KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

  • Thread starter Thread starter matthew steward
  • Start date Start date
M

matthew steward

Guest
ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
Comodo 3 FW (v.378)
AVAST HOME EDITION v. 4.8.1229
SpySweeper v. 5.8 (build 55)
ST, SAS, A2antimalware on demand scanners
SpywareBlaster 4.1
IE 8 b2
I'd like a fix for this issue as I tried even removing my Comodo3 FW and
with resident protection AV OFF and downloading the setup from microsoft web
sites but it just won't install and constantly asks to install itself.
Contacted the microsoft support without success.



---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080914-0, 2008-09-14
Analyse le : 2008-09-14 16:07:39
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

Uninstall IE8 Beta 2 then try again.

matthew steward wrote:
> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
> Comodo 3 FW (v.378)
> AVAST HOME EDITION v. 4.8.1229
> SpySweeper v. 5.8 (build 55)
> ST, SAS, A2antimalware on demand scanners
> SpywareBlaster 4.1
> IE 8 b2
> I'd like a fix for this issue as I tried even removing my Comodo3 FW and
> with resident protection AV OFF and downloading the setup from microsoft
> web
> sites but it just won't install and constantly asks to install itself.
> Contacted the microsoft support without success.
>
>
>
> ---
> Antivirus avast! : message Sortant sain.
> Base de donnees virale (VPS) : 080914-0, 2008-09-14
> Analyse le : 2008-09-14 16:07:39
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

You just can't uninstall IE8 b2 update. Impossible to go back to IE7!!! Not
to my knowledge. They warned me before installing it 4-5 weeks ago!


"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:ui34cxqFJHA.1456@TK2MSFTNGP03.phx.gbl...
> Uninstall IE8 Beta 2 then try again.
>
> matthew steward wrote:
>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>> Comodo 3 FW (v.378)
>> AVAST HOME EDITION v. 4.8.1229
>> SpySweeper v. 5.8 (build 55)
>> ST, SAS, A2antimalware on demand scanners
>> SpywareBlaster 4.1
>> IE 8 b2
>> I'd like a fix for this issue as I tried even removing my Comodo3 FW and
>> with resident protection AV OFF and downloading the setup from microsoft
>> web
>> sites but it just won't install and constantly asks to install itself.
>> Contacted the microsoft support without success.
>>
>>
>>
>> ---
>> Antivirus avast! : message Sortant sain.
>> Base de donnees virale (VPS) : 080914-0, 2008-09-14
>> Analyse le : 2008-09-14 16:07:39
>> avast! - copyright (c) 1988-2008 ALWIL Software.
>> http://www.avast.com

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080914-0, 2008-09-14
> Analyse le : 2008-09-14 19:40:59
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080914-0, 2008-09-14
Analyse le : 2008-09-14 19:43:01
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

1. If you installed IE8 Beta 1, then installed Vista SP1, and then installed
IE8 Beta 2, you're right: You won't be able to uninstall IE8 Beta 2 or IE8
Beta 1 without first uninstalling Vista SP1.

2. If, however, you installed Vista SP1 without having installed IE8 Beta 1,
you will be able to uninstall IE8 Beta 2.

If #1 is the case, the only good news is that you'll be able to install IE8
Final Release.

Back to your problem, please answer the following by number, not inline...

1. Does disabling (or even uninstalling) Comodo Firewall AND THEN enabling
the Windows Firewall allow KB955302 to install?

2. Are you getting an error similar to "configuring updates stage 3 of 3. 0%
complete"? (cf. http://support.microsoft.com/kb/949358)

3. Did you install Vista SP1 via Windows Update or manually?

>>> Comodo 3 FW (v.378)
>>> AVAST HOME EDITION v. 4.8.1229
>>> SpySweeper v. 5.8 (build 55)
>>> ST, SAS, A2antimalware on demand scanners
>>> SpywareBlaster 4.1


4. Were all of the above fully disabled (including "real-time protection"
components/services of all anti-spyware applications) and was the Windows
Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?

>>> Contacted the microsoft support without success.


