Wireless access point periodically fails...?

  • Thread starter Thread starter Kenneth
  • Start date Start date
K

Kenneth

Guest
Howdy,

We use a Linksys wireless access point in our home...

On occasion (and apparently randomly) the systems show a
message saying "Unable to connect to wireless network."

At that point, if I try to reconnect, I see a dialog saying
"Waiting for network" but no connect is created.

When that happens, I have learned that if I power down the
wireless access point, and power it up again, all the
systems will connect in moments.

What might be causing such a failure of the wireless, and
might there be a way to correct it?

Many thanks,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

Did you change the SSID from the factory default of "Linksys" ? If you
do a View Wireless Networks how many other networks are visible ?
If you see more than 2-3 networks you may want to switch your unit
to a Radio channel other than the default of 6.


"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>
> Howdy,
>
> We use a Linksys wireless access point in our home...
>
> On occasion (and apparently randomly) the systems show a
> message saying "Unable to connect to wireless network."
>
> At that point, if I try to reconnect, I see a dialog saying
> "Waiting for network" but no connect is created.
>
> When that happens, I have learned that if I power down the
> wireless access point, and power it up again, all the
> systems will connect in moments.
>
> What might be causing such a failure of the wireless, and
> might there be a way to correct it?
>
> Many thanks,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

Check to see if there's an update to the firmware
for your WAP on the Linksys site. Apply it if there is.

If there isn't a newer version, or applying it doesn't help,
you may be in the first stages of "Linksys death" - both
of my Linksys AP's became intermittent in this way
before failing completely a couple weeks after becoming
flaky.

I use Netgear now.

"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>
> Howdy,
>
> We use a Linksys wireless access point in our home...
>
> On occasion (and apparently randomly) the systems show a
> message saying "Unable to connect to wireless network."
>
> At that point, if I try to reconnect, I see a dialog saying
> "Waiting for network" but no connect is created.
>
> When that happens, I have learned that if I power down the
> wireless access point, and power it up again, all the
> systems will connect in moments.
>
> What might be causing such a failure of the wireless, and
> might there be a way to correct it?
>
> Many thanks,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

R. McCarty wrote:
> Did you change the SSID from the factory default of "Linksys" ? If you
> do a View Wireless Networks how many other networks are visible ?
> If you see more than 2-3 networks you may want to switch your unit
> to a Radio channel other than the default of 6.
>
>
> "Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
> news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>> Howdy,
>>
>> We use a Linksys wireless access point in our home...
>>
>> On occasion (and apparently randomly) the systems show a
>> message saying "Unable to connect to wireless network."
>>
>> At that point, if I try to reconnect, I see a dialog saying
>> "Waiting for network" but no connect is created.
>>
>> When that happens, I have learned that if I power down the
>> wireless access point, and power it up again, all the
>> systems will connect in moments.
>>
>> What might be causing such a failure of the wireless, and
>> might there be a way to correct it?
>>
>> Many thanks,
>> --
>> Kenneth
>>
>> If you email... Please remove the "SPAMLESS."

>
>

There is also a utility called 'network stumbler' you can download. It
searches all wireless systems in the area and tells you what channel
they are using. In practice you should try using one that is furthest
from the others. There is some documentation with the program that
explains the spacing of channels.
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 11:40:00 -0400, "R. McCarty"
<PcEngWork-NoSpam_@mindspring.com> wrote:

>
>"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
>news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>>
>> Howdy,
>>
>> We use a Linksys wireless access point in our home...
>>
>> On occasion (and apparently randomly) the systems show a
>> message saying "Unable to connect to wireless network."
>>
>> At that point, if I try to reconnect, I see a dialog saying
>> "Waiting for network" but no connect is created.
>>
>> When that happens, I have learned that if I power down the
>> wireless access point, and power it up again, all the
>> systems will connect in moments.
>>
>> What might be causing such a failure of the wireless, and
>> might there be a way to correct it?
>>
>> Many thanks,
>> --
>> Kenneth
>>
>> If you email... Please remove the "SPAMLESS."

>


>Did you change the SSID from the factory default of "Linksys" ? If you
>do a View Wireless Networks how many other networks are visible ?
>If you see more than 2-3 networks you may want to switch your unit
>to a Radio channel other than the default of 6.
>


Howdy,

Yes, I did change the SSID...

