Windows Experience Index Score

[Clayton]

I have been running my system with 4GB of memory and my Windows Experience
Index sore for the memory was 5.3, I have added another 4GB, total 8GB and
ran the index score again and still getting a sub score of 5.3 for the
memory, you think the score would be more?

 

[Carlos]

RE: Windows Experience Index Score

Clayton,
I have 4 gigs, DDR2 800, and my score is 5.9
What is your memory speed?
Maybe Vista is penalizing you if you use DDR2 533 or something like that.
Have you placed your memory sticks so that dual-channel is enabled?
If you are uncertain, download the tiny freeware CPU-Z
http://www.cpuid.com/cpuz.php
and go to the "Memory" and "SPD" tabs to get all the information you need.
Dual channel availability can be found in "Memory" tab inside the "Channels
#" box.
Carlos




"Clayton" wrote:

> I have been running my system with 4GB of memory and my Windows Experience
> Index sore for the memory was 5.3, I have added another 4GB, total 8GB and
> ran the index score again and still getting a sub score of 5.3 for the
> memory, you think the score would be more?
>
>

 

[Kerry Brown]

Re: Windows Experience Index Score

"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:e7NRNFO9IHA.4608@TK2MSFTNGP06.phx.gbl...
>I have been running my system with 4GB of memory and my Windows Experience
>Index sore for the memory was 5.3, I have added another 4GB, total 8GB and
>ran the index score again and still getting a sub score of 5.3 for the
>memory, you think the score would be more?


Once you have more than 1.5 GB of available RAM the score for the RAM is
based on the speed of the RAM not the amount of RAM. Below 1.5 GB of
available RAM the amount of RAM is taken into consideration as well as the
speed.

http://windowsvistablog.com/blogs/windowsvista/pages/458117.aspx

Scroll down to "The memory score" in the above link.

--
Kerry Brown
MS-MVP - Windows Desktop Experience: Systems Administration
http://www.vistahelp.ca/phpBB2/
http://vistahelpca.blogspot.com/

 

[Charlie Russel - MVP]

Re: Windows Experience Index Score

As Kerry says, the score won't go up based on how much you have, once you're
past the 1.5 GB mark. And that's pretty close to right for a normal user,
maybe a bit low. Realistically, you won't see a speed increase in Vista
beyond that point, unless you're the kind of user that does a LOT of things
concurrently. Then the extra RAM can make a big difference.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:e7NRNFO9IHA.4608@TK2MSFTNGP06.phx.gbl...
>I have been running my system with 4GB of memory and my Windows Experience
>Index sore for the memory was 5.3, I have added another 4GB, total 8GB and
>ran the index score again and still getting a sub score of 5.3 for the
>memory, you think the score would be more?

 

[Tony Sperling]

Re: Windows Experience Index Score

Beyond what has been said, if you keep the system as it is your score will
be going down as new and more potent hardware is added to the list - so this
is not a benchmark score. The index was originally made to tell you what you
might expect of having Vista installed on your machine, or what upgrades you
might want to consider for it. Some hardware would be more sensible to use
than something else, and at some point there would be a threshold when it
wouldn't make any sense at all.


Tony. . .



"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:e7NRNFO9IHA.4608@TK2MSFTNGP06.phx.gbl...
>I have been running my system with 4GB of memory and my Windows Experience
>Index sore for the memory was 5.3, I have added another 4GB, total 8GB and
>ran the index score again and still getting a sub score of 5.3 for the
>memory, you think the score would be more?

 

[Clayton]

Re: Windows Experience Index Score

Carlos, I have DDR2 667MHz ECC, cpuid shows as dual channel



"Carlos" <Carlos@discussions.microsoft.com> wrote in message
news:CD96CF6C-AC0E-4F7E-A2F7-E24777758413@microsoft.com...
> Clayton,
> I have 4 gigs, DDR2 800, and my score is 5.9
> What is your memory speed?
> Maybe Vista is penalizing you if you use DDR2 533 or something like that.
> Have you placed your memory sticks so that dual-channel is enabled?
> If you are uncertain, download the tiny freeware CPU-Z
> http://www.cpuid.com/cpuz.php
> and go to the "Memory" and "SPD" tabs to get all the information you need.
> Dual channel availability can be found in "Memory" tab inside the
> "Channels
> #" box.
> Carlos
>
>
>
>
> "Clayton" wrote:
>
>> I have been running my system with 4GB of memory and my Windows
>> Experience
>> Index sore for the memory was 5.3, I have added another 4GB, total 8GB
>> and
>> ran the index score again and still getting a sub score of 5.3 for the
>> memory, you think the score would be more?
>>
>>

 

[Carlos]

Re: Windows Experience Index Score

Then it should be 5.9.
I previously had DDR2 667 and the score was 5.9
Maybe you should check the actual memory timings in BIOS.
The SPD tab shows you the memory manufacturer recommendations.
The Memory tab shows you your actual timings.
Carlos

"Clayton" wrote:

