DEP

  • Thread starter Thread starter Matt Schneyer
  • Start date Start date
M

Matt Schneyer

Guest
I just installed finally Vista Ultimate 64. After several tries I did get it
installed on a Tyan 2885 board with dual singlecore opterons to a raid 5 on
a Highpoint 1820 card. I did a clean install with all other stuff removed
even had to use a floppy to get vista to see raid 5 as c drive but that has
been accomplished. After many tries. I had to remove all memory and start
with one stick Corsair 3200 memory all are matche512 sticks. I have system
running with 4 sticks 2 gigs, more it is funky, sorry about technical term.
I did find 2 that would not work as a single stick. Others worked just fine.
Now system works until I hit something that needs to change system and it
locks up. I believe problem is DEP. How do I turn it off? System was stable
with all memory in xp pro 32 and 64 with all installed, even thru triple
boot with vista betas. I am open for suggestions. Last thing I tried was to
activate before 3 day automatic thing and it locked up. Thanks This
install has me stumped.
 
Re: DEP


"Matt Schneyer" <matt@xyz.net> wrote in message
news:O0okbjv%23IHA.1148@TK2MSFTNGP02.phx.gbl...
>I just installed finally Vista Ultimate 64. After several tries I did get
>it installed on a Tyan 2885 board with dual singlecore opterons to a raid 5
>on a Highpoint 1820 card. I did a clean install with all other stuff
>removed even had to use a floppy to get vista to see raid 5 as c drive but
>that has been accomplished. After many tries. I had to remove all memory
>and start with one stick Corsair 3200 memory all are matche512 sticks. I
>have system running with 4 sticks 2 gigs, more it is funky, sorry about
>technical term. I did find 2 that would not work as a single stick. Others
>worked just fine. Now system works until I hit something that needs to
>change system and it locks up. I believe problem is DEP. How do I turn it
>off? System was stable with all memory in xp pro 32 and 64 with all
>installed, even thru triple boot with vista betas. I am open for
>suggestions. Last thing I tried was to activate before 3 day automatic
>thing and it locked up. Thanks This install has me stumped.
>
 
RE: DEP

http://www.housing.hawaii.edu/resources/support/turnoff-dep.htm
hope this link helps.

"Matt Schneyer" wrote:

> I just installed finally Vista Ultimate 64. After several tries I did get it
> installed on a Tyan 2885 board with dual singlecore opterons to a raid 5 on
> a Highpoint 1820 card. I did a clean install with all other stuff removed
> even had to use a floppy to get vista to see raid 5 as c drive but that has
> been accomplished. After many tries. I had to remove all memory and start
> with one stick Corsair 3200 memory all are matche512 sticks. I have system
> running with 4 sticks 2 gigs, more it is funky, sorry about technical term.
> I did find 2 that would not work as a single stick. Others worked just fine.
> Now system works until I hit something that needs to change system and it
> locks up. I believe problem is DEP. How do I turn it off? System was stable
> with all memory in xp pro 32 and 64 with all installed, even thru triple
> boot with vista betas. I am open for suggestions. Last thing I tried was to
> activate before 3 day automatic thing and it locked up. Thanks This
> install has me stumped.
>
>
>
 
Re: DEP

Actually it was not Dep. but video drivers. also for vista 64 it is there to
stay. your link is for xp 32. but thanks
"PH" <PH@discussions.microsoft.com> wrote in message
news:A0725493-E6FB-460A-A699-D9B693B989A8@microsoft.com...
> http://www.housing.hawaii.edu/resources/support/turnoff-dep.htm
> hope this link helps.
>
> "Matt Schneyer" wrote:
>
>> I just installed finally Vista Ultimate 64. After several tries I did get
>> it
>> installed on a Tyan 2885 board with dual singlecore opterons to a raid 5
>> on
>> a Highpoint 1820 card. I did a clean install with all other stuff
>> removed
>> even had to use a floppy to get vista to see raid 5 as c drive but that
>> has
>> been accomplished. After many tries. I had to remove all memory and start
>> with one stick Corsair 3200 memory all are matche512 sticks. I have
>> system
>> running with 4 sticks 2 gigs, more it is funky, sorry about technical
>> term.
>> I did find 2 that would not work as a single stick. Others worked just
>> fine.
>> Now system works until I hit something that needs to change system and it
>> locks up. I believe problem is DEP. How do I turn it off? System was
>> stable
>> with all memory in xp pro 32 and 64 with all installed, even thru triple
>> boot with vista betas. I am open for suggestions. Last thing I tried was
>> to
>> activate before 3 day automatic thing and it locked up. Thanks This
>> install has me stumped.
>>
>>
>>
 
Back
Top