Hyper-V can not start new VM

  • Thread starter Thread starter MarcusB
  • Start date Start date
M

MarcusB

Guest
We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V RTM
yesterday. All old VM are working but I can not start a new one. After
creating new Virtual Machine when we try to start it we are getting error:
"An error accurred while attempting to change the state of virtual machine
Filed to create memory contents"

Any suggestions?

MarcusB
 
Re: Hyper-V can not start new VM

Hello MarcusB,

Did you follow this steps also with all additional patches?
http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.aspx

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
> RTM yesterday. All old VM are working but I can not start a new one.
> After creating new Virtual Machine when we try to start it we are
> getting error: "An error accurred while attempting to change the state
> of virtual machine Filed to create memory contents"
>
> Any suggestions?
>
> MarcusB
>
 
Re: Hyper-V can not start new VM

Yes I followed the instruction. I installed KB950050, but there is
nothing about patches.
The old VM are working, I can not add the new ones (start)

MarcusB
Meinolf Weber wrote:
> Hello MarcusB,
>
> Did you follow this steps also with all additional patches?
> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.aspx
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
>> RTM yesterday. All old VM are working but I can not start a new one.
>> After creating new Virtual Machine when we try to start it we are
>> getting error: "An error accurred while attempting to change the state
>> of virtual machine Filed to create memory contents"
>>
>> Any suggestions?
>>
>> MarcusB
>>
>
>
 
Re: Hyper-V can not start new VM

Hello MarcusB,

Do you run TrendMicro or Forefront on the server?
http://forums.technet.microsoft.com/en/winserverhyperv/thread/fc3a5724-5dc2-44ea-83db-9b7fd8b8eade/

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Yes I followed the instruction. I installed KB950050, but there is
> nothing about patches.
> The old VM are working, I can not add the new ones (start)
> MarcusB
> Meinolf Weber wrote:
>> Hello MarcusB,
>>
>> Did you follow this steps also with all additional patches?
>> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.aspx
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
>>> RTM yesterday. All old VM are working but I can not start a new one.
>>> After creating new Virtual Machine when we try to start it we are
>>> getting error: "An error accurred while attempting to change the
>>> state
>>> of virtual machine Filed to create memory contents"
>>> Any suggestions?
>>>
>>> MarcusB
>>>
 
Re: Hyper-V can not start new VM

I tried to create new VM in default folders on drive C and than it
works, but if I create VM on the same drive where my old VM are than I
can not start new virtual machines, and I am geting the error I
described. It seems that Hyper-v can not create or write to files or
folders, but it could before update.
I checked the rights and I can not figure out why is like this.

MarcusB
Meinolf Weber wrote:
> Hello MarcusB,
>
> Do you run TrendMicro or Forefront on the server?
> http://forums.technet.microsoft.com/en/winserverhyperv/thread/fc3a5724-5dc2-44ea-83db-9b7fd8b8eade/
>
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Yes I followed the instruction. I installed KB950050, but there is
>> nothing about patches.
>> The old VM are working, I can not add the new ones (start)
>> MarcusB
>> Meinolf Weber wrote:
>>> Hello MarcusB,
>>>
>>> Did you follow this steps also with all additional patches?
>>> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.aspx
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
>>>> RTM yesterday. All old VM are working but I can not start a new one.
>>>> After creating new Virtual Machine when we try to start it we are
>>>> getting error: "An error accurred while attempting to change the
>>>> state
>>>> of virtual machine Filed to create memory contents"
>>>> Any suggestions?
>>>>
>>>> MarcusB
>>>>
>
>
 
Re: Hyper-V can not start new VM

Hello MarcusB,

Did you also checck the rights on the %PROGRAMDATA%\Microsoft\Windows\Hyper-V\Virtual
Machines folder where also some config files are located?

Additional i would post to:
microsoft.public.virtualserver
microsoft.public.virtualpc

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I tried to create new VM in default folders on drive C and than it
> works, but if I create VM on the same drive where my old VM are than I
> can not start new virtual machines, and I am geting the error I
> described. It seems that Hyper-v can not create or write to files or
> folders, but it could before update.
> I checked the rights and I can not figure out why is like this.
> MarcusB
> Meinolf Weber wrote:
>> Hello MarcusB,
>>
>> Do you run TrendMicro or Forefront on the server?
>> http://forums.technet.microsoft.com/en/winserverhyperv/thread/fc3a572
>> 4-5dc2-44ea-83db-9b7fd8b8eade/
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Yes I followed the instruction. I installed KB950050, but there is
>>> nothing about patches.
>>> The old VM are working, I can not add the new ones (start)
>>> MarcusB
>>> Meinolf Weber wrote:
>>>> Hello MarcusB,
>>>>
>>>> Did you follow this steps also with all additional patches?
>>>> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.asp
>>>> x
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
>>>>> RTM yesterday. All old VM are working but I can not start a new
>>>>> one.
>>>>> After creating new Virtual Machine when we try to start it we are
>>>>> getting error: "An error accurred while attempting to change the
>>>>> state
>>>>> of virtual machine Filed to create memory contents"
>>>>> Any suggestions?
>>>>> MarcusB
>>>>>
 
