Can W2K Be Installed on SATA Drives?

[W. Watson]

That's the question in the Subject. It seems to be balking at the idea. I
have a 320G Western Digital. It seems to see something less than 320G, and
tells me it wants to establish a C: drive, NTFS, of about 320M, and a D:
drive of about 50M. I told it to continue, and it told me some format was
incompatible with W2K. I just stopped.

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[Dave Patrick]

Re: Can W2K Be Installed on SATA Drives?

If your drive controller is not natively supported (which it wouldn't be)
then you'll want to boot the Windows 2000 install CD-Rom. Then *F6* very
early and very important (at setup is inspecting your system) in the setup
to prevent drive controller detection, and select S to specify additional
drivers. Then later you'll be prompted to insert the manufacturer supplied
Windows 2000 driver for your drive controller in drive "A"

Be sure to apply SP4 and these two below to your new install before
connecting to any network. Internet included. (sasser, msblast)
http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx

Then

Rollup 1 for Microsoft Windows 2000 Service Pack 4
http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en


Then
http://support.microsoft.com/kb/305098


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"W. Watson" wrote:
> That's the question in the Subject. It seems to be balking at the idea. I
> have a 320G Western Digital. It seems to see something less than 320G, and
> tells me it wants to establish a C: drive, NTFS, of about 320M, and a D:
> drive of about 50M. I told it to continue, and it told me some format was
> incompatible with W2K. I just stopped.
>
> --
> Wayne Watson (Nevada City, CA)
>
> Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

Thanks. I'll look into this. I'm using a new ASUS P5NSLI MB.

Dave Patrick wrote:
> If your drive controller is not natively supported (which it wouldn't
> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> very early and very important (at setup is inspecting your system) in
> the setup to prevent drive controller detection, and select S to specify
> additional drivers. Then later you'll be prompted to insert the
> manufacturer supplied Windows 2000 driver for your drive controller in
> drive "A"
>
> Be sure to apply SP4 and these two below to your new install before
> connecting to any network. Internet included. (sasser, msblast)
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>
> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>
> Then
>
> Rollup 1 for Microsoft Windows 2000 Service Pack 4
> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>
>
>
> Then
> http://support.microsoft.com/kb/305098
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[Colon Terminus]

Re: Can W2K Be Installed on SATA Drives?


You'll also want to amend the registry with the Big:LBA hack immediately
after the install completes.


"W. Watson" <wolf_tracks@invalid.com> wrote in message
news:Kfcui.1223$3x.836@newssvr25.news.prodigy.net...
> Thanks. I'll look into this. I'm using a new ASUS P5NSLI MB.
>
> Dave Patrick wrote:
> > If your drive controller is not natively supported (which it wouldn't
> > be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> > very early and very important (at setup is inspecting your system) in
> > the setup to prevent drive controller detection, and select S to specify
> > additional drivers. Then later you'll be prompted to insert the
> > manufacturer supplied Windows 2000 driver for your drive controller in
> > drive "A"
> >
> > Be sure to apply SP4 and these two below to your new install before
> > connecting to any network. Internet included. (sasser, msblast)
> >
http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFEC
D095E/W2KSP4_EN.EXE
> >
> > http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> > http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
> >
> > Then
> >
> > Rollup 1 for Microsoft Windows 2000 Service Pack 4
> >
http://www.microsoft.com/downloads/details.aspx?amp;displaylang=en&familyid=
B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en
> >
> >
> >
> > Then
> > http://support.microsoft.com/kb/305098
> >
> >
>
> --
> Wayne Watson (Nevada City, CA)
>
> Web Page: <speckledwithStars.net>



--
Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
------->>>>>>http://www.NewsDemon.com<<<<<<------
Unlimited Access, Anonymous Accounts, Uncensored Broadband Access

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

Before continuing with the install, let me list the particulars of the
window I see on my monitor when I stopped.

76294 MB Dis 0k on bus 0 on atapi
C:NIFS(Drv1_main) 76003MB<6360MB Free
D:FAT32(Drv1_extra) 290MB<237MB Free

131070MB Disk 0 at at 0? on? bus 0 on atapi (I didn't copy the ? legibly)
Unpartitioned space 131069MB

From BIOS the HD is WDC WD32000AAJS-0

(I'll ask more about this registery mod when I've completed the install)

Is an XP install going to help install matters here?