View Wireless Networks shows only the one that is in
question.

Thanks for any further thoughts,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 13:37:19 -0400, Big_Al <BigAl@md.com>
wrote:

>R. McCarty wrote:
>> Did you change the SSID from the factory default of "Linksys" ? If you
>> do a View Wireless Networks how many other networks are visible ?
>> If you see more than 2-3 networks you may want to switch your unit
>> to a Radio channel other than the default of 6.
>>
>>
>> "Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
>> news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>>> Howdy,
>>>
>>> We use a Linksys wireless access point in our home...
>>>
>>> On occasion (and apparently randomly) the systems show a
>>> message saying "Unable to connect to wireless network."
>>>
>>> At that point, if I try to reconnect, I see a dialog saying
>>> "Waiting for network" but no connect is created.
>>>
>>> When that happens, I have learned that if I power down the
>>> wireless access point, and power it up again, all the
>>> systems will connect in moments.
>>>
>>> What might be causing such a failure of the wireless, and
>>> might there be a way to correct it?
>>>
>>> Many thanks,
>>> --
>>> Kenneth
>>>
>>> If you email... Please remove the "SPAMLESS."

>>
>>

>There is also a utility called 'network stumbler' you can download. It
>searches all wireless systems in the area and tells you what channel
>they are using. In practice you should try using one that is furthest
>from the others. There is some documentation with the program that
>explains the spacing of channels.


Howdy,

I live in a rural area and the only network that shows up is
the one with which I have the problem.

Thanks for any further thoughts,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

The only other idea that comes to mind is the Wireless control applet.
Many NICs install drivers along with a vendor specific control and
connection applet and not the built-in Wireless Zero Configuration. I
usually prefer to use the Windows supplied one as it is easier to work
with.

"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
news:k9cu949uos4cehh93h06igfrrt1aujeg2k@4ax.com...
> On Sun, 10 Aug 2008 11:40:00 -0400, "R. McCarty"
> <PcEngWork-NoSpam_@mindspring.com> wrote:
>
>>
>>"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
>>news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>>>
>>> Howdy,
>>>
>>> We use a Linksys wireless access point in our home...
>>>
>>> On occasion (and apparently randomly) the systems show a
>>> message saying "Unable to connect to wireless network."
>>>
>>> At that point, if I try to reconnect, I see a dialog saying
>>> "Waiting for network" but no connect is created.
>>>
>>> When that happens, I have learned that if I power down the
>>> wireless access point, and power it up again, all the
>>> systems will connect in moments.
>>>
>>> What might be causing such a failure of the wireless, and
>>> might there be a way to correct it?
>>>
>>> Many thanks,
>>> --
>>> Kenneth
>>>
>>> If you email... Please remove the "SPAMLESS."

>>

>
>>Did you change the SSID from the factory default of "Linksys" ? If you
>>do a View Wireless Networks how many other networks are visible ?
>>If you see more than 2-3 networks you may want to switch your unit
>>to a Radio channel other than the default of 6.
>>

>
> Howdy,
>
> Yes, I did change the SSID...
>
> View Wireless Networks shows only the one that is in
> question.
>
> Thanks for any further thoughts,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 14:29:54 -0400, "R. McCarty"
<PcEngWork-NoSpam_@mindspring.com> wrote:

>The only other idea that comes to mind is the Wireless control applet.
>Many NICs install drivers along with a vendor specific control and
>connection applet and not the built-in Wireless Zero Configuration. I
>usually prefer to use the Windows supplied one as it is easier to work
>with.


Hmmm... I do connect to the network via Windows, but have
the option of using my Intel Wireless software.

Am I correct that this is what you are suggesting?

Thanks again,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?


"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>
> Howdy,
>
> We use a Linksys wireless access point in our home...
>
> On occasion (and apparently randomly) the systems show a
> message saying "Unable to connect to wireless network."
>
> At that point, if I try to reconnect, I see a dialog saying
> "Waiting for network" but no connect is created.
>
> When that happens, I have learned that if I power down the
> wireless access point, and power it up again, all the
> systems will connect in moments.
>
> What might be causing such a failure of the wireless, and
> might there be a way to correct it?
>
> Many thanks,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."