> Carlos, I have DDR2 667MHz ECC, cpuid shows as dual channel
>
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:CD96CF6C-AC0E-4F7E-A2F7-E24777758413@microsoft.com...
> > Clayton,
> > I have 4 gigs, DDR2 800, and my score is 5.9
> > What is your memory speed?
> > Maybe Vista is penalizing you if you use DDR2 533 or something like that.
> > Have you placed your memory sticks so that dual-channel is enabled?
> > If you are uncertain, download the tiny freeware CPU-Z
> > http://www.cpuid.com/cpuz.php
> > and go to the "Memory" and "SPD" tabs to get all the information you need.
> > Dual channel availability can be found in "Memory" tab inside the
> > "Channels
> > #" box.
> > Carlos
> >
> >
> >
> >
> > "Clayton" wrote:
> >
> >> I have been running my system with 4GB of memory and my Windows
> >> Experience
> >> Index sore for the memory was 5.3, I have added another 4GB, total 8GB
> >> and
> >> ran the index score again and still getting a sub score of 5.3 for the
> >> memory, you think the score would be more?
> >>
> >>
>
>

 

[Clayton]

Re: Windows Experience Index Score

Memory timings in Everest shows
@333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3
(RC-RFC-RRD-WR-WTR-RTP)

My Dell Precision 390 doesn't show any SPD information in the BIOS


"Carlos" <Carlos@discussions.microsoft.com> wrote in message
news:E0AD88D9-1B64-476A-B8B5-F3180CC03753@microsoft.com...
> Then it should be 5.9.
> I previously had DDR2 667 and the score was 5.9
> Maybe you should check the actual memory timings in BIOS.
> The SPD tab shows you the memory manufacturer recommendations.
> The Memory tab shows you your actual timings.
> Carlos
>
> "Clayton" wrote:
>
>> Carlos, I have DDR2 667MHz ECC, cpuid shows as dual channel
>>
>>
>>
>> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
>> news:CD96CF6C-AC0E-4F7E-A2F7-E24777758413@microsoft.com...
>> > Clayton,
>> > I have 4 gigs, DDR2 800, and my score is 5.9
>> > What is your memory speed?
>> > Maybe Vista is penalizing you if you use DDR2 533 or something like
>> > that.
>> > Have you placed your memory sticks so that dual-channel is enabled?
>> > If you are uncertain, download the tiny freeware CPU-Z
>> > http://www.cpuid.com/cpuz.php
>> > and go to the "Memory" and "SPD" tabs to get all the information you
>> > need.
>> > Dual channel availability can be found in "Memory" tab inside the
>> > "Channels
>> > #" box.
>> > Carlos
>> >
>> >
>> >
>> >
>> > "Clayton" wrote:
>> >
>> >> I have been running my system with 4GB of memory and my Windows
>> >> Experience
>> >> Index sore for the memory was 5.3, I have added another 4GB, total 8GB
>> >> and
>> >> ran the index score again and still getting a sub score of 5.3 for the
>> >> memory, you think the score would be more?
>> >>
>> >>
>>
>>

 

[Carlos]

Re: Windows Experience Index Score

Clayton,
Sorry for the misunderstanding.
What I suggested is that you should compare CPU-Z readings in both the SPD
and Memory tabs.
Maybe the bios has assigned (Memory tab) slower timings that those suggested
by the memory manufacturer (SPD tab).
Carlos

"Clayton" wrote:

> Memory timings in Everest shows
> @333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3
> (RC-RFC-RRD-WR-WTR-RTP)
>
> My Dell Precision 390 doesn't show any SPD information in the BIOS
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:E0AD88D9-1B64-476A-B8B5-F3180CC03753@microsoft.com...
> > Then it should be 5.9.
> > I previously had DDR2 667 and the score was 5.9
> > Maybe you should check the actual memory timings in BIOS.
> > The SPD tab shows you the memory manufacturer recommendations.
> > The Memory tab shows you your actual timings.
> > Carlos
> >
> > "Clayton" wrote:
> >
> >> Carlos, I have DDR2 667MHz ECC, cpuid shows as dual channel
> >>
> >>
> >>
> >> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> >> news:CD96CF6C-AC0E-4F7E-A2F7-E24777758413@microsoft.com...
> >> > Clayton,
> >> > I have 4 gigs, DDR2 800, and my score is 5.9
> >> > What is your memory speed?
> >> > Maybe Vista is penalizing you if you use DDR2 533 or something like
> >> > that.
> >> > Have you placed your memory sticks so that dual-channel is enabled?
> >> > If you are uncertain, download the tiny freeware CPU-Z
> >> > http://www.cpuid.com/cpuz.php
> >> > and go to the "Memory" and "SPD" tabs to get all the information you
> >> > need.
> >> > Dual channel availability can be found in "Memory" tab inside the
> >> > "Channels
> >> > #" box.
> >> > Carlos
> >> >
> >> >
> >> >
> >> >
> >> > "Clayton" wrote:
> >> >
> >> >> I have been running my system with 4GB of memory and my Windows
> >> >> Experience
> >> >> Index sore for the memory was 5.3, I have added another 4GB, total 8GB
> >> >> and
> >> >> ran the index score again and still getting a sub score of 5.3 for the
> >> >> memory, you think the score would be more?
> >> >>
> >> >>
> >>
> >>
>
>