Colon Terminus wrote:
> You'll also want to amend the registry with the Big:LBA hack immediately
> after the install completes.
>
>
> "W. Watson" <wolf_tracks@invalid.com> wrote in message
> news:Kfcui.1223$3x.836@newssvr25.news.prodigy.net...
>> Thanks. I'll look into this. I'm using a new ASUS P5NSLI MB.
>>
>> Dave Patrick wrote:
>>> If your drive controller is not natively supported (which it wouldn't
>>> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
>>> very early and very important (at setup is inspecting your system) in
>>> the setup to prevent drive controller detection, and select S to specify
>>> additional drivers. Then later you'll be prompted to insert the
>>> manufacturer supplied Windows 2000 driver for your drive controller in
>>> drive "A"
>>>
>>> Be sure to apply SP4 and these two below to your new install before
>>> connecting to any network. Internet included. (sasser, msblast)
>>>
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFEC
> D095E/W2KSP4_EN.EXE
>>> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
>>> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>>>
>>> Then
>>>
>>> Rollup 1 for Microsoft Windows 2000 Service Pack 4
>>>
> http://www.microsoft.com/downloads/details.aspx?amp;displaylang=en&familyid=
> B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en
>>>
>>>
>>> Then
>>> http://support.microsoft.com/kb/305098
>>>
>>>
>> --
>> Wayne Watson (Nevada City, CA)
>>
>> Web Page: <speckledwithStars.net>
>
>
>
> --
> Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
> ------->>>>>>http://www.NewsDemon.com<<<<<<------
> Unlimited Access, Anonymous Accounts, Uncensored Broadband Access

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[Andy]

Re: Can W2K Be Installed on SATA Drives?

Windows 2000 setup cannot access past the 137 GB point on an IDE or
SATA disk drive that is connected to the motherboard chipset
interface.

If you want to install Windows 2000 on the 320 GB drive, you can
temporarily connect it to a PCI controller that has a Windows driver
that supports 48-bit LBA access, and load the driver during setup.
After configuring the installed Windows 2000 for 48-bit LBA access
(SP3 or 4, plus EnableBigLba = 1 in the registry), you can reconnect
it to the motherboard interface.

On Wed, 08 Aug 2007 01:58:28 GMT, "W. Watson"
<wolf_tracks@invalid.com> wrote:

>That's the question in the Subject. It seems to be balking at the idea. I
>have a 320G Western Digital. It seems to see something less than 320G, and
>tells me it wants to establish a C: drive, NTFS, of about 320M, and a D:
>drive of about 50M. I told it to continue, and it told me some format was
>incompatible with W2K. I just stopped.

 

[Quaestor]

Re: Can W2K Be Installed on SATA Drives?

Andy wrote:

>Windows 2000 setup cannot access past the 137 GB point on an IDE or
>SATA disk drive that is connected to the motherboard chipset
>interface.
>
>If you want to install Windows 2000 on the 320 GB drive, you can
>temporarily connect it to a PCI controller that has a Windows driver
>that supports 48-bit LBA access, and load the driver during setup.
>After configuring the installed Windows 2000 for 48-bit LBA access
>(SP3 or 4, plus EnableBigLba = 1 in the registry), you can reconnect
>it to the motherboard interface.
>
>

Partitioning about 20 gigs to use as the system drive before installing
makes all these problems go away.


--
Those who try to hide behind Godwin are the real net-nazis.
Philosophy: Joking about why we cuss so much.
Learn about spam: http://www.seige-perilous.org/spam/spam.html
[fourth line intentionally left blank]

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

Bueno, thanks. I'm about to proceed today.

Quaestor wrote:
> Andy wrote:
>
>> Windows 2000 setup cannot access past the 137 GB point on an IDE or
>> SATA disk drive that is connected to the motherboard chipset
>> interface.
>>
>> If you want to install Windows 2000 on the 320 GB drive, you can
>> temporarily connect it to a PCI controller that has a Windows driver
>> that supports 48-bit LBA access, and load the driver during setup.
>> After configuring the installed Windows 2000 for 48-bit LBA access
>> (SP3 or 4, plus EnableBigLba = 1 in the registry), you can reconnect
>> it to the motherboard interface.
>>
>>
>
> Partitioning about 20 gigs to use as the system drive before installing
> makes all these problems go away.
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[Andy]

Re: Can W2K Be Installed on SATA Drives?

