Installation locks up eating memory

[Adrian Brown]

Hi
I posted a few days ago about a problem with SBS2003 fresh install locking
up during server tools setup on Internet Explorer 6.0 installtion. I had a
reply saying it was probably due to an active internet connection. Since
this i have installed a brand new harddrive and pulled the plug on the
router while attempting the setup. Again the initial part of the setup is
fine, its when it gets to the actual server configuration. Its gets as far
as installing server tools, the message says its doing internet explorer
6.0. Ive left it at this point for several hours and it gets no futher. A
look in the process list shows the setup process is just eating more and
more memory. After a few hours it was up past 1gb of memory.

I searched the harddrive for what was growing as i was also loosing
harddrive space during this point. It turned out it was a log file
(eventlog.txt) it keeps adding the same lines over and over again - these
are

[07/04/08,09:37:38] Setup.exe: GetCustomProperties()
[07/04/08,09:37:38] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()
[07/04/08,09:37:39] Setup.exe: GetCustomProperties()
[07/04/08,09:37:39] Setup.exe: get_CustomProperties()


Ive got lots more logs, but i cant attach them as the message is too big
then. The only other thing that mmight be of use was the errorlog.txt -
this has the following in

[07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
properly. Please relaunch via add remove programs or from CD.
[07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
while trying to set install action override: Microsoft Exchange Messaging
and Collaboration Services
[07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
while trying to set install action override: Microsoft Exchange System
Management Tools
[07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
while trying to set install action override: Microsoft Exchange Domain
Preparation
[07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
while trying to set install action override: Microsoft Exchange Forest
Preparation
[07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
Updating Configuration
[07/04/08,08:38:00] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
failed in CPageBase::GetGlobalProperty(): GUID =
{F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
[07/04/08,08:44:40] Microsoft Integration: [2]
ISetupDataFile::GetPropertyValue() failed for account information in
ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
component ID =
{829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
property name = (null)
[07/04/08,08:44:40] Microsoft Integration: [2]
ISetupDataFile::GetPropertyValue() failed for account information in
ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
component ID =
{829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
property name = (null)
[07/04/08,08:44:41] Microsoft Integration: [2]
ISetupComponent::SetInstallActionByUniqueID() failed in
ISetupManager::LoadPersistantComponentData(): component name =
{685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
action id = 2
[07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
failed in ISetupManager::LoadPersistantData()
({df8ff64a-1967-4871-9e32-ca2f819bab81})
[07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
failed in ISetupManager::LoadPersistantData()
({c248d3e3-632d-4435-888a-83035c144737})
[07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
failed in CPageBase::GetGlobalProperty(): GUID =
{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
[07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
failed in CPageBase::GetGlobalProperty(): GUID =
{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
[07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
container for [LDAP://CN=Internet Users,OU=Security
Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
[07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
container for [LDAP://CN=Internet Users,OU=Security
Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
[07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
container for [LDAP://CN=Internet Users,OU=Security
Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
[07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
container for [LDAP://CN=Internet Users,OU=Security
Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
[07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key is
bogus, deleting...
[07/04/08,09:20:18] Monitoring: [2]
RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002
[07/04/08,09:22:04] Networking: [2] An error occurred while copying files
for the Networking component. See C:\Program Files\Microsoft
Integration\Windows Small Business Server 2003\Logs\SBSMSI-Connectivity.LOG
for the list of files that were not copied. You may want to run Setup again
and reinstall the component.
[07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
CClientX::HrGetSTSVersion. This is a clean install of ClientX.

[07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\Program
Files\Microsoft Windows Small Business Server\ClientSetup\Clients [1]
[07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
C:\ClientApps [1]
[07/04/08,09:27:00] Client Deployment: [2] Error copying service packs with
error [3].


Any help on this would be great.

 

[Merv Porter [SBS-MVP]]

Re: Installation locks up eating memory

What are the specs for the server? (mfg/model of Motherboard, RAID, amount
of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)

You siad you unplugged the router. Did you then connect one NIC into the
router and the other NIC into a live (powered on) switch/hub that did not
have any other devices connected to it?

Are you using an internal CDROM for the SBS install?

Does the SBS Setup complete if you go to Add/Remove programs and select the
Microsoft Windows Small Business Server 2003 item?

Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can the
entire contents of the CDs be read in another machine; I'm thinking a CD
problem here).

--
Merv Porter [SBS-MVP]
============================

"Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
> Hi
> I posted a few days ago about a problem with SBS2003 fresh install locking
> up during server tools setup on Internet Explorer 6.0 installtion. I had
> a
> reply saying it was probably due to an active internet connection. Since
> this i have installed a brand new harddrive and pulled the plug on the
> router while attempting the setup. Again the initial part of the setup is
> fine, its when it gets to the actual server configuration. Its gets as
> far
> as installing server tools, the message says its doing internet explorer
> 6.0. Ive left it at this point for several hours and it gets no futher.
> A
> look in the process list shows the setup process is just eating more and
> more memory. After a few hours it was up past 1gb of memory.
>
> I searched the harddrive for what was growing as i was also loosing
> harddrive space during this point. It turned out it was a log file
> (eventlog.txt) it keeps adding the same lines over and over again - these
> are
>
> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>
>
> Ive got lots more logs, but i cant attach them as the message is too big
> then. The only other thing that mmight be of use was the errorlog.txt -
> this has the following in
>
> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
> properly. Please relaunch via add remove programs or from CD.
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Messaging
> and Collaboration Services
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange System
> Management Tools
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Domain
> Preparation
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Forest
> Preparation
> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
> Updating Configuration
> [07/04/08,08:38:00] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
> [07/04/08,08:44:40] Microsoft Integration: [2]
> ISetupDataFile::GetPropertyValue() failed for account information in
> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
> component ID =
> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
> property name = (null)
> [07/04/08,08:44:40] Microsoft Integration: [2]
> ISetupDataFile::GetPropertyValue() failed for account information in
> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
> component ID =
> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
> property name = (null)
> [07/04/08,08:44:41] Microsoft Integration: [2]
> ISetupComponent::SetInstallActionByUniqueID() failed in
> ISetupManager::LoadPersistantComponentData(): component name =
> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
> action id = 2
> [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
> failed in ISetupManager::LoadPersistantData()
> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
> [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
> failed in ISetupManager::LoadPersistantData()
> ({c248d3e3-632d-4435-888a-83035c144737})
> [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
> [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key
> is bogus, deleting...
> [07/04/08,09:20:18] Monitoring: [2]
> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002
> [07/04/08,09:22:04] Networking: [2] An error occurred while copying files
> for the Networking component. See C:\Program Files\Microsoft
> Integration\Windows Small Business Server
> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
> copied. You may want to run Setup again and reinstall the component.
> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>
> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
> C:\Program Files\Microsoft Windows Small Business
> Server\ClientSetup\Clients [1]
> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
> C:\ClientApps [1]
> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
> with error [3].
>
>
> Any help on this would be great.
>
>

 

[Adrian Brown]

Re: Installation locks up eating memory

Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
SATA Harddrives on a software RAID. I havent got the rest of the details to
hand at the moment. It is an internal CDROM, IDE. THe machine has 2 x NIC.
One is connected to a live HUB and 1 is connected to the live ADSL router.
Neither have any other device connected.

Ive made a copy of CD3 onto a harddrive as i suspected this was the problem
as its on cd 3 the error occurs. I can try and copy CD 1 as well to make
sure. I havent tried using add/remove programs, i was forced to shut the
server down with this problem and as such when i swithc on i tried to re-run
'continue setup' icon but it fails (i cant remmeber the exact message).