Have you checked with Linksys support? The problem could very well be with
the WAP itself, and have nothing to do with any version of Windows or the
client card drivers.

One thing to watch for with routers is that they are susceptible to heat
damage, heat that they can generate themselves, and can start to fail like
this if they overheat. Don't house them in unventilated areas, such as
closets.

HTH
-pk
 
Re: Wireless access point periodically fails...?

Kenneth wrote:
> On Sun, 10 Aug 2008 14:29:54 -0400, "R. McCarty"
> <PcEngWork-NoSpam_@mindspring.com> wrote:
>
>> The only other idea that comes to mind is the Wireless control applet.
>> Many NICs install drivers along with a vendor specific control and
>> connection applet and not the built-in Wireless Zero Configuration. I
>> usually prefer to use the Windows supplied one as it is easier to work
>> with.

>
> Hmmm... I do connect to the network via Windows, but have
> the option of using my Intel Wireless software.
>
> Am I correct that this is what you are suggesting?
>
> Thanks again,

Either way(Windows on Intel software) should work. One suggestion is to
try placing your router closer to the computer or at least higher. I get
much better signals with my wireless router sitting on top of the
entertainment center rather than on the floor next to it.

Bill
 
Re: Wireless access point periodically fails...?

Kenneth wrote:
> On Sun, 10 Aug 2008 14:29:54 -0400, "R. McCarty"
> <PcEngWork-NoSpam_@mindspring.com> wrote:
>
>> The only other idea that comes to mind is the Wireless control applet.
>> Many NICs install drivers along with a vendor specific control and
>> connection applet and not the built-in Wireless Zero Configuration. I
>> usually prefer to use the Windows supplied one as it is easier to work
>> with.

>
> Hmmm... I do connect to the network via Windows, but have
> the option of using my Intel Wireless software.
>
> Am I correct that this is what you are suggesting?
>
> Thanks again,


Yes, that is what R. McCarty was talking about. You can use *either*
Windows WZC *or* the Intel software, but if both are running
simultaneously, you will likely have problems. Usually the non-Windows
application has an option to disable itself in favor of using Windows,
but not always. For general info on this topic, see
http://www.ezlan.net/wzc.html

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 15:23:02 -0700, Bill Sharpe
<wfsnopam@adelphia.net> wrote:

>Kenneth wrote:
>> On Sun, 10 Aug 2008 14:29:54 -0400, "R. McCarty"
>> <PcEngWork-NoSpam_@mindspring.com> wrote:
>>
>>> The only other idea that comes to mind is the Wireless control applet.
>>> Many NICs install drivers along with a vendor specific control and
>>> connection applet and not the built-in Wireless Zero Configuration. I
>>> usually prefer to use the Windows supplied one as it is easier to work
>>> with.

>>
>> Hmmm... I do connect to the network via Windows, but have
>> the option of using my Intel Wireless software.
>>
>> Am I correct that this is what you are suggesting?
>>
>> Thanks again,

>Either way(Windows on Intel software) should work. One suggestion is to
>try placing your router closer to the computer or at least higher. I get
>much better snals with my wireless router sitting on top of the
>entertainment center rather than on the floor next to it.
>
>Bill


Hi Bill,

The wireless happens not to be a router, but that probably
does not matter.

The problem I am having is not strength of signal. It is
strong, but somehow, periodically, the system(s) get
dropped. The signal still shows as "excellent."

Powering down then powering up the wireless access point
then causes the systems to connect immediately, again,
showing an excellent signal.

Thanks for any further thoughts,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 18:55:27 -0400, Lem <lemp40@unknownhost>
wrote:

>Kenneth wrote:
>> On Sun, 10 Aug 2008 14:29:54 -0400, "R. McCarty"
>> <PcEngWork-NoSpam_@mindspring.com> wrote:
>>
>>> The only other idea that comes to mind is the Wireless control applet.
>>> Many NICs install drivers along with a vendor specific control and
>>> connection applet and not the built-in Wireless Zero Configuration. I
>>> usually prefer to use the Windows supplied one as it is easier to work
>>> with.

