How to setup dual gateways for a single server?

  • Thread starter Thread starter Simon White
  • Start date Start date
S

Simon White

Guest
Hi

I have VPN router (Juniper Networks SSG-5) for VPN traffic and a regular
router for non-vpn traffic. I would like my Win2003 server to forward all IP
traffic destined for 10.144.0.0 to the VPN router and all other destination
to the regular gateway. Can some one tell me how this can be done. The VPN
has to be available 24x7 and is not cannot be something the users must
activate first. It must just be available all the time for applications
trying to communicate with devices in the 10.144.0.0 range.

The VPN exists only between the VPN router and the a CISCO router in Bell
Telephone's data centre.

Thanks,
Simon
 
Re: How to setup dual gateways for a single server?


"Simon White" <SimonWhite@discussions.microsoft.com> wrote in message
news:2FD4F514-DD31-4390-858C-361CFDC9C334@microsoft.com...
> Hi
>
> I have VPN router (Juniper Networks SSG-5) for VPN traffic and a regular
> router for non-vpn traffic. I would like my Win2003 server to forward all
> IP
> traffic destined for 10.144.0.0 to the VPN router and all other
> destination
> to the regular gateway. Can some one tell me how this can be done. The
> VPN
> has to be available 24x7 and is not cannot be something the users must
> activate first. It must just be available all the time for applications
> trying to communicate with devices in the 10.144.0.0 range.
>
> The VPN exists only between the VPN router and the a CISCO router in Bell
> Telephone's data centre.
>
> Thanks,
> Simon

Set the default gateway of the server to the IP address of the Internet
gateway. Then add a static route to send traffic for 10.144.0.0 to the LAN
IP of the VPN server.

route add -p 10.144.0.0 mask 255.255.0.0 <IP address of VPN router>
 
Back
Top