Many Thanks


Adrian

"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
> What are the specs for the server? (mfg/model of Motherboard, RAID, amount
> of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>
> You siad you unplugged the router. Did you then connect one NIC into the
> router and the other NIC into a live (powered on) switch/hub that did not
> have any other devices connected to it?
>
> Are you using an internal CDROM for the SBS install?
>
> Does the SBS Setup complete if you go to Add/Remove programs and select
> the Microsoft Windows Small Business Server 2003 item?
>
> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can the
> entire contents of the CDs be read in another machine; I'm thinking a CD
> problem here).
>
> --
> Merv Porter [SBS-MVP]
> ============================
>
> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>> Hi
>> I posted a few days ago about a problem with SBS2003 fresh install
>> locking
>> up during server tools setup on Internet Explorer 6.0 installtion. I had
>> a
>> reply saying it was probably due to an active internet connection. Since
>> this i have installed a brand new harddrive and pulled the plug on the
>> router while attempting the setup. Again the initial part of the setup
>> is
>> fine, its when it gets to the actual server configuration. Its gets as
>> far
>> as installing server tools, the message says its doing internet explorer
>> 6.0. Ive left it at this point for several hours and it gets no futher.
>> A
>> look in the process list shows the setup process is just eating more and
>> more memory. After a few hours it was up past 1gb of memory.
>>
>> I searched the harddrive for what was growing as i was also loosing
>> harddrive space during this point. It turned out it was a log file
>> (eventlog.txt) it keeps adding the same lines over and over again -
>> these
>> are
>>
>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>
>>
>> Ive got lots more logs, but i cant attach them as the message is too big
>> then. The only other thing that mmight be of use was the errorlog.txt -
>> this has the following in
>>
>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>> properly. Please relaunch via add remove programs or from CD.
>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>> while trying to set install action override: Microsoft Exchange Messaging
>> and Collaboration Services
>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>> while trying to set install action override: Microsoft Exchange System
>> Management Tools
>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>> while trying to set install action override: Microsoft Exchange Domain
>> Preparation
>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>> while trying to set install action override: Microsoft Exchange Forest
>> Preparation
>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
>> Updating Configuration
>> [07/04/08,08:38:00] WizardUI: [2]
>> ISetupManager::GetGlobalCustomProperty() failed in
>> CPageBase::GetGlobalProperty(): GUID =
>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>> [07/04/08,08:44:40] Microsoft Integration: [2]
>> ISetupDataFile::GetPropertyValue() failed for account information in
>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>> component ID =
>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>> property name = (null)
>> [07/04/08,08:44:40] Microsoft Integration: [2]
>> ISetupDataFile::GetPropertyValue() failed for account information in
>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>> component ID =
>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>> property name = (null)
>> [07/04/08,08:44:41] Microsoft Integration: [2]
>> ISetupComponent::SetInstallActionByUniqueID() failed in
>> ISetupManager::LoadPersistantComponentData(): component name =
>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>> action id = 2
>> [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
>> failed in ISetupManager::LoadPersistantData()
>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>> [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
>> failed in ISetupManager::LoadPersistantData()
>> ({c248d3e3-632d-4435-888a-83035c144737})
>> [07/04/08,08:48:04] WizardUI: [2]
>> ISetupManager::GetGlobalCustomProperty() failed in
>> CPageBase::GetGlobalProperty(): GUID =
>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>> [07/04/08,08:48:04] WizardUI: [2]
>> ISetupManager::GetGlobalCustomProperty() failed in
>> CPageBase::GetGlobalProperty(): GUID =
>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>> container for [LDAP://CN=Internet Users,OU=Security
>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>> container for [LDAP://CN=Internet Users,OU=Security
>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>> container for [LDAP://CN=Internet Users,OU=Security
>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>> container for [LDAP://CN=Internet Users,OU=Security
>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key
>> is bogus, deleting...
>> [07/04/08,09:20:18] Monitoring: [2]
>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>> 80070002
>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying files
>> for the Networking component. See C:\Program Files\Microsoft
>> Integration\Windows Small Business Server
>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>> copied. You may want to run Setup again and reinstall the component.
>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>
>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>> C:\Program Files\Microsoft Windows Small Business
>> Server\ClientSetup\Clients [1]
>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>> C:\ClientApps [1]
>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>> with error [3].
>>
>>
>> Any help on this would be great.
>>
>>
>
>

 

[Merv Porter [SBS-MVP]]

Re: Installation locks up eating memory

Hi Adrian,

Reformat both drives so they are back to "Basic" instead of "Dynamic". Now
unplug the secondary disk. Then reinstall SBS on the primary disk starting
with CD1. When the base Windows 2003 server is installed, configure your
partitions (if necessary) and the external NIC settings. Do not make the
disks dynamic yet. Now continue with the SBS component install. When
finished, run CEICW to set up the SBS components and make sure all is well.
Assuming everything completes properly, you can then shut down, re-connect
the secondary drive, boot and make the disks dynamic. Then mirror them.

CEICW Walkthrough
http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm

--
Merv Porter [SBS-MVP]
============================

"Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
> SATA Harddrives on a software RAID. I havent got the rest of the details
> to hand at the moment. It is an internal CDROM, IDE. THe machine has 2 x
> NIC. One is connected to a live HUB and 1 is connected to the live ADSL
> router. Neither have any other device connected.
>
> Ive made a copy of CD3 onto a harddrive as i suspected this was the
> problem as its on cd 3 the error occurs. I can try and copy CD 1 as well
> to make sure. I havent tried using add/remove programs, i was forced to
> shut the server down with this problem and as such when i swithc on i
> tried to re-run 'continue setup' icon but it fails (i cant remmeber the
> exact message).
>
> Many Thanks
>
>
> Adrian
>
> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>>
>> You siad you unplugged the router. Did you then connect one NIC into the
>> router and the other NIC into a live (powered on) switch/hub that did not
>> have any other devices connected to it?
>>
>> Are you using an internal CDROM for the SBS install?
>>
>> Does the SBS Setup complete if you go to Add/Remove programs and select
>> the Microsoft Windows Small Business Server 2003 item?
>>
>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can the
>> entire contents of the CDs be read in another machine; I'm thinking a CD
>> problem here).
>>
>> --
>> Merv Porter [SBS-MVP]
>> ============================
>>
>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>> Hi
>>> I posted a few days ago about a problem with SBS2003 fresh install
>>> locking
>>> up during server tools setup on Internet Explorer 6.0 installtion. I
>>> had a
>>> reply saying it was probably due to an active internet connection.
>>> Since
>>> this i have installed a brand new harddrive and pulled the plug on the
>>> router while attempting the setup. Again the initial part of the setup
>>> is
>>> fine, its when it gets to the actual server configuration. Its gets as
>>> far
>>> as installing server tools, the message says its doing internet explorer
>>> 6.0. Ive left it at this point for several hours and it gets no futher.
>>> A
>>> look in the process list shows the setup process is just eating more and
>>> more memory. After a few hours it was up past 1gb of memory.
>>>
>>> I searched the harddrive for what was growing as i was also loosing
>>> harddrive space during this point. It turned out it was a log file
>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>> these
>>> are
>>>
>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>
>>>
>>> Ive got lots more logs, but i cant attach them as the message is too big
>>> then. The only other thing that mmight be of use was the errorlog.txt -
>>> this has the following in
>>>
>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>> properly. Please relaunch via add remove programs or from CD.
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange
>>> Messaging and Collaboration Services
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange System
>>> Management Tools
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange Domain
>>> Preparation
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange Forest
>>> Preparation
>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
>>> Updating Configuration
>>> [07/04/08,08:38:00] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>> and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>> component ID =
>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>> property name = (null)
>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>> and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>> component ID =
>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>> property name = (null)
>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>> ISetupManager::LoadPersistantComponentData(): component name =
>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>> action id = 2
>>> [07/04/08,08:44:41] setup.exe: [2]
>>> ISetupManager::AddGlobalCustomProperty failed in
>>> ISetupManager::LoadPersistantData()
>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>> [07/04/08,08:44:42] setup.exe: [2]
>>> ISetupManager::AddGlobalCustomProperty failed in
>>> ISetupManager::LoadPersistantData()
>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>> [07/04/08,08:48:04] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>> [07/04/08,08:48:04] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg
>>> key is bogus, deleting...
>>> [07/04/08,09:20:18] Monitoring: [2]
>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>> 80070002
>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>> files for the Networking component. See C:\Program Files\Microsoft
>>> Integration\Windows Small Business Server
>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>> copied. You may want to run Setup again and reinstall the component.
>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>
>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>> C:\Program Files\Microsoft Windows Small Business
>>> Server\ClientSetup\Clients [1]
>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>> C:\ClientApps [1]
>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>>> with error [3].
>>>
>>>
>>> Any help on this would be great.
>>>
>>>
>>
>>
>

 

[Jim Behning SBS MVP]

Re: Installation locks up eating memory

One gig of ram is really about 1/4 of what I like to see in a server.
At least 2 gigs in a SBS but we deliver with 4 gigs now.

