Cannot install Windows XP Prof x64

[netexpert]

I give you more info. New PC boots-up from CD-DVD, and in the beginning was
giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050 (OXFFFFFADF))60A180
..... but now hangs forever in "Setup is starting Windows". Any help will be
greatly appreciated. In exchange I will help you with any IT support I could.
Just email me to itsupport@complaser.com. Thank you in advance,

 

[Colin Barnhorst]

Re: Cannot install Windows XP Prof x64

"netexpert" <netexpert@discussions.microsoft.com> wrote in message
news:6258E019-C4BC-4112-8ED6-F4F1F798D2CF@microsoft.com...
>I give you more info. New PC boots-up from CD-DVD, and in the beginning was
> giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050
> (OXFFFFFADF))60A180
> .... but now hangs forever in "Setup is starting Windows". Any help will
> be
> greatly appreciated. In exchange I will help you with any IT support I
> could.
> Just email me to itsupport@complaser.com. Thank you in advance,


Please do not start new threads with each update. Reply to your own thread.
Please read my response to your first post. Generally, replies are made to
the newsgroup so that others following the thread may benefit from the
discussions and the resolution.

 

[Carlos]

RE: Cannot install Windows XP Prof x64

Hi,
This KB
http://support.microsoft.com/kb/315335/en-us
describes your PAGE_FAULT (etc.) error.
It is for XP 32-bit but might as well apply to your case.
Carlos

"netexpert" wrote:

> I give you more info. New PC boots-up from CD-DVD, and in the beginning was
> giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050 (OXFFFFFADF))60A180
> .... but now hangs forever in "Setup is starting Windows". Any help will be
> greatly appreciated. In exchange I will help you with any IT support I could.
> Just email me to itsupport@complaser.com. Thank you in advance,

 

[Colin Barnhorst]

Re: Cannot install Windows XP Prof x64

"netexpert" <netexpert@discussions.microsoft.com> wrote in message
news:6258E019-C4BC-4112-8ED6-F4F1F798D2CF@microsoft.com...
>I give you more info. New PC boots-up from CD-DVD, and in the beginning was
> giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050
> (OXFFFFFADF))60A180
> .... but now hangs forever in "Setup is starting Windows". Any help will
> be
> greatly appreciated. In exchange I will help you with any IT support I
> could.
> Just email me to itsupport@complaser.com. Thank you in advance,


Try installing with 2 sticks of ram and reduce your dram speed to 667. You
may not be able to run 8GB of ram at 800. Check the forum for your mobo on
the mfg's website for what other users are doing. Just because a mobo is
speced for 8GB and just because it supports 800 ram does NOT mean it
supports 8GB at 800.

 

[netexpert]

Re: Cannot install Windows XP Prof x64

Colin,

First at all I would like to thank you for your help. I do appreciate your
time and knowledge.

It's fixed. Originally I purchased * GB (4x2) "This memory has been verified
to operate at 800MHz at the low latencies of 5-5-5-18. Corsair's line of 4GB
memory kits are designed for PCs featuring 64-bit operating systems."
The Intel mobo did not support this latency. It worked just fine with
Kingston PC-6400 800 mhz 8GB (4x2) latency (yes) 4-4-4-12 with Intel mobo
DG35EC.

After this, installation was completed.

Thank you again.

"Colin Barnhorst" wrote:

> "netexpert" <netexpert@discussions.microsoft.com> wrote in message
> news:6258E019-C4BC-4112-8ED6-F4F1F798D2CF@microsoft.com...
> >I give you more info. New PC boots-up from CD-DVD, and in the beginning was
> > giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050
> > (OXFFFFFADF))60A180
> > .... but now hangs forever in "Setup is starting Windows". Any help will
> > be
> > greatly appreciated. In exchange I will help you with any IT support I
> > could.
> > Just email me to itsupport@complaser.com. Thank you in advance,
>
>
> Try installing with 2 sticks of ram and reduce your dram speed to 667. You
> may not be able to run 8GB of ram at 800. Check the forum for your mobo on
> the mfg's website for what other users are doing. Just because a mobo is
> speced for 8GB and just because it supports 800 ram does NOT mean it
> supports 8GB at 800.
>

 

[Colin Barnhorst]

Re: Cannot install Windows XP Prof x64

"netexpert" <netexpert@discussions.microsoft.com> wrote in message
news02EEEA1-0B88-4DE8-B2E4-4595B5216369@microsoft.com...
> Colin,
>
> First at all I would like to thank you for your help. I do appreciate your
> time and knowledge.
>
> It's fixed. Originally I purchased * GB (4x2) "This memory has been
> verified
> to operate at 800MHz at the low latencies of 5-5-5-18. Corsair's line of
> 4GB
> memory kits are designed for PCs featuring 64-bit operating systems."
> The Intel mobo did not support this latency. It worked just fine with
> Kingston PC-6400 800 mhz 8GB (4x2) latency (yes) 4-4-4-12 with Intel mobo
> DG35EC.
>
> After this, installation was completed.
>
> Thank you again.
>
> "Colin Barnhorst" wrote:
>
>> "netexpert" <netexpert@discussions.microsoft.com> wrote in message
>> news:6258E019-C4BC-4112-8ED6-F4F1F798D2CF@microsoft.com...
>> >I give you more info. New PC boots-up from CD-DVD, and in the beginning
>> >was
>> > giving error: PAGE_FAULT_IN_NONPAGED_AREA Stop 0X00000050
>> > (OXFFFFFADF))60A180
>> > .... but now hangs forever in "Setup is starting Windows". Any help
>> > will
>> > be
>> > greatly appreciated. In exchange I will help you with any IT support I
>> > could.
>> > Just email me to itsupport@complaser.com. Thank you in advance,
>>
>>
>> Try installing with 2 sticks of ram and reduce your dram speed to 667.
>> You
>> may not be able to run 8GB of ram at 800. Check the forum for your mobo
>> on
>> the mfg's website for what other users are doing. Just because a mobo is
>> speced for 8GB and just because it supports 800 ram does NOT mean it
>> supports 8GB at 800.
>>

You're welcome.