5. Explain.

Unlimited installation and compatibility support for Vista SP1 is available
at no charge through 18 Mar-09. Go to
http://support.microsoft.com/oas/default.aspx | select Windows Vista |
select Windows Vista Service Pack 1
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/


matthew steward wrote:
> You just can't uninstall IE8 b2 update. Impossible to go back to IE7!!!
> Not
> to my knowledge. They warned me before installing it 4-5 weeks ago!
>
> "PA Bear [MS MVP]" wrote:
>> Uninstall IE8 Beta 2 then try again.
>>
>> matthew steward wrote:
>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>> Comodo 3 FW (v.378)
>>> AVAST HOME EDITION v. 4.8.1229
>>> SpySweeper v. 5.8 (build 55)
>>> ST, SAS, A2antimalware on demand scanners
>>> SpywareBlaster 4.1
>>> IE 8 b2
>>> I'd like a fix for this issue as I tried even removing my Comodo3 FW and
>>> with resident protection AV OFF and downloading the setup from microsoft
>>> web
>>> sites but it just won't install and constantly asks to install itself.
>>> Contacted the microsoft support without success.
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

2. If, however, you installed Vista SP1 without having installed IE8 Beta 1,
you will be able to uninstall IE8 Beta 2.
Well, I have an error message telling me the uninstallation aborted
1. Does disabling (or even uninstalling) Comodo Firewall AND THEN enabling
> the Windows Firewall allow KB955302 to install?


No
2. Are you getting an error similar to "configuring updates stage 3 of 3. 0%
> complete"? (cf. http://support.microsoft.com/kb/949358)

No
3. Did you install Vista SP1 via Windows Update or manually?
Via Automatic Updates (Windows Update, had no problem with it)

>>>> Comodo 3 FW (v.378)
>>>> AVAST HOME EDITION v. 4.8.1229
>>>> SpySweeper v. 5.8 (build 55)
>>>> ST, SAS, A2antimalware on demand scanners
>>>> SpywareBlaster 4.1

>
> 4. Were all of the above fully disabled (including "real-time protection"
> components/services of all anti-spyware applications) and was the Windows
> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?

I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have AVAST and
SpySweeper on RP and they were all turned off. Now ST and A-2antimalware are
loading services the same when windows start but I did not check in Process
manager. I can only say their RP is turned OFF as I run them as on-demand
scanners. Spywareblaster wasn't disabled but I don,t think it's the problem.

I'd say it's IE9 b2 and would like to know how to get back to IE7. I tried
uninstalling this update in Safe Mode with the same bad result.

>>>> Contacted the microsoft support without success.

>
> 5. Explain.
>
> Unlimited installation and compatibility support for Vista SP1 is
> available at no charge through 18 Mar-09. Go to
> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
> select Windows Vista Service Pack 1

Yes, Support there is slow and non-efficient. I emailed the guy and wait for
an answer but I am hoping faster solutions in this newsgroup




"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:e%23FGTcsFJHA.5572@TK2MSFTNGP03.phx.gbl...
> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
> installed IE8 Beta 2, you're right: You won't be able to uninstall IE8
> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>
> 2. If, however, you installed Vista SP1 without having installed IE8 Beta
> 1, you will be able to uninstall IE8 Beta 2.
>
> If #1 is the case, the only good news is that you'll be able to install
> IE8 Final Release.
>
> Back to your problem, please answer the following by number, not inline...
>
> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN enabling
> the Windows Firewall allow KB955302 to install?
>
> 2. Are you getting an error similar to "configuring updates stage 3 of 3.
> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>
> 3. Did you install Vista SP1 via Windows Update or manually?
>
>>>> Comodo 3 FW (v.378)
>>>> AVAST HOME EDITION v. 4.8.1229
>>>> SpySweeper v. 5.8 (build 55)
>>>> ST, SAS, A2antimalware on demand scanners
>>>> SpywareBlaster 4.1

>
> 4. Were all of the above fully disabled (including "real-time protection"
> components/services of all anti-spyware applications) and was the Windows
> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?
>
>>>> Contacted the microsoft support without success.

>
> 5. Explain.
>
> Unlimited installation and compatibility support for Vista SP1 is
> available at no charge through 18 Mar-09. Go to
> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
> select Windows Vista Service Pack 1
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
>
> matthew steward wrote:
>> You just can't uninstall IE8 b2 update. Impossible to go back to IE7!!!
>> Not
>> to my knowledge. They warned me before installing it 4-5 weeks ago!
>>
>> "PA Bear [MS MVP]" wrote:
>>> Uninstall IE8 Beta 2 then try again.
>>>
>>> matthew steward wrote:
>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>> Comodo 3 FW (v.378)
>>>> AVAST HOME EDITION v. 4.8.1229
>>>> SpySweeper v. 5.8 (build 55)
>>>> ST, SAS, A2antimalware on demand scanners
>>>> SpywareBlaster 4.1
>>>> IE 8 b2
>>>> I'd like a fix for this issue as I tried even removing my Comodo3 FW
>>>> and
>>>> with resident protection AV OFF and downloading the setup from
>>>> microsoft
>>>> web
>>>> sites but it just won't install and constantly asks to install itself.
>>>> Contacted the microsoft support without success.