Hub is a performance issue. I know you can buy hubs at Walmart but you
really should have a 100mb switch or faster. Heck even a 10 mb switch
would work better than a hub but you are not at the point of slow
network performance yet. Note a hub and lack of ram will cause
performance issues when you go production. Lack of ram will cause the
install to go slower.

On Tue, 8 Jul 2008 13:41:21 +0100, "Adrian Brown"
<adrian@apbcomputerservices.co.uk> wrote:

>Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
>SATA Harddrives on a software RAID. I havent got the rest of the details to
>hand at the moment. It is an internal CDROM, IDE. THe machine has 2 x NIC.
>One is connected to a live HUB and 1 is connected to the live ADSL router.
>Neither have any other device connected.
>
>Ive made a copy of CD3 onto a harddrive as i suspected this was the problem
>as its on cd 3 the error occurs. I can try and copy CD 1 as well to make
>sure. I havent tried using add/remove programs, i was forced to shut the
>server down with this problem and as such when i swithc on i tried to re-run
>'continue setup' icon but it fails (i cant remmeber the exact message).
>
>Many Thanks
>
>
>Adrian
>
>"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>> What are the specs for the server? (mfg/model of Motherboard, RAID, amount
>> of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>>
>> You siad you unplugged the router. Did you then connect one NIC into the
>> router and the other NIC into a live (powered on) switch/hub that did not
>> have any other devices connected to it?
>>
>> Are you using an internal CDROM for the SBS install?
>>
>> Does the SBS Setup complete if you go to Add/Remove programs and select
>> the Microsoft Windows Small Business Server 2003 item?
>>
>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can the
>> entire contents of the CDs be read in another machine; I'm thinking a CD
>> problem here).
>>
>> --
>> Merv Porter [SBS-MVP]
>> ============================
>>
>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>> Hi
>>> I posted a few days ago about a problem with SBS2003 fresh install
>>> locking
>>> up during server tools setup on Internet Explorer 6.0 installtion. I had
>>> a
>>> reply saying it was probably due to an active internet connection. Since
>>> this i have installed a brand new harddrive and pulled the plug on the
>>> router while attempting the setup. Again the initial part of the setup
>>> is
>>> fine, its when it gets to the actual server configuration. Its gets as
>>> far
>>> as installing server tools, the message says its doing internet explorer
>>> 6.0. Ive left it at this point for several hours and it gets no futher.
>>> A
>>> look in the process list shows the setup process is just eating more and
>>> more memory. After a few hours it was up past 1gb of memory.
>>>
>>> I searched the harddrive for what was growing as i was also loosing
>>> harddrive space during this point. It turned out it was a log file
>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>> these
>>> are
>>>
>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>
>>>
>>> Ive got lots more logs, but i cant attach them as the message is too big
>>> then. The only other thing that mmight be of use was the errorlog.txt -
>>> this has the following in
>>>
>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>> properly. Please relaunch via add remove programs or from CD.
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange Messaging
>>> and Collaboration Services
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange System
>>> Management Tools
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange Domain
>>> Preparation
>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
>>> while trying to set install action override: Microsoft Exchange Forest
>>> Preparation
>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
>>> Updating Configuration
>>> [07/04/08,08:38:00] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
>>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>> component ID =
>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>> property name = (null)
>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
>>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>> component ID =
>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>> property name = (null)
>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>> ISetupManager::LoadPersistantComponentData(): component name =
>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>> action id = 2
>>> [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
>>> failed in ISetupManager::LoadPersistantData()
>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>> [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
>>> failed in ISetupManager::LoadPersistantData()
>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>> [07/04/08,08:48:04] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>> [07/04/08,08:48:04] WizardUI: [2]
>>> ISetupManager::GetGlobalCustomProperty() failed in
>>> CPageBase::GetGlobalProperty(): GUID =
>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>> container for [LDAP://CN=Internet Users,OU=Security
>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key
>>> is bogus, deleting...
>>> [07/04/08,09:20:18] Monitoring: [2]
>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>> 80070002
>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying files
>>> for the Networking component. See C:\Program Files\Microsoft
>>> Integration\Windows Small Business Server
>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>> copied. You may want to run Setup again and reinstall the component.
>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>
>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>> C:\Program Files\Microsoft Windows Small Business
>>> Server\ClientSetup\Clients [1]
>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>> C:\ClientApps [1]
>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>>> with error [3].
>>>
>>>
>>> Any help on this would be great.
>>>
>>>
>>
>>
See what SBS support is working on
http://blogs.technet.com/sbs/default.aspx
Check your SBS with the SBS Best Practices Analyzer
http://blogs.technet.com/sbs/archive/tags/BPA/default.aspx

 

[Adrian Brown]

Re: Installation locks up eating memory

Sorry - should have said Switch - its a 1000 switch. I intend to increase
the ram in the server shortly as this does indeed give performance issues.
This is a small network - only 3 pc's though.


