
>>> Also look here:
>>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-fa
>>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> Is there a Webcast and/or Virtual Lab you can link me to that would
>>>> show how to setup a small AD DS, Adding Desktop, etc... server?
>>>>
>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
>>>>
>>>>> Hello Eric,
>>>>>
>>>>> On the DC you can use the default settings to connect the clients
>>>>> to the domain. For the ip configuration please post an unedited
>>>>> ipconfig /all. You have to use an ip from a private ip range not
>>>>> from the public internal in the domain. Also clients have to use
>>>>> only domain internal ip's and also DNS server. On the DC/DNS server
>>>>> you have to setup forwarders to the ISP's DNS server, so all
>>>>> clients in the domain have internet access if needed.
>>>>>
>>>>> Best regards
>>>>>
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>> and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to
>>>>>> the internet, during install it did ask me if I wanted/should
>>>>>> create it a a Delagate, but I didn't, This is my primary Master,
>>>>>> the way I can remove it from the internet is to change the Gateway
>>>>>> IP or do I have to reinstall AD DS?)..., and I will be adding a XP
>>>>>> Pro desktop (software Development) and a Win2000 Labtop.
>>>>>>
>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>>>>>
>>>>>>> Hello Eric,
>>>>>>>
>>>>>>> I assume it's a Vista machine? Then check this all:
>>>>>>> -Network Discovery has to be enabled
>>>>>>> -You must have a Domain DNS server as primary on the NIC
>>>>>>> settings,
>>>>>>> NO
>>>>>>> internet DNS servers
>>>>>>> -Use the FQDN of the domain to join, like mycompany.com
>>>>>>> -The time difference between vista & domain must be < 5 mn
>>>>>>> -File Sharing has to be enabled
>>>>>>> Best regards
>>>>>>> Meinolf Weber
>>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>>>> and
>>>>>>> confers no rights.
>>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>>> ** HELP us help YOU!!!
>>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>>> Before I start adding computers to AD do I still need to turn on
>>>>>>>> Network Discovery?
>>>>>>>>
>
>
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> Awh! Thanks Weber,
>
> I also was using the wrong user to add the XP, I was using a
> non-admin.
>
> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb669e89c8ca9250a0b918a0@msnews.microsoft.com...
>
>> Hello Eric,
>>
>> Server:
>>
>> ip 192.168.0.102
>> sm 255.......
>> dg 192.168.0.1
>> dns 192.168.0.102
>> Client:
>>
>> ip 192.168.0.101
>> sm 255.......
>> dg 192.168.0.1
>> dns 192.168.0.102
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Thanks Weber!...
>>>
>>> while I got you here, I tried to add my WinXP Pro to my domain and I
>>> get the access is denied.
>>>
>>> Win2008 Data Center NIC is configured:
>>> IPv4
>>> IP 192.168.0.102
>>> subnet 255..............
>>> D Gateway 192.168.0.1 (My Dynex Router to a Clear Wire
>>> Hub
>>> for the internet)
>>> Perf DNS Server 127.0.0.1
>>> WinXP Pro NIC is configured:
>>> IP 192.168.0.101
>>> subnet 255..............
>>> D Gatway 19.168.0.1
>>> Perf DNS Sever 192.168.0.1
>>> I know this is wrong, but could you reconfigure this to how is
>>> should
>>> look? I would appreciate it..
>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>> news:ff16fb669e5998ca9159a63e8342@msnews.microsoft.com...
>>>
>>>> Hello Eric,
>>>>
>>>> Maybe here:
>>>> http://www.microsoft.com/events/series/msdnwindowsserver2008.aspx
>>>> Also look here:
>>>> https://www.microsoft.com/downloads/details.aspx?FamilyID=518d870c-
>>>> fa
>>>> 3e-4f6a-97f5-acaf31de6dce&displaylang=en
>>>> Best regards
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> Is there a Webcast and/or Virtual Lab you can link me to that
>>>>> would show how to setup a small AD DS, Adding Desktop, etc...
>>>>> server?
>>>>>
>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>> news:ff16fb669e3388ca909d6e07aaf1@msnews.microsoft.com...
>>>>>
>>>>>> Hello Eric,
>>>>>>
>>>>>> On the DC you can use the default settings to connect the clients
>>>>>> to the domain. For the ip configuration please post an unedited
>>>>>> ipconfig /all. You have to use an ip from a private ip range not
>>>>>> from the public internal in the domain. Also clients have to use
>>>>>> only domain internal ip's and also DNS server. On the DC/DNS
>>>>>> server you have to setup forwarders to the ISP's DNS server, so
>>>>>> all clients in the domain have internet access if needed.
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Meinolf Weber
>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>>> and
>>>>>> confers no rights.
>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>> ** HELP us help YOU!!!
>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>> It's a Win2008 DataCenter (AD DS, and I do have it connected to
>>>>>>> the internet, during install it did ask me if I wanted/should
>>>>>>> create it a a Delagate, but I didn't, This is my primary
>>>>>>> Master, the way I can remove it from the internet is to change
>>>>>>> the Gateway IP or do I have to reinstall AD DS?)..., and I will
>>>>>>> be adding a XP Pro desktop (software Development) and a Win2000
>>>>>>> Labtop.
>>>>>>>
>>>>>>> "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
>>>>>>> news:ff16fb669e19e8ca9040b2e22441@msnews.microsoft.com...
>>>>>>>
>>>>>>>> Hello Eric,
>>>>>>>>
>>>>>>>> I assume it's a Vista machine? Then check this all:
>>>>>>>> -Network Discovery has to be enabled
>>>>>>>> -You must have a Domain DNS server as primary on the NIC
>>>>>>>> settings,
>>>>>>>> NO
>>>>>>>> internet DNS servers
>>>>>>>> -Use the FQDN of the domain to join, like mycompany.com
>>>>>>>> -The time difference between vista & domain must be < 5 mn
>>>>>>>> -File Sharing has to be enabled
>>>>>>>> Best regards
>>>>>>>> Meinolf Weber
>>>>>>>> Disclaimer: This posting is provided "AS IS" with no
>>>>>>>> warranties,
>>>>>>>> and
>>>>>>>> confers no rights.
>>>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>>>> ** HELP us help YOU!!!
>>>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>>>> Before I start adding computers to AD do I still need to turn
>>>>>>>>> on Network Discovery?
>>>>>>>>>
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.