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080914-0, 2008-09-14
> Analyse le : 2008-09-14 20:54:13
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080914-0, 2008-09-14
Analyse le : 2008-09-14 21:07:30
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

[Such inline, cut/paste replies are not helpful.]

If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed Vista
SP1, you'll have to uninstall Vista SP1 before you'll be able to uninstall
IE8 Beta 2.

matthew steward wrote:
> 2. If, however, you installed Vista SP1 without having installed IE8 Beta
> 1,
> you will be able to uninstall IE8 Beta 2.
> Well, I have an error message telling me the uninstallation aborted
> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN enabling
>> the Windows Firewall allow KB955302 to install?

>
> No
> 2. Are you getting an error similar to "configuring updates stage 3 of 3.
> 0%
>> complete"? (cf. http://support.microsoft.com/kb/949358)

> No
> 3. Did you install Vista SP1 via Windows Update or manually?
> Via Automatic Updates (Windows Update, had no problem with it)
>
>>>>> Comodo 3 FW (v.378)
>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>> SpySweeper v. 5.8 (build 55)
>>>>> ST, SAS, A2antimalware on demand scanners
>>>>> SpywareBlaster 4.1

>>
>> 4. Were all of the above fully disabled (including "real-time protection"
>> components/services of all anti-spyware applications) and was the Windows
>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?

> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have AVAST
> and
> SpySweeper on RP and they were all turned off. Now ST and A-2antimalware
> are
> loading services the same when windows start but I did not check in
> Process
> manager. I can only say their RP is turned OFF as I run them as on-demand
> scanners. Spywareblaster wasn't disabled but I don,t think it's the
> problem.
>
> I'd say it's IE9 b2 and would like to know how to get back to IE7. I tried
> uninstalling this update in Safe Mode with the same bad result.
>
>>>>> Contacted the microsoft support without success.

>>
>> 5. Explain.
>>
>> Unlimited installation and compatibility support for Vista SP1 is
>> available at no charge through 18 Mar-09. Go to
>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>> select Windows Vista Service Pack 1

> Yes, Support there is slow and non-efficient. I emailed the guy and wait
> for
> an answer but I am hoping faster solutions in this newsgroup
>
>
>
>
> "PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
> news:e%23FGTcsFJHA.5572@TK2MSFTNGP03.phx.gbl...
>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>> installed IE8 Beta 2, you're right: You won't be able to uninstall IE8
>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>
>> 2. If, however, you installed Vista SP1 without having installed IE8 Beta
>> 1, you will be able to uninstall IE8 Beta 2.
>>
>> If #1 is the case, the only good news is that you'll be able to install
>> IE8 Final Release.
>>
>> Back to your problem, please answer the following by number, not
>> inline...
>>
>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>> enabling
>> the Windows Firewall allow KB955302 to install?
>>
>> 2. Are you getting an error similar to "configuring updates stage 3 of 3.
>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>
>> 3. Did you install Vista SP1 via Windows Update or manually?
>>
>>>>> Comodo 3 FW (v.378)
>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>> SpySweeper v. 5.8 (build 55)
>>>>> ST, SAS, A2antimalware on demand scanners
>>>>> SpywareBlaster 4.1

>>
>> 4. Were all of the above fully disabled (including "real-time protection"
>> components/services of all anti-spyware applications) and was the Windows
>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?
>>
>>>>> Contacted the microsoft support without success.