"Jim Behning SBS MVP" <jimbehning@doesthisblockpork.mindspring.com> wrote in
message news:7nq674pslsnd218a2arbp0p8h5t6mv54pg@4ax.com...
> One gig of ram is really about 1/4 of what I like to see in a server.
> At least 2 gigs in a SBS but we deliver with 4 gigs now.
>
> Hub is a performance issue. I know you can buy hubs at Walmart but you
> really should have a 100mb switch or faster. Heck even a 10 mb switch
> would work better than a hub but you are not at the point of slow
> network performance yet. Note a hub and lack of ram will cause
> performance issues when you go production. Lack of ram will cause the
> install to go slower.
>
> On Tue, 8 Jul 2008 13:41:21 +0100, "Adrian Brown"
> <adrian@apbcomputerservices.co.uk> wrote:
>
>>Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
>>SATA Harddrives on a software RAID. I havent got the rest of the details
>>to
>>hand at the moment. It is an internal CDROM, IDE. THe machine has 2 x
>>NIC.
>>One is connected to a live HUB and 1 is connected to the live ADSL router.
>>Neither have any other device connected.
>>
>>Ive made a copy of CD3 onto a harddrive as i suspected this was the
>>problem
>>as its on cd 3 the error occurs. I can try and copy CD 1 as well to make
>>sure. I havent tried using add/remove programs, i was forced to shut the
>>server down with this problem and as such when i swithc on i tried to
>>re-run
>>'continue setup' icon but it fails (i cant remmeber the exact message).
>>
>>Many Thanks
>>
>>
>>Adrian
>>
>>"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>> amount
>>> of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>>>
>>> You siad you unplugged the router. Did you then connect one NIC into
>>> the
>>> router and the other NIC into a live (powered on) switch/hub that did
>>> not
>>> have any other devices connected to it?
>>>
>>> Are you using an internal CDROM for the SBS install?
>>>
>>> Does the SBS Setup complete if you go to Add/Remove programs and select
>>> the Microsoft Windows Small Business Server 2003 item?
>>>
>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can
>>> the
>>> entire contents of the CDs be read in another machine; I'm thinking a CD
>>> problem here).
>>>
>>> --
>>> Merv Porter [SBS-MVP]
>>> ============================
>>>
>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>> Hi
>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>> locking
>>>> up during server tools setup on Internet Explorer 6.0 installtion. I
>>>> had
>>>> a
>>>> reply saying it was probably due to an active internet connection.
>>>> Since
>>>> this i have installed a brand new harddrive and pulled the plug on the
>>>> router while attempting the setup. Again the initial part of the setup
>>>> is
>>>> fine, its when it gets to the actual server configuration. Its gets as
>>>> far
>>>> as installing server tools, the message says its doing internet
>>>> explorer
>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>> futher.
>>>> A
>>>> look in the process list shows the setup process is just eating more
>>>> and
>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>
>>>> I searched the harddrive for what was growing as i was also loosing
>>>> harddrive space during this point. It turned out it was a log file
>>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>>> these
>>>> are
>>>>
>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>
>>>>
>>>> Ive got lots more logs, but i cant attach them as the message is too
>>>> big
>>>> then. The only other thing that mmight be of use was the
>>>> errorlog.txt -
>>>> this has the following in
>>>>
>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>> properly. Please relaunch via add remove programs or from CD.
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem
>>>> while trying to set install action override: Microsoft Exchange
>>>> Messaging
>>>> and Collaboration Services
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem
>>>> while trying to set install action override: Microsoft Exchange System
>>>> Management Tools
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem
>>>> while trying to set install action override: Microsoft Exchange Domain
>>>> Preparation
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem
>>>> while trying to set install action override: Microsoft Exchange Forest
>>>> Preparation
>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
>>>> Updating Configuration
>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>> and
>>>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>>> component ID =
>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>> property name = (null)
>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>> and
>>>> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>>> component ID =
>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>> property name = (null)
>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>> action id = 2
>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>> ISetupManager::AddGlobalCustomProperty
>>>> failed in ISetupManager::LoadPersistantData()
>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>> ISetupManager::AddGlobalCustomProperty
>>>> failed in ISetupManager::LoadPersistantData()
>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg
>>>> key
>>>> is bogus, deleting...
>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>> 80070002
>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>> files
>>>> for the Networking component. See C:\Program Files\Microsoft
>>>> Integration\Windows Small Business Server
>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>>> copied. You may want to run Setup again and reinstall the component.
>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>
>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>> C:\Program Files\Microsoft Windows Small Business
>>>> Server\ClientSetup\Clients [1]
>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>> C:\ClientApps [1]
>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>>>> with error [3].
>>>>
>>>>
>>>> Any help on this would be great.
>>>>
>>>>
>>>
>>>
> See what SBS support is working on
> http://blogs.technet.com/sbs/default.aspx
> Check your SBS with the SBS Best Practices Analyzer
> http://blogs.technet.com/sbs/archive/tags/BPA/default.aspx

 

[Adrian Brown]

Re: Installation locks up eating memory

OK to confirm, I have taken this back to a single 250gb (new low level
formatted) disk - i havent done the raid yet as i wait until sbs is fully
installed before doing this. It is when i continue with the SBS component
install that this problem occurs.


"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
news:%2368%23UrP4IHA.4908@TK2MSFTNGP04.phx.gbl...
> Hi Adrian,
>
> Reformat both drives so they are back to "Basic" instead of "Dynamic".
> Now unplug the secondary disk. Then reinstall SBS on the primary disk
> starting with CD1. When the base Windows 2003 server is installed,
> configure your partitions (if necessary) and the external NIC settings.
> Do not make the disks dynamic yet. Now continue with the SBS component
> install. When finished, run CEICW to set up the SBS components and make
> sure all is well. Assuming everything completes properly, you can then
> shut down, re-connect the secondary drive, boot and make the disks
> dynamic. Then mirror them.
>
> CEICW Walkthrough
> http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
>
> --
> Merv Porter [SBS-MVP]
> ============================
>
> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
> news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
>> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
>> SATA Harddrives on a software RAID. I havent got the rest of the details
>> to hand at the moment. It is an internal CDROM, IDE. THe machine has 2
>> x NIC. One is connected to a live HUB and 1 is connected to the live ADSL
>> router. Neither have any other device connected.
>>
>> Ive made a copy of CD3 onto a harddrive as i suspected this was the
>> problem as its on cd 3 the error occurs. I can try and copy CD 1 as well
>> to make sure. I havent tried using add/remove programs, i was forced to
>> shut the server down with this problem and as such when i swithc on i
>> tried to re-run 'continue setup' icon but it fails (i cant remmeber the
>> exact message).
>>
>> Many Thanks
>>
>>
>> Adrian
>>
>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>>>
>>> You siad you unplugged the router. Did you then connect one NIC into
>>> the router and the other NIC into a live (powered on) switch/hub that
>>> did not have any other devices connected to it?
>>>
>>> Are you using an internal CDROM for the SBS install?
>>>
>>> Does the SBS Setup complete if you go to Add/Remove programs and select
>>> the Microsoft Windows Small Business Server 2003 item?
>>>
>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can
>>> the entire contents of the CDs be read in another machine; I'm thinking
>>> a CD problem here).
>>>
>>> --
>>> Merv Porter [SBS-MVP]
>>> ============================
>>>
>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>> Hi
>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>> locking
>>>> up during server tools setup on Internet Explorer 6.0 installtion. I
>>>> had a
>>>> reply saying it was probably due to an active internet connection.
>>>> Since
>>>> this i have installed a brand new harddrive and pulled the plug on the
>>>> router while attempting the setup. Again the initial part of the setup
>>>> is
>>>> fine, its when it gets to the actual server configuration. Its gets as
>>>> far
>>>> as installing server tools, the message says its doing internet
>>>> explorer
>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>> futher. A
>>>> look in the process list shows the setup process is just eating more
>>>> and
>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>
>>>> I searched the harddrive for what was growing as i was also loosing
>>>> harddrive space during this point. It turned out it was a log file
>>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>>> these
>>>> are
>>>>
>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>
>>>>
>>>> Ive got lots more logs, but i cant attach them as the message is too
>>>> big then. The only other thing that mmight be of use was the
>>>> errorlog.txt - this has the following in
>>>>
>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>> properly. Please relaunch via add remove programs or from CD.
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem while trying to set install action override: Microsoft
>>>> Exchange Messaging and Collaboration Services
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem while trying to set install action override: Microsoft
>>>> Exchange System Management Tools
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem while trying to set install action override: Microsoft
>>>> Exchange Domain Preparation
>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>> InstallProblem while trying to set install action override: Microsoft
>>>> Exchange Forest Preparation
>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
>>>> Updating Configuration
>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>> and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>>> component ID =
>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>> property name = (null)
>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>> and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
>>>> component ID =
>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>> property name = (null)
>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>> action id = 2
>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>> ISetupManager::LoadPersistantData()
>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>> ISetupManager::LoadPersistantData()
>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>> CPageBase::GetGlobalProperty(): GUID =
>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
>>>> container for [LDAP://CN=Internet Users,OU=Security
>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg
>>>> key is bogus, deleting...
>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>> 80070002
>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>> files for the Networking component. See C:\Program Files\Microsoft
>>>> Integration\Windows Small Business Server
>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>>> copied. You may want to run Setup again and reinstall the component.
>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>
>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>> C:\Program Files\Microsoft Windows Small Business
>>>> Server\ClientSetup\Clients [1]
>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>> C:\ClientApps [1]
>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>>>> with error [3].
>>>>
>>>>
>>>> Any help on this would be great.
>>>>
>>>>
>>>
>>>
>>
>
>

 

[Merv Porter [SBS-MVP]]

Re: Installation locks up eating memory

Do you install any additional software drivers during the base Windows 2003
install?
What is the make/model of server?
If generic server, what make/model of motherboard?

