Re: Slow Down the CPU Speed
On Fri, 20 Jun 2008 13:40:35 GMT,
bpetria@verizon.net (Brad) put
finger to keyboard and composed:
> I have two WinBook XL2 laptops with Windows 98se. Most of the time, I use
>them off line (off the Web) and I don't need the CPU running at full speed
>(400Mhz). The problem is the noisy fan that cools the CPU. This fan is not
>defective since it is noisy on both laptops and it runs constantly after a
>warm up period.
>
> I could not find anything in "Setup" or the manual that allows you to
>reduce the CPU speed.
>
> Is there a utility that would allow me to slow down the CPU, thus
>reducing the heat up so the fan doesn't constantly run?
>
> Thanks in advance, Brad
Short version:
Try CPU cooler software such as CPUidle, Rain, or Waterfall.
Long version:
FWIW, your laptop appears to be manufactured by Twinhead International
Corp. At least that's what the BIOS ID strings appear to be telling
me:
62-3500-001159-00101111-071595-440BX
62-3700-001159-00101111-071595-440BX
Here are the report files for your AMI BIOS (137 is for a laptop with
an ESS modem, 135 is for a Lucent winmodem):
http://www.users.on.net/~fzabkar/Winbook/P98WR135.RPT
http://www.users.on.net/~fzabkar/Winbook/P98WR137.RPT
There are many features in the BIOS setup which have been hidden from
the user, but I still don't see anything that may resolve your issue.
Notably, the Hardware Monitor section has no temperature, voltage, or
fan related settings.
I suggest you try CPU cooler software such as CPUidle, Rain, or
Waterfall, to name a few. IME CPUidle will drop your CPU temperature
by at least 10degC during periods of low activity, at least in a
desktop machine.
See
http://www.benchtest.com/cooler.html
The specs for your laptop ...
http://www.winbookcorp.com/support/xl/xl2/xl2specs.htm
.... state that your main chipset is Intel's 443BX (north bridge) and
PIIX4e (south bridge), and that your IO chipset is National
Semiconductor's NS97338 Super I/O Controller.
The latter "manages the interface to the floppy drive, serial ports,
infrared port and parallel port." Unlike other IO chips, the NS97338
does not appear to have any hardware monitoring capability, but I'm
not sure about this (I can't find its datasheet).
The Celeron and Pentium II CPUs have an on-die thermal diode. The
443BX/PIIX4e datasheet shows this diode connected to an external
thermal sensor which is in turn connected to a "System Controller" or
to the PIIX4e south bridge via an SMBus.
I'd try a hardware monitoring program such as Motherboard Monitor 5:
http://www.softpedia.com/get/System/System-Info/Motherboard-Monitor.shtml
.... or Speedfan:
http://www.softpedia.com/get/Windows-Widgets/System-Utilities/SpeedFan-Temperature-Monitor.shtml
Everest Home Edition also has a Sensor tab under the Computer
category:
http://www.softpedia.com/get/System/System-Info/Everest-Home-Edition.shtml
One or other of the above programs may be able to tell you if you have
a software accessible temperature sensor in your machine.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.