>>
>> 5. Explain.
>>
>> Unlimited installation and compatibility support for Vista SP1 is
>> available at no charge through 18 Mar-09. Go to
>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>> select Windows Vista Service Pack 1
>> --
>> ~Robear Dyer (PA Bear)
>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> AumHa VSOP & Admin http://aumha.net
>> DTS-L http://dts-l.net/
>>
>>
>> matthew steward wrote:
>>> You just can't uninstall IE8 b2 update. Impossible to go back to IE7!!!
>>> Not
>>> to my knowledge. They warned me before installing it 4-5 weeks ago!
>>>
>>> "PA Bear [MS MVP]" wrote:
>>>> Uninstall IE8 Beta 2 then try again.
>>>>
>>>> matthew steward wrote:
>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>> Comodo 3 FW (v.378)
>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>> SpySweeper v. 5.8 (build 55)
>>>>> ST, SAS, A2antimalware on demand scanners
>>>>> SpywareBlaster 4.1
>>>>> IE 8 b2
>>>>> I'd like a fix for this issue as I tried even removing my Comodo3 FW
>>>>> and
>>>>> with resident protection AV OFF and downloading the setup from
>>>>> microsoft
>>>>> web
>>>>> sites but it just won't install and constantly asks to install itself.
>>>>> Contacted the microsoft support without success.

>>
>>
>>
>> ---
>> Antivirus avast! : message Entrant sain.
>> Base de donnees virale (VPS) : 080914-0, 2008-09-14
>> Analyse le : 2008-09-14 20:54:13
>> avast! - copyright (c) 1988-2008 ALWIL Software.
>> http://www.avast.com
>>
>>
>>

>
>
>
> ---
> Antivirus avast! : message Sortant sain.
> Base de donnees virale (VPS) : 080914-0, 2008-09-14
> Analyse le : 2008-09-14 21:07:30
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

PA Bear,
I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
update but it doesn't work. The uninstall can't complete.


"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:eSi3Bm1FJHA.3848@TK2MSFTNGP02.phx.gbl...
> [Such inline, cut/paste replies are not helpful.]
>
> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed
> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able to
> uninstall IE8 Beta 2.
>
> matthew steward wrote:
>> 2. If, however, you installed Vista SP1 without having installed IE8 Beta
>> 1,
>> you will be able to uninstall IE8 Beta 2.
>> Well, I have an error message telling me the uninstallation aborted
>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>> enabling
>>> the Windows Firewall allow KB955302 to install?

>>
>> No
>> 2. Are you getting an error similar to "configuring updates stage 3 of 3.
>> 0%
>>> complete"? (cf. http://support.microsoft.com/kb/949358)

>> No
>> 3. Did you install Vista SP1 via Windows Update or manually?
>> Via Automatic Updates (Windows Update, had no problem with it)
>>
>>>>>> Comodo 3 FW (v.378)
>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>> SpywareBlaster 4.1
>>>
>>> 4. Were all of the above fully disabled (including "real-time
>>> protection"
>>> components/services of all anti-spyware applications) and was the
>>> Windows
>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?

>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have AVAST
>> and
>> SpySweeper on RP and they were all turned off. Now ST and A-2antimalware
>> are
>> loading services the same when windows start but I did not check in
>> Process
>> manager. I can only say their RP is turned OFF as I run them as on-demand
>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>> problem.
>>
>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>> tried
>> uninstalling this update in Safe Mode with the same bad result.
>>
>>>>>> Contacted the microsoft support without success.
>>>
>>> 5. Explain.
>>>
>>> Unlimited installation and compatibility support for Vista SP1 is
>>> available at no charge through 18 Mar-09. Go to
>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>> select Windows Vista Service Pack 1