--
Merv Porter [SBS-MVP]
============================

"Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
news:%23DzaxAQ4IHA.4272@TK2MSFTNGP03.phx.gbl...
> OK to confirm, I have taken this back to a single 250gb (new low level
> formatted) disk - i havent done the raid yet as i wait until sbs is fully
> installed before doing this. It is when i continue with the SBS component
> install that this problem occurs.
>
>
> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
> news:%2368%23UrP4IHA.4908@TK2MSFTNGP04.phx.gbl...
>> Hi Adrian,
>>
>> Reformat both drives so they are back to "Basic" instead of "Dynamic".
>> Now unplug the secondary disk. Then reinstall SBS on the primary disk
>> starting with CD1. When the base Windows 2003 server is installed,
>> configure your partitions (if necessary) and the external NIC settings.
>> Do not make the disks dynamic yet. Now continue with the SBS component
>> install. When finished, run CEICW to set up the SBS components and make
>> sure all is well. Assuming everything completes properly, you can then
>> shut down, re-connect the secondary drive, boot and make the disks
>> dynamic. Then mirror them.
>>
>> CEICW Walkthrough
>> http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
>>
>> --
>> Merv Porter [SBS-MVP]
>> ============================
>>
>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>> news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
>>> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x 250gb
>>> SATA Harddrives on a software RAID. I havent got the rest of the
>>> details to hand at the moment. It is an internal CDROM, IDE. THe
>>> machine has 2 x NIC. One is connected to a live HUB and 1 is connected
>>> to the live ADSL router. Neither have any other device connected.
>>>
>>> Ive made a copy of CD3 onto a harddrive as i suspected this was the
>>> problem as its on cd 3 the error occurs. I can try and copy CD 1 as
>>> well to make sure. I havent tried using add/remove programs, i was
>>> forced to shut the server down with this problem and as such when i
>>> swithc on i tried to re-run 'continue setup' icon but it fails (i cant
>>> remmeber the exact message).
>>>
>>> Many Thanks
>>>
>>>
>>> Adrian
>>>
>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size, etc.)
>>>>
>>>> You siad you unplugged the router. Did you then connect one NIC into
>>>> the router and the other NIC into a live (powered on) switch/hub that
>>>> did not have any other devices connected to it?
>>>>
>>>> Are you using an internal CDROM for the SBS install?
>>>>
>>>> Does the SBS Setup complete if you go to Add/Remove programs and select
>>>> the Microsoft Windows Small Business Server 2003 item?
>>>>
>>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can
>>>> the entire contents of the CDs be read in another machine; I'm thinking
>>>> a CD problem here).
>>>>
>>>> --
>>>> Merv Porter [SBS-MVP]
>>>> ============================
>>>>
>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>>> Hi
>>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>>> locking
>>>>> up during server tools setup on Internet Explorer 6.0 installtion. I
>>>>> had a
>>>>> reply saying it was probably due to an active internet connection.
>>>>> Since
>>>>> this i have installed a brand new harddrive and pulled the plug on the
>>>>> router while attempting the setup. Again the initial part of the
>>>>> setup is
>>>>> fine, its when it gets to the actual server configuration. Its gets
>>>>> as far
>>>>> as installing server tools, the message says its doing internet
>>>>> explorer
>>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>>> futher. A
>>>>> look in the process list shows the setup process is just eating more
>>>>> and
>>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>>
>>>>> I searched the harddrive for what was growing as i was also loosing
>>>>> harddrive space during this point. It turned out it was a log file
>>>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>>>> these
>>>>> are
>>>>>
>>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>
>>>>>
>>>>> Ive got lots more logs, but i cant attach them as the message is too
>>>>> big then. The only other thing that mmight be of use was the
>>>>> errorlog.txt - this has the following in
>>>>>
>>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>>> properly. Please relaunch via add remove programs or from CD.
>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>> Exchange Messaging and Collaboration Services
>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>> Exchange System Management Tools
>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>> Exchange Domain Preparation
>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>> Exchange Forest Preparation
>>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on
>>>>> component: Updating Configuration
>>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>>> and Settings\Administrator\Local
>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>>> property name = (null)
>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>>> and Settings\Administrator\Local
>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>>> property name = (null)
>>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>>> action id = 2
>>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>> ISetupManager::LoadPersistantData()
>>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>> ISetupManager::LoadPersistantData()
>>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg
>>>>> key is bogus, deleting...
>>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>>> 80070002
>>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>>> files for the Networking component. See C:\Program Files\Microsoft
>>>>> Integration\Windows Small Business Server
>>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>>>> copied. You may want to run Setup again and reinstall the component.
>>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>>
>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>> Server\ClientSetup\Clients [1]
>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>> C:\ClientApps [1]
>>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs
>>>>> with error [3].
>>>>>
>>>>>
>>>>> Any help on this would be great.
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>

 

[Adrian Brown]

Re: Installation locks up eating memory

Ill try and get these details for you - The first time it happened I had
installed the internal NIC drivers, the second time I didnt do this, so I
only have the PCI NIC which was automatically installed during the windows
install.


"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
news:OHvnqtR4IHA.4272@TK2MSFTNGP03.phx.gbl...
> Do you install any additional software drivers during the base Windows
> 2003 install?
> What is the make/model of server?
> If generic server, what make/model of motherboard?
>
> --
> Merv Porter [SBS-MVP]
> ============================
>
> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
> news:%23DzaxAQ4IHA.4272@TK2MSFTNGP03.phx.gbl...
>> OK to confirm, I have taken this back to a single 250gb (new low level
>> formatted) disk - i havent done the raid yet as i wait until sbs is fully
>> installed before doing this. It is when i continue with the SBS
>> component install that this problem occurs.
>>
>>
>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>> news:%2368%23UrP4IHA.4908@TK2MSFTNGP04.phx.gbl...
>>> Hi Adrian,
>>>
>>> Reformat both drives so they are back to "Basic" instead of "Dynamic".
>>> Now unplug the secondary disk. Then reinstall SBS on the primary disk
>>> starting with CD1. When the base Windows 2003 server is installed,
>>> configure your partitions (if necessary) and the external NIC settings.
>>> Do not make the disks dynamic yet. Now continue with the SBS component
>>> install. When finished, run CEICW to set up the SBS components and
>>> make sure all is well. Assuming everything completes properly, you can
>>> then shut down, re-connect the secondary drive, boot and make the disks
>>> dynamic. Then mirror them.
>>>
>>> CEICW Walkthrough
>>> http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
>>>
>>> --
>>> Merv Porter [SBS-MVP]
>>> ============================
>>>
>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>> news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
>>>> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x
>>>> 250gb SATA Harddrives on a software RAID. I havent got the rest of the
>>>> details to hand at the moment. It is an internal CDROM, IDE. THe
>>>> machine has 2 x NIC. One is connected to a live HUB and 1 is connected
>>>> to the live ADSL router. Neither have any other device connected.
>>>>
>>>> Ive made a copy of CD3 onto a harddrive as i suspected this was the
>>>> problem as its on cd 3 the error occurs. I can try and copy CD 1 as
>>>> well to make sure. I havent tried using add/remove programs, i was
>>>> forced to shut the server down with this problem and as such when i
>>>> swithc on i tried to re-run 'continue setup' icon but it fails (i cant
>>>> remmeber the exact message).
>>>>
>>>> Many Thanks
>>>>
>>>>
>>>> Adrian
>>>>
>>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>>> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>>>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size,
>>>>> etc.)
>>>>>
>>>>> You siad you unplugged the router. Did you then connect one NIC into
>>>>> the router and the other NIC into a live (powered on) switch/hub that
>>>>> did not have any other devices connected to it?
>>>>>
>>>>> Are you using an internal CDROM for the SBS install?
>>>>>
>>>>> Does the SBS Setup complete if you go to Add/Remove programs and
>>>>> select the Microsoft Windows Small Business Server 2003 item?
>>>>>
>>>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can
>>>>> the entire contents of the CDs be read in another machine; I'm
>>>>> thinking a CD problem here).
>>>>>
>>>>> --
>>>>> Merv Porter [SBS-MVP]
>>>>> ============================
>>>>>
>>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>>>> Hi
>>>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>>>> locking
>>>>>> up during server tools setup on Internet Explorer 6.0 installtion. I
>>>>>> had a
>>>>>> reply saying it was probably due to an active internet connection.
>>>>>> Since
>>>>>> this i have installed a brand new harddrive and pulled the plug on
>>>>>> the
>>>>>> router while attempting the setup. Again the initial part of the
>>>>>> setup is
>>>>>> fine, its when it gets to the actual server configuration. Its gets
>>>>>> as far
>>>>>> as installing server tools, the message says its doing internet
>>>>>> explorer
>>>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>>>> futher. A
>>>>>> look in the process list shows the setup process is just eating more
>>>>>> and
>>>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>>>
>>>>>> I searched the harddrive for what was growing as i was also loosing
>>>>>> harddrive space during this point. It turned out it was a log file
>>>>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>>>>> these
>>>>>> are
>>>>>>
>>>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>
>>>>>>
>>>>>> Ive got lots more logs, but i cant attach them as the message is too
>>>>>> big then. The only other thing that mmight be of use was the
>>>>>> errorlog.txt - this has the following in
>>>>>>
>>>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>>>> properly. Please relaunch via add remove programs or from CD.
>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>>> Exchange Messaging and Collaboration Services
>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>>> Exchange System Management Tools
>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>>> Exchange Domain Preparation
>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>> InstallProblem while trying to set install action override: Microsoft
>>>>>> Exchange Forest Preparation
>>>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on
>>>>>> component: Updating Configuration
>>>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>>>> and Settings\Administrator\Local
>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>>>> property name = (null)
>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>>> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents
>>>>>> and Settings\Administrator\Local
>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>>>> property name = (null)
>>>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>>>> action id = 2
>>>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>> ISetupManager::LoadPersistantData()
>>>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>> ISetupManager::LoadPersistantData()
>>>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg
>>>>>> key is bogus, deleting...
>>>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>>>> 80070002
>>>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>>>> files for the Networking component. See C:\Program Files\Microsoft
>>>>>> Integration\Windows Small Business Server
>>>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not
>>>>>> copied. You may want to run Setup again and reinstall the component.
>>>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>>>
>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>> Server\ClientSetup\Clients [1]
>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>> C:\ClientApps [1]
>>>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service
>>>>>> packs with error [3].
>>>>>>
>>>>>>
>>>>>> Any help on this would be great.
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