>>
>> Hmmm... I do connect to the network via Windows, but have
>> the option of using my Intel Wireless software.
>>
>> Am I correct that this is what you are suggesting?
>>
>> Thanks again,

>
>Yes, that is what R. McCarty was talking about. You can use *either*
>Windows WZC *or* the Intel software, but if both are running
>simultaneously, you will likely have problems. Usually the non-Windows
>application has an option to disable itself in favor of using Windows,
>but not always. For general info on this topic, see
>http://www.ezlan.net/wzc.html


Howdy,

I have the Intel software available, but not running...

Thanks,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 17:50:05 -0400, "Patrick Keenan"
<test@dev.null> wrote:

>
>"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
>news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
>>
>> Howdy,
>>
>> We use a Linksys wireless access point in our home...
>>
>> On occasion (and apparently randomly) the systems show a
>> message saying "Unable to connect to wireless network."
>>
>> At that point, if I try to reconnect, I see a dialog saying
>> "Waiting for network" but no connect is created.
>>
>> When that happens, I have learned that if I power down the
>> wireless access point, and power it up again, all the
>> systems will connect in moments.
>>
>> What might be causing such a failure of the wireless, and
>> might there be a way to correct it?
>>
>> Many thanks,
>> --
>> Kenneth
>>
>> If you email... Please remove the "SPAMLESS."

>
>Have you checked with Linksys support? The problem could very well be with
>the WAP itself, and have nothing to do with any version of Windows or the
>client card drivers.
>
>One thing to watch for with routers is that they are susceptible to heat
>damage, heat that they can generate themselves, and can start to fail like
>this if they overheat. Don't house them in unventilated areas, such as
>closets.
>
>HTH
>-pk


Howdy,

Your comments are particularly interesting because we do,
indeed, have the unit in a rather warm cabinet.

I will look into alternate locations, and thank you for your
suggestion,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

Kenneth wrote:
> Howdy,
>
> We use a Linksys wireless access point in our home...
>
> On occasion (and apparently randomly) the systems show a
> message saying "Unable to connect to wireless network."
>
> At that point, if I try to reconnect, I see a dialog saying
> "Waiting for network" but no connect is created.
>
> When that happens, I have learned that if I power down the
> wireless access point, and power it up again, all the
> systems will connect in moments.
>
> What might be causing such a failure of the wireless, and
> might there be a way to correct it?
>
> Many thanks,


Hi Kenneth,

This is a common problem with all home a wireless
equipment. I get these complaints ALL THE TIME.
(A commercial AP would run you in the $500 to 1500
range. These won't freeze up on you.)

Just hold your nose and power cycle the thing.

Or, switch to wired.

-T
 
Re: Wireless access point periodically fails...?

On Sun, 10 Aug 2008 17:37:23 -0700, ToddAndMargo
<ToddAndMargo@invalid.com> wrote:

>Kenneth wrote:
>> Howdy,
>>
>> We use a Linksys wireless access point in our home...
>>
>> On occasion (and apparently randomly) the systems show a
>> message saying "Unable to connect to wireless network."
>>
>> At that point, if I try to reconnect, I see a dialog saying
>> "Waiting for network" but no connect is created.
>>
>> When that happens, I have learned that if I power down the
>> wireless access point, and power it up again, all the
>> systems will connect in moments.
>>
>> What might be causing such a failure of the wireless, and
>> might there be a way to correct it?
>>
>> Many thanks,

>
>Hi Kenneth,
>
>This is a common problem with all home a wireless
>equipment. I get these complaints ALL THE TIME.
>(A commercial AP would run you in the $500 to 1500
>range. These won't freeze up on you.)
>
>Just hold your nose and power cycle the thing.
>
>Or, switch to wired.
>
>-T


Hi Todd,

Thanks for your comments...

But it does raise some questions:

I've been using this WAP for about two years and it did not
drop a system until perhaps a month ago. Since then, it has
happened on the order of eight times.

If it is just the "nature of the beast" why would you guess
the problem has just arisen?

Also, might you say something more about what is actually
causing the problem? That is, with a strong signal, what is
causing the systems to be dropped?

Thanks again,
--
Kenneth

If you email... Please remove the "SPAMLESS."
 
Re: Wireless access point periodically fails...?