>> Yes, Support there is slow and non-efficient. I emailed the guy and wait
>> for
>> an answer but I am hoping faster solutions in this newsgroup
>>
>>
>>
>>
>> "PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
>> news:e%23FGTcsFJHA.5572@TK2MSFTNGP03.phx.gbl...
>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>> installed IE8 Beta 2, you're right: You won't be able to uninstall IE8
>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>
>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>> Beta
>>> 1, you will be able to uninstall IE8 Beta 2.
>>>
>>> If #1 is the case, the only good news is that you'll be able to install
>>> IE8 Final Release.
>>>
>>> Back to your problem, please answer the following by number, not
>>> inline...
>>>
>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>> enabling
>>> the Windows Firewall allow KB955302 to install?
>>>
>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>> 3.
>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>
>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>
>>>>>> Comodo 3 FW (v.378)
>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>> SpywareBlaster 4.1
>>>
>>> 4. Were all of the above fully disabled (including "real-time
>>> protection"
>>> components/services of all anti-spyware applications) and was the
>>> Windows
>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta build?
>>>
>>>>>> Contacted the microsoft support without success.
>>>
>>> 5. Explain.
>>>
>>> Unlimited installation and compatibility support for Vista SP1 is
>>> available at no charge through 18 Mar-09. Go to
>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>> select Windows Vista Service Pack 1
>>> --
>>> ~Robear Dyer (PA Bear)
>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>>> AumHa VSOP & Admin http://aumha.net
>>> DTS-L http://dts-l.net/
>>>
>>>
>>> matthew steward wrote:
>>>> You just can't uninstall IE8 b2 update. Impossible to go back to IE7!!!
>>>> Not
>>>> to my knowledge. They warned me before installing it 4-5 weeks ago!
>>>>
>>>> "PA Bear [MS MVP]" wrote:
>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>
>>>>> matthew steward wrote:
>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>> Comodo 3 FW (v.378)
>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>> SpywareBlaster 4.1
>>>>>> IE 8 b2
>>>>>> I'd like a fix for this issue as I tried even removing my Comodo3 FW
>>>>>> and
>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>> microsoft
>>>>>> web
>>>>>> sites but it just won't install and constantly asks to install
>>>>>> itself.
>>>>>> Contacted the microsoft support without success.
>>>
>>>
>>>
>>> ---
>>> Antivirus avast! : message Entrant sain.
>>> Base de donnees virale (VPS) : 080914-0, 2008-09-14
>>> Analyse le : 2008-09-14 20:54:13
>>> avast! - copyright (c) 1988-2008 ALWIL Software.
>>> http://www.avast.com
>>>
>>>
>>>

>>
>>
>>
>> ---
>> Antivirus avast! : message Sortant sain.
>> Base de donnees virale (VPS) : 080914-0, 2008-09-14
>> Analyse le : 2008-09-14 21:07:30
>> avast! - copyright (c) 1988-2008 ALWIL Software.
>> http://www.avast.com

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080915-0, 2008-09-15
> Analyse le : 2008-09-15 17:18:41
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080915-0, 2008-09-15
Analyse le : 2008-09-15 17:21:29
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

Assuming that means you installed IE8 Beta 2 AFTER you'd installed Vista
SP1:

=> Post the verbatim error message you get when trying to uninstall IE8 Beta
2.

=> See both parts of the section "How to uninstall Internet Explorer 8 Beta
2" here: http://support.microsoft.com/kb/949787

=> Do you use a "Registry cleaner"? Have you used one since you installed
IE8 Beta 2? If so, you're out of luck.

=> Post about this issue in the IE Beta newsgroup:
news://msnews.microsoft.com/microsoft.public.internetexplorer.beta

NB: The only IE8 Beta support for non-US/CA residents is in that newsgroup.
You may end up having to reinstall Vista; such are the risks of installing
beta software.

The only possibly good news in all of this is that you should be able to
install the final release of IE8.
--
~PA Bear