 

[Adrian Brown]

Re: Installation locks up eating memory

Its a Dell PowerEdge SC430 server


"Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
news:%23vBjvCS4IHA.1196@TK2MSFTNGP05.phx.gbl...
> Ill try and get these details for you - The first time it happened I had
> installed the internal NIC drivers, the second time I didnt do this, so I
> only have the PCI NIC which was automatically installed during the windows
> install.
>
>
> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
> news:OHvnqtR4IHA.4272@TK2MSFTNGP03.phx.gbl...
>> Do you install any additional software drivers during the base Windows
>> 2003 install?
>> What is the make/model of server?
>> If generic server, what make/model of motherboard?
>>
>> --
>> Merv Porter [SBS-MVP]
>> ============================
>>
>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>> news:%23DzaxAQ4IHA.4272@TK2MSFTNGP03.phx.gbl...
>>> OK to confirm, I have taken this back to a single 250gb (new low level
>>> formatted) disk - i havent done the raid yet as i wait until sbs is
>>> fully installed before doing this. It is when i continue with the SBS
>>> component install that this problem occurs.
>>>
>>>
>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>> news:%2368%23UrP4IHA.4908@TK2MSFTNGP04.phx.gbl...
>>>> Hi Adrian,
>>>>
>>>> Reformat both drives so they are back to "Basic" instead of "Dynamic".
>>>> Now unplug the secondary disk. Then reinstall SBS on the primary disk
>>>> starting with CD1. When the base Windows 2003 server is installed,
>>>> configure your partitions (if necessary) and the external NIC settings.
>>>> Do not make the disks dynamic yet. Now continue with the SBS component
>>>> install. When finished, run CEICW to set up the SBS components and
>>>> make sure all is well. Assuming everything completes properly, you can
>>>> then shut down, re-connect the secondary drive, boot and make the disks
>>>> dynamic. Then mirror them.
>>>>
>>>> CEICW Walkthrough
>>>> http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
>>>>
>>>> --
>>>> Merv Porter [SBS-MVP]
>>>> ============================
>>>>
>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>> news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
>>>>> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x
>>>>> 250gb SATA Harddrives on a software RAID. I havent got the rest of
>>>>> the details to hand at the moment. It is an internal CDROM, IDE. THe
>>>>> machine has 2 x NIC. One is connected to a live HUB and 1 is connected
>>>>> to the live ADSL router. Neither have any other device connected.
>>>>>
>>>>> Ive made a copy of CD3 onto a harddrive as i suspected this was the
>>>>> problem as its on cd 3 the error occurs. I can try and copy CD 1 as
>>>>> well to make sure. I havent tried using add/remove programs, i was
>>>>> forced to shut the server down with this problem and as such when i
>>>>> swithc on i tried to re-run 'continue setup' icon but it fails (i cant
>>>>> remmeber the exact message).
>>>>>
>>>>> Many Thanks
>>>>>
>>>>>
>>>>> Adrian
>>>>>
>>>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>>>> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>>>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>>>>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size,
>>>>>> etc.)
>>>>>>
>>>>>> You siad you unplugged the router. Did you then connect one NIC into
>>>>>> the router and the other NIC into a live (powered on) switch/hub that
>>>>>> did not have any other devices connected to it?
>>>>>>
>>>>>> Are you using an internal CDROM for the SBS install?
>>>>>>
>>>>>> Does the SBS Setup complete if you go to Add/Remove programs and
>>>>>> select the Microsoft Windows Small Business Server 2003 item?
>>>>>>
>>>>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e., can
>>>>>> the entire contents of the CDs be read in another machine; I'm
>>>>>> thinking a CD problem here).
>>>>>>
>>>>>> --
>>>>>> Merv Porter [SBS-MVP]
>>>>>> ============================
>>>>>>
>>>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>>>>> Hi
>>>>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>>>>> locking
>>>>>>> up during server tools setup on Internet Explorer 6.0 installtion.
>>>>>>> I had a
>>>>>>> reply saying it was probably due to an active internet connection.
>>>>>>> Since
>>>>>>> this i have installed a brand new harddrive and pulled the plug on
>>>>>>> the
>>>>>>> router while attempting the setup. Again the initial part of the
>>>>>>> setup is
>>>>>>> fine, its when it gets to the actual server configuration. Its gets
>>>>>>> as far
>>>>>>> as installing server tools, the message says its doing internet
>>>>>>> explorer
>>>>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>>>>> futher. A
>>>>>>> look in the process list shows the setup process is just eating more
>>>>>>> and
>>>>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>>>>
>>>>>>> I searched the harddrive for what was growing as i was also loosing
>>>>>>> harddrive space during this point. It turned out it was a log file
>>>>>>> (eventlog.txt) it keeps adding the same lines over and over again -
>>>>>>> these
>>>>>>> are
>>>>>>>
>>>>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>
>>>>>>>
>>>>>>> Ive got lots more logs, but i cant attach them as the message is too
>>>>>>> big then. The only other thing that mmight be of use was the
>>>>>>> errorlog.txt - this has the following in
>>>>>>>
>>>>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>>>>> properly. Please relaunch via add remove programs or from CD.
>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>> InstallProblem while trying to set install action override:
>>>>>>> Microsoft Exchange Messaging and Collaboration Services
>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>> InstallProblem while trying to set install action override:
>>>>>>> Microsoft Exchange System Management Tools
>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>> InstallProblem while trying to set install action override:
>>>>>>> Microsoft Exchange Domain Preparation
>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>> InstallProblem while trying to set install action override:
>>>>>>> Microsoft Exchange Forest Preparation
>>>>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on
>>>>>>> component: Updating Configuration
>>>>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>>>> ISetupManager::LoadPersistantComponentData(): filename =
>>>>>>> C:\Documents and Settings\Administrator\Local
>>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>>>>> property name = (null)
>>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>>> ISetupDataFile::GetPropertyValue() failed for account information in
>>>>>>> ISetupManager::LoadPersistantComponentData(): filename =
>>>>>>> C:\Documents and Settings\Administrator\Local
>>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>>>>> property name = (null)
>>>>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>>>>> action id = 2
>>>>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>>> ISetupManager::LoadPersistantData()
>>>>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>>> ISetupManager::LoadPersistantData()
>>>>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring
>>>>>>> reg key is bogus, deleting...
>>>>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>>>>> 80070002
>>>>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>>>>> files for the Networking component. See C:\Program Files\Microsoft
>>>>>>> Integration\Windows Small Business Server
>>>>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were
>>>>>>> not copied. You may want to run Setup again and reinstall the
>>>>>>> component.
>>>>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>>>>
>>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>> Server\ClientSetup\Clients [1]
>>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>>> C:\ClientApps [1]
>>>>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service
>>>>>>> packs with error [3].
>>>>>>>
>>>>>>>
>>>>>>> Any help on this would be great.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>