On Thu, 09 Aug 2007 00:45:59 -0700, Quaestor <no.spam@my.place> wrote:

>Andy wrote:
>
>>Windows 2000 setup cannot access past the 137 GB point on an IDE or
>>SATA disk drive that is connected to the motherboard chipset
>>interface.
>>
>>If you want to install Windows 2000 on the 320 GB drive, you can
>>temporarily connect it to a PCI controller that has a Windows driver
>>that supports 48-bit LBA access, and load the driver during setup.
>>After configuring the installed Windows 2000 for 48-bit LBA access
>>(SP3 or 4, plus EnableBigLba = 1 in the registry), you can reconnect
>>it to the motherboard interface.
>>
>>
>
>Partitioning about 20 gigs to use as the system drive before installing
>makes all these problems go away.

That's true until the disk is fully partitioned. Once the disk is
fully partitioned, you won't be able to run Windows 2000 setup
sucessfully again.

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

I had a big delay in getting started. I now have the time to really start.

Andy wrote:
> On Thu, 09 Aug 2007 00:45:59 -0700, Quaestor <no.spam@my.place> wrote:
>
>> Andy wrote:
>>
>>> Windows 2000 setup cannot access past the 137 GB point on an IDE or
>>> SATA disk drive that is connected to the motherboard chipset
>>> interface.
>>>
>>> If you want to install Windows 2000 on the 320 GB drive, you can
>>> temporarily connect it to a PCI controller that has a Windows driver
>>> that supports 48-bit LBA access, and load the driver during setup.
>>> After configuring the installed Windows 2000 for 48-bit LBA access
>>> (SP3 or 4, plus EnableBigLba = 1 in the registry), you can reconnect
>>> it to the motherboard interface.
>>>
>>>
>> Partitioning about 20 gigs to use as the system drive before installing
>> makes all these problems go away.
>
> That's true until the disk is fully partitioned. Once the disk is
> fully partitioned, you won't be able to run Windows 2000 setup
> sucessfully again.

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

Well, I'm off like a herd of turtles. Your description is closest to what
ASUS recommends. I called 10 minutes before they closed, so got a hurry up
briefing on how to do this.
1. Fire up the PC
2. Place their driver CD in the drive
3. Wait for the initial ASUS screen to appear, and finally a
prompt to boot from the CD. Press a key to start the boot.
(Of course, you need to set BIOS to know to start the boot
from a CD before trying a HD or other device.
4. Wait for a prompt to choose 32-bit, 64-bit or DOS prompt
5. I selected 32-bit. Wait for a prompt for a floppy
6. Place a 3.5" (fresh) floppy disk in drive-A. Wait for 8
files to be copied to the CD
I've done all the above. I have not verified the following, but
from what I could get in the short conversation, this is it.
1. Insert the W2K CD
2. Press the boot button
3. Hit F6 soon
4. A prompt for the floppy appears
5. Put it in if you took it out
6. Continue letting the system get what it needs
7. Press F8 to continue the install

That's about it. I'll call them in the morning to see if this plays well
with them.

The woman who helped me seemed to know her stuff. I had contacted them 3
times earlier on some problems related to their driver CD and the floppy.
She was the best of the lot. She got into some issues about qualified
vendors, and memory. Her points about memory caused some discussion.
Interesting, but I'll have to revisit them tomorrow. We got off briefly on
red/black SARA ports and what RAID really meant. Even though I have a single
WD 320G drive, she recommended going with RAID. A second drive can be added
later, if needed or useful. We got a lot in in 10 minutes. Maybe it was 15
minutes!

Almost all the four people I talked to claimed the manual had instructions
on how to install w2k. Not so. I looked at them, and they are nowhere as
detailed as the above. In fact, the s/w window panels they show don't seem
to exist. I'll revisit that another day.