matthew steward wrote:
> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
> update but it doesn't work. The uninstall can't complete.
> "PA Bear [MS MVP]" wrote:
>> [Such inline, cut/paste replies are not helpful.]
>>
>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed
>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able to
>> uninstall IE8 Beta 2.
>>
>> matthew steward wrote:
>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>> Beta
>>> 1,
>>> you will be able to uninstall IE8 Beta 2.
>>> Well, I have an error message telling me the uninstallation aborted
>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>> enabling
>>>> the Windows Firewall allow KB955302 to install?
>>>
>>> No
>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>> 3.
>>> 0%
>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>> No
>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>
>>>>>>> Comodo 3 FW (v.378)
>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>> SpywareBlaster 4.1
>>>>
>>>> 4. Were all of the above fully disabled (including "real-time
>>>> protection"
>>>> components/services of all anti-spyware applications) and was the
>>>> Windows
>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>> build?
>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have AVAST
>>> and
>>> SpySweeper on RP and they were all turned off. Now ST and A-2antimalware
>>> are
>>> loading services the same when windows start but I did not check in
>>> Process
>>> manager. I can only say their RP is turned OFF as I run them as
>>> on-demand
>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>> problem.
>>>
>>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>>> tried
>>> uninstalling this update in Safe Mode with the same bad result.
>>>
>>>>>>> Contacted the microsoft support without success.
>>>>
>>>> 5. Explain.
>>>>
>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>> available at no charge through 18 Mar-09. Go to
>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>>> select Windows Vista Service Pack 1
>>> Yes, Support there is slow and non-efficient. I emailed the guy and wait
>>> for
>>> an answer but I am hoping faster solutions in this newsgroup
>>>
>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall IE8
>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>
>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>> Beta
>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>
>>>> If #1 is the case, the only good news is that you'll be able to install
>>>> IE8 Final Release.
>>>>
>>>> Back to your problem, please answer the following by number, not
>>>> inline...
>>>>
>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>> enabling
>>>> the Windows Firewall allow KB955302 to install?
>>>>
>>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>>> 3.
>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>
>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>
>>>>>>> Comodo 3 FW (v.378)
>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>> SpywareBlaster 4.1
>>>>
>>>> 4. Were all of the above fully disabled (including "real-time
>>>> protection"
>>>> components/services of all anti-spyware applications) and was the
>>>> Windows
>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>> build?
>>>>
>>>>>>> Contacted the microsoft support without success.
>>>>
>>>> 5. Explain.
>>>>
>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>> available at no charge through 18 Mar-09. Go to
>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>>> select Windows Vista Service Pack 1
>>>>
>>>> matthew steward wrote:
>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>> IE7!!!
>>>>> Not to my knowledge. They warned me before installing it 4-5 weeks
>>>>> ago!
>>>>>
>>>>> "PA Bear [MS MVP]" wrote:
>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>
>>>>>> matthew steward wrote:
>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>> Comodo 3 FW (v.378)
>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>> SpywareBlaster 4.1
>>>>>>> IE 8 b2
>>>>>>> I'd like a fix for this issue as I tried even removing my Comodo3 FW
>>>>>>> and
>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>> microsoft
>>>>>>> web
>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>> itself.
>>>>>>> Contacted the microsoft support without success.
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED CORRECTLY"
whenever I try to uninstall IE 8 b2
I installed IE8 b2 after installing Vista SP1 (from Vista Home Premium) but
from IE 7;
I use a lot of registry cleaners:
I used Comodo beta registry cleaner
I'm using MV Reg Clean 5.5
I use CCleaner
I use Advanced Windows Personal Care
I use Glary
I use Auslogic Registry Defragmentor;
I'm going to post. I'm a CA resident
"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:eJ6Xgz3FJHA.4864@TK2MSFTNGP02.phx.gbl...
> Assuming that means you installed IE8 Beta 2 AFTER you'd installed Vista
> SP1:
>
> => Post the verbatim error message you get when trying to uninstall IE8
> Beta 2.
>
> => See both parts of the section "How to uninstall Internet Explorer 8
> Beta 2" here: http://support.microsoft.com/kb/949787
>
> => Do you use a "Registry cleaner"? Have you used one since you installed
> IE8 Beta 2? If so, you're out of luck.
>
> => Post about this issue in the IE Beta newsgroup:
> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>
> NB: The only IE8 Beta support for non-US/CA residents is in that
> newsgroup. You may end up having to reinstall Vista; such are the risks of
> installing beta software.
>
> The only possibly good news in all of this is that you should be able to
> install the final release of IE8.
> --
> ~PA Bear
>
>
> matthew steward wrote:
>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
>> update but it doesn't work. The uninstall can't complete.
>> "PA Bear [MS MVP]" wrote:
>>> [Such inline, cut/paste replies are not helpful.]
>>>
>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed
>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able to
>>> uninstall IE8 Beta 2.
>>>
>>> matthew steward wrote:
>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>> Beta
>>>> 1,
>>>> you will be able to uninstall IE8 Beta 2.
>>>> Well, I have an error message telling me the uninstallation aborted
>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>> enabling
>>>>> the Windows Firewall allow KB955302 to install?
>>>>
>>>> No
>>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>>> 3.
>>>> 0%
>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>> No
>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>
>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>> SpywareBlaster 4.1
>>>>>
>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>> protection"
>>>>> components/services of all anti-spyware applications) and was the
>>>>> Windows
>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>> build?
>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have AVAST
>>>> and
>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>> A-2antimalware
>>>> are
>>>> loading services the same when windows start but I did not check in
>>>> Process
>>>> manager. I can only say their RP is turned OFF as I run them as
>>>> on-demand
>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>>> problem.
>>>>
>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>>>> tried
>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>
>>>>>>>> Contacted the microsoft support without success.
>>>>>
>>>>> 5. Explain.
>>>>>
>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>> available at no charge through 18 Mar-09. Go to
>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>>>> select Windows Vista Service Pack 1
>>>> Yes, Support there is slow and non-efficient. I emailed the guy and
>>>> wait
>>>> for
>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>
>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall IE8
>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>
>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>> Beta
>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>
>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>> install
>>>>> IE8 Final Release.
>>>>>
>>>>> Back to your problem, please answer the following by number, not
>>>>> inline...
>>>>>
>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>> enabling
>>>>> the Windows Firewall allow KB955302 to install?
>>>>>
>>>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>>>> 3.
>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>
>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>
>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>> SpywareBlaster 4.1
>>>>>
>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>> protection"
>>>>> components/services of all anti-spyware applications) and was the
>>>>> Windows
>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>> build?
>>>>>
>>>>>>>> Contacted the microsoft support without success.
>>>>>
>>>>> 5. Explain.
>>>>>
>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>> available at no charge through 18 Mar-09. Go to
>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista |
>>>>> select Windows Vista Service Pack 1
>>>>>
>>>>> matthew steward wrote:
>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>> IE7!!!
>>>>>> Not to my knowledge. They warned me before installing it 4-5 weeks
>>>>>> ago!
>>>>>>
>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>
>>>>>>> matthew steward wrote:
>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>> SpywareBlaster 4.1
>>>>>>>> IE 8 b2
>>>>>>>> I'd like a fix for this issue as I tried even removing my Comodo3
>>>>>>>> FW
>>>>>>>> and
>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>> microsoft
>>>>>>>> web
>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>> itself.
>>>>>>>> Contacted the microsoft support without success.