Re: Hyper-V can not start new VM

The problem solved. Disk quota was limiting the Hyper-V owner to create
biger files


MarcusB
Meinolf Weber wrote:
> Hello MarcusB,
>
> Did you also checck the rights on the
> %PROGRAMDATA%\Microsoft\Windows\Hyper-V\Virtual Machines folder where
> also some config files are located?
> Additional i would post to:
> microsoft.public.virtualserver
> microsoft.public.virtualpc
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> I tried to create new VM in default folders on drive C and than it
>> works, but if I create VM on the same drive where my old VM are than I
>> can not start new virtual machines, and I am geting the error I
>> described. It seems that Hyper-v can not create or write to files or
>> folders, but it could before update.
>> I checked the rights and I can not figure out why is like this.
>> MarcusB
>> Meinolf Weber wrote:
>>> Hello MarcusB,
>>>
>>> Do you run TrendMicro or Forefront on the server?
>>> http://forums.technet.microsoft.com/en/winserverhyperv/thread/fc3a572
>>> 4-5dc2-44ea-83db-9b7fd8b8eade/
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>> Yes I followed the instruction. I installed KB950050, but there is
>>>> nothing about patches.
>>>> The old VM are working, I can not add the new ones (start)
>>>> MarcusB
>>>> Meinolf Weber wrote:
>>>>> Hello MarcusB,
>>>>>
>>>>> Did you follow this steps also with all additional patches?
>>>>> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.asp
>>>>> x
>>>>>
>>>>> Best regards
>>>>>
>>>>> Meinolf Weber
>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>> and
>>>>> confers no rights.
>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>> We had Hyper-V RC1 with 2 Virtual machines. We updated to Hyper-V
>>>>>> RTM yesterday. All old VM are working but I can not start a new
>>>>>> one.
>>>>>> After creating new Virtual Machine when we try to start it we are
>>>>>> getting error: "An error accurred while attempting to change the
>>>>>> state
>>>>>> of virtual machine Filed to create memory contents"
>>>>>> Any suggestions?
>>>>>> MarcusB
>>>>>>
>
>
 
Re: Hyper-V can not start new VM

Hello MarcusB,

Thanks for the feedback, nice that you find it out.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> The problem solved. Disk quota was limiting the Hyper-V owner to
> create biger files
>
> MarcusB
> Meinolf Weber wrote:
>> Hello MarcusB,
>>
>> Did you also checck the rights on the
>> %PROGRAMDATA%\Microsoft\Windows\Hyper-V\Virtual Machines folder where
>> also some config files are located?
>> Additional i would post to:
>> microsoft.public.virtualserver
>> microsoft.public.virtualpc
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I tried to create new VM in default folders on drive C and than it
>>> works, but if I create VM on the same drive where my old VM are than
>>> I
>>> can not start new virtual machines, and I am geting the error I
>>> described. It seems that Hyper-v can not create or write to files
>>> or
>>> folders, but it could before update.
>>> I checked the rights and I can not figure out why is like this.
>>> MarcusB
>>> Meinolf Weber wrote:
>>>> Hello MarcusB,
>>>>
>>>> Do you run TrendMicro or Forefront on the server?
>>>> http://forums.technet.microsoft.com/en/winserverhyperv/thread/fc3a5
>>>> 72
>>>> 4-5dc2-44ea-83db-9b7fd8b8eade/
>>>> Best regards
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> Yes I followed the instruction. I installed KB950050, but there is
>>>>> nothing about patches.
>>>>> The old VM are working, I can not add the new ones (start)
>>>>> MarcusB
>>>>> Meinolf Weber wrote:
>>>>>> Hello MarcusB,
>>>>>>
>>>>>> Did you follow this steps also with all additional patches?
>>>>>> http://www.microsoft.com/windowsserver2008/en/us/hyperv-install.a
>>>>>> sp x
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Meinolf Weber
>>>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>>>> and
>>>>>> confers no rights.
>>>>>> ** Please do NOT email, only reply to Newsgroups
>>>>>> ** HELP us help YOU!!!
>>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>>>> We had Hyper-V RC1 with 2 Virtual machines. We updated to
>>>>>>> Hyper-V
>>>>>>> RTM yesterday. All old VM are working but I can not start a new
>>>>>>> one.
>>>>>>> After creating new Virtual Machine when we try to start it we
>>>>>>> are
>>>>>>> getting error: "An error accurred while attempting to change the
>>>>>>> state
>>>>>>> of virtual machine Filed to create memory contents"
>>>>>>> Any suggestions?
>>>>>>> MarcusB
 
Back
Top