 

[Merv Porter [SBS-MVP]]

Re: Installation locks up eating memory

Are you using the Dell Server Assistant CD to install SBS 2003? If not,
please try it. It will add all the appropriate drivers for you and make
your install easier.

Dell PE430
http://www.dell.com/downloads/global/products/pedge/en/sc430_specs.pdf

--
Merv Porter [SBS-MVP]
============================

"Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
news:u1GZ9Fd4IHA.4260@TK2MSFTNGP06.phx.gbl...
> Its a Dell PowerEdge SC430 server
>
>
> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
> news:%23vBjvCS4IHA.1196@TK2MSFTNGP05.phx.gbl...
>> Ill try and get these details for you - The first time it happened I had
>> installed the internal NIC drivers, the second time I didnt do this, so I
>> only have the PCI NIC which was automatically installed during the
>> windows install.
>>
>>
>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>> news:OHvnqtR4IHA.4272@TK2MSFTNGP03.phx.gbl...
>>> Do you install any additional software drivers during the base Windows
>>> 2003 install?
>>> What is the make/model of server?
>>> If generic server, what make/model of motherboard?
>>>
>>> --
>>> Merv Porter [SBS-MVP]
>>> ============================
>>>
>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>> news:%23DzaxAQ4IHA.4272@TK2MSFTNGP03.phx.gbl...
>>>> OK to confirm, I have taken this back to a single 250gb (new low level
>>>> formatted) disk - i havent done the raid yet as i wait until sbs is
>>>> fully installed before doing this. It is when i continue with the SBS
>>>> component install that this problem occurs.
>>>>
>>>>
>>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>>> news:%2368%23UrP4IHA.4908@TK2MSFTNGP04.phx.gbl...
>>>>> Hi Adrian,
>>>>>
>>>>> Reformat both drives so they are back to "Basic" instead of "Dynamic".
>>>>> Now unplug the secondary disk. Then reinstall SBS on the primary disk
>>>>> starting with CD1. When the base Windows 2003 server is installed,
>>>>> configure your partitions (if necessary) and the external NIC
>>>>> settings. Do not make the disks dynamic yet. Now continue with the
>>>>> SBS component install. When finished, run CEICW to set up the SBS
>>>>> components and make sure all is well. Assuming everything completes
>>>>> properly, you can then shut down, re-connect the secondary drive, boot
>>>>> and make the disks dynamic. Then mirror them.
>>>>>
>>>>> CEICW Walkthrough
>>>>> http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
>>>>>
>>>>> --
>>>>> Merv Porter [SBS-MVP]
>>>>> ============================
>>>>>
>>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>>> news:%235DTufP4IHA.2580@TK2MSFTNGP06.phx.gbl...
>>>>>> Hi, Thanks for you reply. Its a Dell Poweredge server, 1GB Ram 2x
>>>>>> 250gb SATA Harddrives on a software RAID. I havent got the rest of
>>>>>> the details to hand at the moment. It is an internal CDROM, IDE.
>>>>>> THe machine has 2 x NIC. One is connected to a live HUB and 1 is
>>>>>> connected to the live ADSL router. Neither have any other device
>>>>>> connected.
>>>>>>
>>>>>> Ive made a copy of CD3 onto a harddrive as i suspected this was the
>>>>>> problem as its on cd 3 the error occurs. I can try and copy CD 1 as
>>>>>> well to make sure. I havent tried using add/remove programs, i was
>>>>>> forced to shut the server down with this problem and as such when i
>>>>>> swithc on i tried to re-run 'continue setup' icon but it fails (i
>>>>>> cant remmeber the exact message).
>>>>>>
>>>>>> Many Thanks
>>>>>>
>>>>>>
>>>>>> Adrian
>>>>>>
>>>>>> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
>>>>>> news:OOv0bDP4IHA.3396@TK2MSFTNGP02.phx.gbl...
>>>>>>> What are the specs for the server? (mfg/model of Motherboard, RAID,
>>>>>>> amount of RAM, type of disks [EIDE, SCIS, SATA], hard drive size,
>>>>>>> etc.)
>>>>>>>
>>>>>>> You siad you unplugged the router. Did you then connect one NIC
>>>>>>> into the router and the other NIC into a live (powered on)
>>>>>>> switch/hub that did not have any other devices connected to it?
>>>>>>>
>>>>>>> Are you using an internal CDROM for the SBS install?
>>>>>>>
>>>>>>> Does the SBS Setup complete if you go to Add/Remove programs and
>>>>>>> select the Microsoft Windows Small Business Server 2003 item?
>>>>>>>
>>>>>>> Can you make a copy of the CD1 and CD3 using a CDRW drive? (i.e.,
>>>>>>> can the entire contents of the CDs be read in another machine; I'm
>>>>>>> thinking a CD problem here).
>>>>>>>
>>>>>>> --
>>>>>>> Merv Porter [SBS-MVP]
>>>>>>> ============================
>>>>>>>
>>>>>>> "Adrian Brown" <adrian@apbcomputerservices.co.uk> wrote in message
>>>>>>> news:%23zHCtGO4IHA.5012@TK2MSFTNGP02.phx.gbl...
>>>>>>>> Hi
>>>>>>>> I posted a few days ago about a problem with SBS2003 fresh install
>>>>>>>> locking
>>>>>>>> up during server tools setup on Internet Explorer 6.0 installtion.
>>>>>>>> I had a
>>>>>>>> reply saying it was probably due to an active internet connection.
>>>>>>>> Since
>>>>>>>> this i have installed a brand new harddrive and pulled the plug on
>>>>>>>> the
>>>>>>>> router while attempting the setup. Again the initial part of the
>>>>>>>> setup is
>>>>>>>> fine, its when it gets to the actual server configuration. Its
>>>>>>>> gets as far
>>>>>>>> as installing server tools, the message says its doing internet
>>>>>>>> explorer
>>>>>>>> 6.0. Ive left it at this point for several hours and it gets no
>>>>>>>> futher. A
>>>>>>>> look in the process list shows the setup process is just eating
>>>>>>>> more and
>>>>>>>> more memory. After a few hours it was up past 1gb of memory.
>>>>>>>>
>>>>>>>> I searched the harddrive for what was growing as i was also loosing
>>>>>>>> harddrive space during this point. It turned out it was a log file
>>>>>>>> (eventlog.txt) it keeps adding the same lines over and over
>>>>>>>> again - these
>>>>>>>> are
>>>>>>>>
>>>>>>>> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
>>>>>>>> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>>>>>>>>
>>>>>>>>
>>>>>>>> Ive got lots more logs, but i cant attach them as the message is
>>>>>>>> too big then. The only other thing that mmight be of use was the
>>>>>>>> errorlog.txt - this has the following in
>>>>>>>>
>>>>>>>> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
>>>>>>>> properly. Please relaunch via add remove programs or from CD.
>>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>>> InstallProblem while trying to set install action override:
>>>>>>>> Microsoft Exchange Messaging and Collaboration Services
>>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>>> InstallProblem while trying to set install action override:
>>>>>>>> Microsoft Exchange System Management Tools
>>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>>> InstallProblem while trying to set install action override:
>>>>>>>> Microsoft Exchange Domain Preparation
>>>>>>>> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an
>>>>>>>> InstallProblem while trying to set install action override:
>>>>>>>> Microsoft Exchange Forest Preparation
>>>>>>>> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on
>>>>>>>> component: Updating Configuration
>>>>>>>> [07/04/08,08:38:00] WizardUI: [2]
>>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>>> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
>>>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>>>> ISetupDataFile::GetPropertyValue() failed for account information
>>>>>>>> in ISetupManager::LoadPersistantComponentData(): filename =
>>>>>>>> C:\Documents and Settings\Administrator\Local
>>>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
>>>>>>>> property name = (null)
>>>>>>>> [07/04/08,08:44:40] Microsoft Integration: [2]
>>>>>>>> ISetupDataFile::GetPropertyValue() failed for account information
>>>>>>>> in ISetupManager::LoadPersistantComponentData(): filename =
>>>>>>>> C:\Documents and Settings\Administrator\Local
>>>>>>>> Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID =
>>>>>>>> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
>>>>>>>> property name = (null)
>>>>>>>> [07/04/08,08:44:41] Microsoft Integration: [2]
>>>>>>>> ISetupComponent::SetInstallActionByUniqueID() failed in
>>>>>>>> ISetupManager::LoadPersistantComponentData(): component name =
>>>>>>>> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
>>>>>>>> action id = 2
>>>>>>>> [07/04/08,08:44:41] setup.exe: [2]
>>>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>>>> ISetupManager::LoadPersistantData()
>>>>>>>> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
>>>>>>>> [07/04/08,08:44:42] setup.exe: [2]
>>>>>>>> ISetupManager::AddGlobalCustomProperty failed in
>>>>>>>> ISetupManager::LoadPersistantData()
>>>>>>>> ({c248d3e3-632d-4435-888a-83035c144737})
>>>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>>>> [07/04/08,08:48:04] WizardUI: [2]
>>>>>>>> ISetupManager::GetGlobalCustomProperty() failed in
>>>>>>>> CPageBase::GetGlobalProperty(): GUID =
>>>>>>>> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
>>>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>>> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get
>>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>>> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get
>>>>>>>> group container for [LDAP://CN=Internet Users,OU=Security
>>>>>>>> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
>>>>>>>> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring
>>>>>>>> reg key is bogus, deleting...
>>>>>>>> [07/04/08,09:20:18] Monitoring: [2]
>>>>>>>> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with
>>>>>>>> 80070002
>>>>>>>> [07/04/08,09:22:04] Networking: [2] An error occurred while copying
>>>>>>>> files for the Networking component. See C:\Program Files\Microsoft
>>>>>>>> Integration\Windows Small Business Server
>>>>>>>> 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were
>>>>>>>> not copied. You may want to run Setup again and reinstall the
>>>>>>>> component.
>>>>>>>> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
>>>>>>>> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>>>>>>>>
>>>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>>> Server\ClientSetup\Clients [1]
>>>>>>>> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
>>>>>>>> C:\ClientApps [1]
>>>>>>>> [07/04/08,09:27:00] Client Deployment: [2] Error copying service
>>>>>>>> packs with error [3].
>>>>>>>>
>>>>>>>>
>>>>>>>> Any help on this would be great.
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>