Kenneth wrote:
> On Sun, 10 Aug 2008 17:37:23 -0700, ToddAndMargo
> <ToddAndMargo@invalid.com> wrote:
>
>> Kenneth wrote:
>>> Howdy,
>>>
>>> We use a Linksys wireless access point in our home...
>>>
>>> On occasion (and apparently randomly) the systems show a
>>> message saying "Unable to connect to wireless network."
>>>
>>> At that point, if I try to reconnect, I see a dialog saying
>>> "Waiting for network" but no connect is created.
>>>
>>> When that happens, I have learned that if I power down the
>>> wireless access point, and power it up again, all the
>>> systems will connect in moments.
>>>
>>> What might be causing such a failure of the wireless, and
>>> might there be a way to correct it?
>>>
>>> Many thanks,

>> Hi Kenneth,
>>
>> This is a common problem with all home a wireless
>> equipment. I get these complaints ALL THE TIME.
>> (A commercial AP would run you in the $500 to 1500
>> range. These won't freeze up on you.)
>>
>> Just hold your nose and power cycle the thing.
>>
>> Or, switch to wired.
>>
>> -T

>
> Hi Todd,
>
> Thanks for your comments...
>
> But it does raise some questions:
>
> I've been using this WAP for about two years and it did not
> drop a system until perhaps a month ago. Since then, it has
> happened on the order of eight times.
>
> If it is just the "nature of the beast" why would you guess
> the problem has just arisen?
>
> Also, might you say something more about what is actually
> causing the problem? That is, with a strong signal, what is
> causing the systems to be dropped?
>
> Thanks again,


Hi Kenneth,

Home wireless equipment is real junk. It has a very
short lifespan. Your unit may just be failing from
old age. Two years is old for home equipment.
This is one of those "you get what you pay for".

I see this a lot, even with new equipment.
I do not believe there is anything you can do to
fix the problem, other than just replacing the thing.
And, even at that, things may not get any better.

Of the home equipment I see, D-Link seem to be
a bit better. But only a little bit. You still
have to do a lot of power cycling.

I'd just hold my nose until it pooped out completely.
If wireless is critical to your business, consider
a commercial level unit.

Or, just wire it. Ethernet is a gazillion
times more reliable than wireless.

-T
 
Re: Wireless access point periodically fails...?

Kenneth wrote:
> On Sun, 10 Aug 2008 17:37:23 -0700, ToddAndMargo
> <ToddAndMargo@invalid.com> wrote:
>
>> Kenneth wrote:
>>> Howdy,
>>>
>>> We use a Linksys wireless access point in our home...
>>>
>>> On occasion (and apparently randomly) the systems show a
>>> message saying "Unable to connect to wireless network."
>>>
>>> At that point, if I try to reconnect, I see a dialog saying
>>> "Waiting for network" but no connect is created.
>>>
>>> When that happens, I have learned that if I power down the
>>> wireless access point, and power it up again, all the
>>> systems will connect in moments.
>>>
>>> What might be causing such a failure of the wireless, and
>>> might there be a way to correct it?
>>>
>>> Many thanks,

>> Hi Kenneth,
>>
>> This is a common problem with all home a wireless
>> equipment. I get these complaints ALL THE TIME.
>> (A commercial AP would run you in the $500 to 1500
>> range. These won't freeze up on you.)
>>
>> Just hold your nose and power cycle the thing.
>>
>> Or, switch to wired.
>>
>> -T

>
> Hi Todd,
>
> Thanks for your comments...
>
> But it does raise some questions:
>
> I've been using this WAP for about two years and it did not
> drop a system until perhaps a month ago. Since then, it has
> happened on the order of eight times.
>
> If it is just the "nature of the beast" why would you guess
> the problem has just arisen?
>
> Also, might you say something more about what is actually
> causing the problem? That is, with a strong signal, what is
> causing the systems to be dropped?
>
> Thanks again,


Hi Kenneth,

Home wireless equipment is real junk. It has a very
short lifespan. Your unit may just be failing from
old age. Two years is old for home equipment.
This is one of those "you get what you pay for".

I see this a lot, even with new equipment.
I do not believe there is anything you can do to
fix the problem, other than just replacing the thing.
And, even at that, things may not get any better.