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080915-0, 2008-09-15
> Analyse le : 2008-09-15 18:29:24
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080915-0, 2008-09-15
Analyse le : 2008-09-15 18:54:47
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

[X-post to IE Beta newsgroup]

> I use a lot of registry cleaners:
> I used Comodo beta registry cleaner
> I'm using MV Reg Clean 5.5
> I use CCleaner
> I use Advanced Windows Personal Care [OneCare?]
> I use Glary
> I use Auslogic Registry Defragmentor;


Think your Registry needs "cleaning" or "repairing"? Read
http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

Any one of the above deleted the IE8 Beta 2 uninstall files. Without this
data, you cannot uninstall IE8 Beta 2. The only way to remove IE8 Beta 2
now is to format & reinstall Vista and all Vista updates including Vista SP1
(if the machine didn't come with Vista SP1 preinstalled).

On the other hand, you should be able to install IE8 final release.

NB: The free IE8 Beta Support for US and CA residents
(http://support.microsoft.com/oas/default.aspx?prid=12357) is going to tell
you the same thing so don't bother calling.

==================================

Off Topic: I'd advise you to disable email scanning by your anti-virus
application to avoid Windows Mail problems. It provides no additional
protection and even Symantec says it's not necessary:

<QP>
Disabling Email Scanning does not leave you unprotected against viruses that
are distributed as email attachments. Norton AntiVirus Auto-Protect scans
incoming files as they are saved to your hard drive, including email and
email attachments. Email Scanning is just another layer on top of this. To
make sure that Auto-Protect is providing the maximum protection, keep
Auto-Protect enabled and run LiveUpdate regularly to ensure that you have
the most recent virus definitions.
</QP>
http://service1.symantec.com/SUPPORT/nav.nsf/docid/2002111812533106
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/