Dave Patrick wrote:
> If your drive controller is not natively supported (which it wouldn't
> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> very early and very important (at setup is inspecting your system) in
> the setup to prevent drive controller detection, and select S to specify
> additional drivers. Then later you'll be prompted to insert the
> manufacturer supplied Windows 2000 driver for your drive controller in
> drive "A"
>
> Be sure to apply SP4 and these two below to your new install before
> connecting to any network. Internet included. (sasser, msblast)
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>
> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>
> Then
>
> Rollup 1 for Microsoft Windows 2000 Service Pack 4
> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>
>
>
> Then
> http://support.microsoft.com/kb/305098
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

Well, I got the drivers on the floppy for a 32-bit system. As I looked at
the dialog to do this, it talked to SCSI. I'm surprised that SCSI even
appeared. SATA is SCSI? Anyway, I proceeded to install w2k, and got the
setup to read the floppy. After it made it through setup, I got to a window
about partitionining C: and D:. I had reported about this very same window
in another part of the thread. Again it showed that it was going to
partition C to 76G NTFS and D to 1/4 FAT.

On that I called ASUS. The tech guy said to proceed and then install SP4. I
asked if this was going to allow me to access all 320G of the WD HD. He
wasn't sure. He then went onto mention that even with XP the same thing
could happen, but using XP (usually??) solved the problem. I find that
rather a startling statement. I think he did say usually. I then got off on
how their manual barely talks to any of this. He said one of the supplied
CDs talks about RAID installations. Well, it's certainly not on the EVEA CD
supplied. Ah, here it is buried in the driver CD, 110 pages. Let's skip to
the next paragraph.

My question now is if I get (from another PC hooked to the internet) the
security downloads and the roll up mentioned below, am I going to see all 320G.

W. Watson wrote:
> Well, I'm off like a herd of turtles. Your description is closest to
> what ASUS recommends. I called 10 minutes before they closed, so got a
> hurry up
> briefing on how to do this.
> 1. Fire up the PC
> 2. Place their driver CD in the drive
> 3. Wait for the initial ASUS screen to appear, and finally a
> prompt to boot from the CD. Press a key to start the boot.
> (Of course, you need to set BIOS to know to start the boot
> from a CD before trying a HD or other device.
> 4. Wait for a prompt to choose 32-bit, 64-bit or DOS prompt
> 5. I selected 32-bit. Wait for a prompt for a floppy
> 6. Place a 3.5" (fresh) floppy disk in drive-A. Wait for 8
> files to be copied to the CD
> I've done all the above. I have not verified the following, but
> from what I could get in the short conversation, this is it.
> 1. Insert the W2K CD
> 2. Press the boot button
> 3. Hit F6 soon
> 4. A prompt for the floppy appears
> 5. Put it in if you took it out
> 6. Continue letting the system get what it needs
> 7. Press F8 to continue the install
>
> That's about it. I'll call them in the morning to see if this plays well
> with them.
>
> The woman who helped me seemed to know her stuff. I had contacted them 3
> times earlier on some problems related to their driver CD and the
> floppy. She was the best of the lot. She got into some issues about
> qualified vendors, and memory. Her points about memory caused some
> discussion. Interesting, but I'll have to revisit them tomorrow. We got
> off briefly on red/black SARA ports and what RAID really meant. Even
> though I have a single WD 320G drive, she recommended going with RAID. A
> second drive can be added later, if needed or useful. We got a lot in in
> 10 minutes. Maybe it was 15 minutes!
>
> Almost all the four people I talked to claimed the manual had
> instructions on how to install w2k. Not so. I looked at them, and they
> are nowhere as detailed as the above. In fact, the s/w window panels
> they show don't seem to exist. I'll revisit that another day.
>
>
> Dave Patrick wrote:
>> If your drive controller is not natively supported (which it wouldn't
>> be) then you'll want to boot the Windows 2000 install CD-Rom. Then
>> *F6* very early and very important (at setup is inspecting your
>> system) in the setup to prevent drive controller detection, and select
>> S to specify additional drivers. Then later you'll be prompted to
>> insert the manufacturer supplied Windows 2000 driver for your drive
>> controller in drive "A"
>>
>> Be sure to apply SP4 and these two below to your new install before
>> connecting to any network. Internet included. (sasser, msblast)
>> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>>
>> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
>> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>>
>> Then
>>
>> Rollup 1 for Microsoft Windows 2000 Service Pack 4
>> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>>
>>
>>
>> Then
>> http://support.microsoft.com/kb/305098
>>
>>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

What exactly am I supposed to download in the rollup? Is it all the W2K
downloads listed on
<http://www.microsoft.com/downloads/Search.aspx?displaylang=en>. 1/4th way
down under Recommended Downloads. #40, #82,... There are 686 listed. Don't
these, as necessary, automatically get applied by W2K on occasion when I'm
attached to the internet?