 

[netwod]

RE: Installation locks up eating memory

I am receiving the exact same problem as reported here a few weeks ago, and I
could not see that an answer was provided.
In my case this is a new SBS2003 SP1 installation on a new HP ML110 server
with two U320 SCSI 72GB disks (2.5GB RAM).

There is no error message on the screen, the process just seems to have
hung. But, for two hours now, the eventlog.txt has been recording
Setup.exe:GetcustomProperties, while the errorlog.txt recorded the message
noted by Adrian Brown :"Client Deployment: [2] Failed to set DACL to
C:\ClientApps[1] at the same time as the eventlog.txt started recording the
other message.

Mine is still stuck at the installing Internet Explorer 6 with CD3 in the
drive. Does anybody have an idea how to get around this?

Jerome

"Adrian Brown" wrote:

> Hi
> I posted a few days ago about a problem with SBS2003 fresh install locking
> up during server tools setup on Internet Explorer 6.0 installtion. I had a
> reply saying it was probably due to an active internet connection. Since
> this i have installed a brand new harddrive and pulled the plug on the
> router while attempting the setup. Again the initial part of the setup is
> fine, its when it gets to the actual server configuration. Its gets as far
> as installing server tools, the message says its doing internet explorer
> 6.0. Ive left it at this point for several hours and it gets no futher. A
> look in the process list shows the setup process is just eating more and
> more memory. After a few hours it was up past 1gb of memory.
>
> I searched the harddrive for what was growing as i was also loosing
> harddrive space during this point. It turned out it was a log file
> (eventlog.txt) it keeps adding the same lines over and over again - these
> are
>
> [07/04/08,09:37:38] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:38] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
> [07/04/08,09:37:39] Setup.exe: GetCustomProperties()
> [07/04/08,09:37:39] Setup.exe: get_CustomProperties()
>
>
> Ive got lots more logs, but i cant attach them as the message is too big
> then. The only other thing that mmight be of use was the errorlog.txt -
> this has the following in
>
> [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work
> properly. Please relaunch via add remove programs or from CD.
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Messaging
> and Collaboration Services
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange System
> Management Tools
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Domain
> Preparation
> [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem
> while trying to set install action override: Microsoft Exchange Forest
> Preparation
> [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component:
> Updating Configuration
> [07/04/08,08:38:00] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
> [07/04/08,08:44:40] Microsoft Integration: [2]
> ISetupDataFile::GetPropertyValue() failed for account information in
> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
> component ID =
> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2},
> property name = (null)
> [07/04/08,08:44:40] Microsoft Integration: [2]
> ISetupDataFile::GetPropertyValue() failed for account information in
> ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and
> Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI,
> component ID =
> {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8},
> property name = (null)
> [07/04/08,08:44:41] Microsoft Integration: [2]
> ISetupComponent::SetInstallActionByUniqueID() failed in
> ISetupManager::LoadPersistantComponentData(): component name =
> {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D},
> action id = 2
> [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
> failed in ISetupManager::LoadPersistantData()
> ({df8ff64a-1967-4871-9e32-ca2f819bab81})
> [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty
> failed in ISetupManager::LoadPersistantData()
> ({c248d3e3-632d-4435-888a-83035c144737})
> [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
> [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty()
> failed in CPageBase::GetGlobalProperty(): GUID =
> {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group
> container for [LDAP://CN=Internet Users,OU=Security
> Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local]
> [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key is
> bogus, deleting...
> [07/04/08,09:20:18] Monitoring: [2]
> RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002
> [07/04/08,09:22:04] Networking: [2] An error occurred while copying files
> for the Networking component. See C:\Program Files\Microsoft
> Integration\Windows Small Business Server 2003\Logs\SBSMSI-Connectivity.LOG
> for the list of files that were not copied. You may want to run Setup again
> and reinstall the component.
> [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in
> CClientX::HrGetSTSVersion. This is a clean install of ClientX.
>
> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\Program
> Files\Microsoft Windows Small Business Server\ClientSetup\Clients [1]
> [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to
> C:\ClientApps [1]
> [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs with
> error [3].
>
>
> Any help on this would be great.
>
>
>