Of the home equipment I see, D-Link seem to be
a bit better. But only a little bit. You still
have to do a lot of power cycling.

I'd just hold my nose until it pooped out completely.
If wireless is critical to your business, consider
a commercial level unit.

Or, just wire it. Ethernet is a gazillion
times more reliable than wireless.

-T
 
Re: Wireless access point periodically fails...?

I am writing this letter to ALL Wireless Router manufacturers.
I have a Linksys Wireless Router Model:BEFW11S4. It is 7 years (yes, count
them, all of seven little years) old. I have visited the Linksys website
numerous times trying to set up the WEP/WPA security on that wireless router
(as all responsible wireless router owners should!). I found that there are
no links to any wireless router setting websites that are congruent with the
screen shots from Linksys' own self help technical support site. I have had
to call Linksys several times to resolve this issue only to be placed on hold
for lengthy times (sometimes my call was dropped and I had to start over ....
how sad for such a large company to have such poorly trained phone
receptionists!), then be transferred (see previous comment about the phone
receptionists) to a supposed supervisor, only to finally be transferred to
someone who tells me that the warranty has expired and wants me to pay $40.00
for the technical support to do the right thing that I want and need to do.
First, the device works fine (as evidenced by this e-mail that you have
just received)!
Second, why should I have to pay for doing the right thing?
Third, if I am going to be EXTORTED into buying a new wireless router so
that I can do the right thing and set up an encryption key for a secure
network, what on Gods' Green Earth makes anyone think that I would CHOOSE to
buy another Linksys product when ALL that I have ever received from them is a
functional wireless router (yes, even after seven whole years) and the
crappiest Customer Service/Technical Support I have ever had the displeasure
to encounter!
I shall copy this letter and try to find as many Chat Rooms as possible in
order to spread the word of ALL that I have gone through with the Chain of
Command at the Linksys phone center, well above and beyond what any
reasonable person should expect to go through, and still have NO RELIEF
concerning my singular issue with their product and its capabilities that I
SHOULD be able to enjoy as the owner of said product! What has happend to
"The Customer Is Always Right" Customer Service mantra (I can't say "In
America" because the call was handled in India)? Is the Customer, the ones
that makes the company what it is through the purchase of products, so
worthless to the company that they can just be treated with abject contempt
and scorn? Is the Customer to thus be trampled underfoot? Are we paying to
be so abused? I, for one (yes, one, the beginning of all), shall NOT be
treated in such manner, and CERTAINLY shall NOT PAY to be treated as such!
In this world of expanding technologies, it shall be those with the
GREATEST Customer Appeal that shall continue to be found worthwile in the
publics' eyes (and pocketbooks) and shall grow to meet the demands of a
growing world - ESPECIALLY in the Electronics Department!
It is now my strongest desire that the Linksys Corporation suffers
irreparable damage and goes out of business for their Crappy Customer
Service! I can only hope that I reach enough people around the world to bring
this desire true!

"Patrick Keenan" wrote:

>
> "Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
> news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
> >
> > Howdy,
> >
> > We use a Linksys wireless access point in our home...
> >
> > On occasion (and apparently randomly) the systems show a
> > message saying "Unable to connect to wireless network."
> >
> > At that point, if I try to reconnect, I see a dialog saying
> > "Waiting for network" but no connect is created.
> >
> > When that happens, I have learned that if I power down the
> > wireless access point, and power it up again, all the
> > systems will connect in moments.
> >
> > What might be causing such a failure of the wireless, and
> > might there be a way to correct it?
> >
> > Many thanks,
> > --
> > Kenneth
> >
> > If you email... Please remove the "SPAMLESS."

>
> Have you checked with Linksys support? The problem could very well be with
> the WAP itself, and have nothing to do with any version of Windows or the
> client card drivers.
>
> One thing to watch for with routers is that they are susceptible to heat
> damage, heat that they can generate themselves, and can start to fail like
> this if they overheat. Don't house them in unventilated areas, such as
> closets.
>
> HTH
> -pk
>
>
 
Re: Wireless access point periodically fails...?