Dave Patrick wrote:
> If your drive controller is not natively supported (which it wouldn't
> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> very early and very important (at setup is inspecting your system) in
> the setup to prevent drive controller detection, and select S to specify
> additional drivers. Then later you'll be prompted to insert the
> manufacturer supplied Windows 2000 driver for your drive controller in
> drive "A"
>
> Be sure to apply SP4 and these two below to your new install before
> connecting to any network. Internet included. (sasser, msblast)
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>
> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>
> Then
>
> Rollup 1 for Microsoft Windows 2000 Service Pack 4
> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>
>
>
> Then
> http://support.microsoft.com/kb/305098
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

What exactly am I supposed to download in the rollup? Is it all the W2K
downloads listed on
<http://www.microsoft.com/downloads/Search.aspx?displaylang=en>. 1/4th way
down under Recommended Downloads. #40, #82,... There are 686 listed. Don't
these, as necessary, automatically get applied by W2K on occasion when I'm
attached to the internet?

Dave Patrick wrote:
> If your drive controller is not natively supported (which it wouldn't
> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> very early and very important (at setup is inspecting your system) in
> the setup to prevent drive controller detection, and select S to specify
> additional drivers. Then later you'll be prompted to insert the
> manufacturer supplied Windows 2000 driver for your drive controller in
> drive "A"
>
> Be sure to apply SP4 and these two below to your new install before
> connecting to any network. Internet included. (sasser, msblast)
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>
> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>
> Then
>
> Rollup 1 for Microsoft Windows 2000 Service Pack 4
> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>
>
>
> Then
> http://support.microsoft.com/kb/305098
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[W. Watson]

Re: Can W2K Be Installed on SATA Drives?

What exactly am I supposed to download in the rollup? Is it all the W2K
downloads listed on
<http://www.microsoft.com/downloads/Search.aspx?displaylang=en>. 1/4th way
down under Recommended Downloads. #40, #82,... There are 686 listed. Don't
these, as necessary, automatically get applied by W2K on occasion when I'm
attached to the internet?

Dave Patrick wrote:
> If your drive controller is not natively supported (which it wouldn't
> be) then you'll want to boot the Windows 2000 install CD-Rom. Then *F6*
> very early and very important (at setup is inspecting your system) in
> the setup to prevent drive controller detection, and select S to specify
> additional drivers. Then later you'll be prompted to insert the
> manufacturer supplied Windows 2000 driver for your drive controller in
> drive "A"
>
> Be sure to apply SP4 and these two below to your new install before
> connecting to any network. Internet included. (sasser, msblast)
> http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
>
> http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
> http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
>
> Then
>
> Rollup 1 for Microsoft Windows 2000 Service Pack 4
> http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
>
>
>
> Then
> http://support.microsoft.com/kb/305098
>
>

--
Wayne Watson (Nevada City, CA)

Web Page: <speckledwithStars.net>

 

[Dave Patrick]

Re: Can W2K Be Installed on SATA Drives?

Depends on the hardware and or controller bios really.

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"W. Watson" wrote:
> My question now is if I get (from another PC hooked to the internet) the
> security downloads and the roll up mentioned below, am I going to see all
> 320G.

 

[Dave Patrick]

Re: Can W2K Be Installed on SATA Drives?

Download the file;

File Name: Windows2000-KB891861-v2-x86-ENU.EXE
Version: 891861
Knowledge Base (KB) Articles: KB891861
Date Published: 9/13/2005
Language: English
Download Size: 31.2 MB

It's a compliation of all listed here.
http://support.microsoft.com/?kbid=891861


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"W. Watson" wrote:
> What exactly am I supposed to download in the rollup? Is it all the W2K
> downloads listed on