I am writing this letter to ALL Wireless Router manufacturers.
I have a Linksys Wireless Router Model:BEFW11S4. It is 7 years (yes, count
them, all of seven little years) old. I have visited the Linksys website
numerous times trying to set up the WEP/WPA security on that wireless router
(as all responsible wireless router owners should!). I found that there are
no links to any wireless router setting websites that are congruent with the
screen shots from Linksys' own self help technical support site. I have had
to call Linksys several times to resolve this issue only to be placed on hold
for lengthy times (sometimes my call was dropped and I had to start over ....
how sad for such a large company to have such poorly trained phone
receptionists!), then be transferred (see previous comment about the phone
receptionists) to a supposed supervisor, only to finally be transferred to
someone who tells me that the warranty has expired and wants me to pay $40.00
for the technical support to do the right thing that I want and need to do.
First, the device works fine (as evidenced by this e-mail that you have
just received)!
Second, why should I have to pay for doing the right thing?
Third, if I am going to be EXTORTED into buying a new wireless router so
that I can do the right thing and set up an encryption key for a secure
network, what on Gods' Green Earth makes anyone think that I would CHOOSE to
buy another Linksys product when ALL that I have ever received from them is a
functional wireless router (yes, even after seven whole years) and the
crappiest Customer Service/Technical Support I have ever had the displeasure
to encounter!
I shall copy this letter and try to find as many Chat Rooms as possible in
order to spread the word of ALL that I have gone through with the Chain of
Command at the Linksys phone center, well above and beyond what any
reasonable person should expect to go through, and still have NO RELIEF
concerning my singular issue with their product and its capabilities that I
SHOULD be able to enjoy as the owner of said product! What has happend to
"The Customer Is Always Right" Customer Service mantra (I can't say "In
America" because the call was handled in India)? Is the Customer, the ones
that makes the company what it is through the purchase of products, so
worthless to the company that they can just be treated with abject contempt
and scorn? Is the Customer to thus be trampled underfoot? Are we paying to
be so abused? I, for one (yes, one, the beginning of all), shall NOT be
treated in such manner, and CERTAINLY shall NOT PAY to be treated as such!
In this world of expanding technologies, it shall be those with the
GREATEST Customer Appeal that shall continue to be found worthwile in the
publics' eyes (and pocketbooks) and shall grow to meet the demands of a
growing world - ESPECIALLY in the Electronics Department!
It is now my strongest desire that the Linksys Corporation suffers
irreparable damage and goes out of business for their Crappy Customer
Service! I can only hope that I reach enough people around the world to bring
this desire true!

"Kenneth" wrote:

> On Sun, 10 Aug 2008 17:50:05 -0400, "Patrick Keenan"
> <test@dev.null> wrote:
>
> >
> >"Kenneth" <usenet@soleSPAMLESSassociates.com> wrote in message
> >news:9t1u94pltbn1of9e98fs3femgg7fa1k846@4ax.com...
> >>
> >> Howdy,
> >>
> >> We use a Linksys wireless access point in our home...
> >>
> >> On occasion (and apparently randomly) the systems show a
> >> message saying "Unable to connect to wireless network."
> >>
> >> At that point, if I try to reconnect, I see a dialog saying
> >> "Waiting for network" but no connect is created.
> >>
> >> When that happens, I have learned that if I power down the
> >> wireless access point, and power it up again, all the
> >> systems will connect in moments.
> >>
> >> What might be causing such a failure of the wireless, and
> >> might there be a way to correct it?
> >>
> >> Many thanks,
> >> --
> >> Kenneth
> >>
> >> If you email... Please remove the "SPAMLESS."

> >
> >Have you checked with Linksys support? The problem could very well be with
> >the WAP itself, and have nothing to do with any version of Windows or the
> >client card drivers.
> >
> >One thing to watch for with routers is that they are susceptible to heat
> >damage, heat that they can generate themselves, and can start to fail like
> >this if they overheat. Don't house them in unventilated areas, such as
> >closets.
> >
> >HTH
> >-pk

>
> Howdy,
>
> Your comments are particularly interesting because we do,
> indeed, have the unit in a rather warm cabinet.
>
> I will look into alternate locations, and thank you for your
> suggestion,
> --
> Kenneth
>
> If you email... Please remove the "SPAMLESS."
>
 
Back
Top