matthew steward wrote:
> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED CORRECTLY"
> whenever I try to uninstall IE 8 b2
> I installed IE8 b2 after installing Vista SP1 (from Vista Home Premium)
> but
> from IE 7;
> I use a lot of registry cleaners:
> I used Comodo beta registry cleaner
> I'm using MV Reg Clean 5.5
> I use CCleaner
> I use Advanced Windows Personal Care
> I use Glary
> I use Auslogic Registry Defragmentor;
> I'm going to post. I'm a CA resident
>
> "PA Bear [MS MVP]" wrote:
>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed Vista
>> SP1:
>>
>> => Post the verbatim error message you get when trying to uninstall IE8
>> Beta 2.
>>
>> => See both parts of the section "How to uninstall Internet Explorer 8
>> Beta 2" here: http://support.microsoft.com/kb/949787
>>
>> => Do you use a "Registry cleaner"? Have you used one since you
>> installed
>> IE8 Beta 2? If so, you're out of luck.
>>
>> => Post about this issue in the IE Beta newsgroup:
>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>
>> NB: The only IE8 Beta support for non-US/CA residents is in that
>> newsgroup. You may end up having to reinstall Vista; such are the risks
>> of
>> installing beta software.
>>
>> The only possibly good news in all of this is that you should be able to
>> install the final release of IE8.
>>
>> matthew steward wrote:
>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
>>> update but it doesn't work. The uninstall can't complete.
>>>
>>> "PA Bear [MS MVP]" wrote:
>>>> [Such inline, cut/paste replies are not helpful.]
>>>>
>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed
>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able to
>>>> uninstall IE8 Beta 2.
>>>>
>>>> matthew steward wrote:
>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>> Beta
>>>>> 1,
>>>>> you will be able to uninstall IE8 Beta 2.
>>>>> Well, I have an error message telling me the uninstallation aborted
>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>> enabling
>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>
>>>>> No
>>>>> 2. Are you getting an error similar to "configuring updates stage 3 of
>>>>> 3.
>>>>> 0%
>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>> No
>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>
>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>> SpywareBlaster 4.1
>>>>>>
>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>> protection"
>>>>>> components/services of all anti-spyware applications) and was the
>>>>>> Windows
>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>> build?
>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>> AVAST
>>>>> and
>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>> A-2antimalware
>>>>> are
>>>>> loading services the same when windows start but I did not check in
>>>>> Process
>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>> on-demand
>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>>>> problem.
>>>>>
>>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>>>>> tried
>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>
>>>>>>>>> Contacted the microsoft support without success.
>>>>>>
>>>>>> 5. Explain.
>>>>>>
>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista
>>>>>> |
>>>>>> select Windows Vista Service Pack 1
>>>>> Yes, Support there is slow and non-efficient. I emailed the guy and
>>>>> wait
>>>>> for
>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>
>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall
>>>>>> IE8
>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>
>>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>>> Beta
>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>
>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>> install
>>>>>> IE8 Final Release.
>>>>>>
>>>>>> Back to your problem, please answer the following by number, not
>>>>>> inline...
>>>>>>
>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>> enabling
>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>
>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>> of
>>>>>> 3.
>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>
>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>
>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>> SpywareBlaster 4.1
>>>>>>
>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>> protection"
>>>>>> components/services of all anti-spyware applications) and was the
>>>>>> Windows
>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>> build?
>>>>>>
>>>>>>>>> Contacted the microsoft support without success.
>>>>>>
>>>>>> 5. Explain.
>>>>>>
>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista
>>>>>> |
>>>>>> select Windows Vista Service Pack 1
>>>>>>
>>>>>> matthew steward wrote:
>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>>> IE7!!!
>>>>>>> Not to my knowledge. They warned me before installing it 4-5 weeks
>>>>>>> ago!
>>>>>>>
>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>
>>>>>>>> matthew steward wrote:
>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>> IE 8 b2
>>>>>>>>> I'd like a fix for this issue as I tried even removing my Comodo3
>>>>>>>>> FW
>>>>>>>>> and
>>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>>> microsoft
>>>>>>>>> web
>>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>>> itself.
>>>>>>>>> Contacted the microsoft support without success.
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

Actually, I've got a personnal message from a friend that installed the
patch on 2 PCs with IE8b2 on and PCTOOLS FW instead of COMODO3 FW. Since
COMODO already did this to me in the past, I'm going to remove it all
cleanly and that is my last chance. I'll keep IE8 b2 because I like it
better than IE7 and it's stable. I'll let you know.
"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:e87h20AGJHA.612@TK2MSFTNGP06.phx.gbl...
> [X-post to IE Beta newsgroup]
>
>> I use a lot of registry cleaners:
>> I used Comodo beta registry cleaner
>> I'm using MV Reg Clean 5.5
>> I use CCleaner
>> I use Advanced Windows Personal Care [OneCare?]
>> I use Glary
>> I use Auslogic Registry Defragmentor;

>
> Think your Registry needs "cleaning" or "repairing"? Read
> http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
>
> Any one of the above deleted the IE8 Beta 2 uninstall files. Without this
> data, you cannot uninstall IE8 Beta 2. The only way to remove IE8 Beta 2
> now is to format & reinstall Vista and all Vista updates including Vista
> SP1 (if the machine didn't come with Vista SP1 preinstalled).
>
> On the other hand, you should be able to install IE8 final release.
>
> NB: The free IE8 Beta Support for US and CA residents
> (http://support.microsoft.com/oas/default.aspx?prid=12357) is going to
> tell you the same thing so don't bother calling.
>
> ==================================
>
> Off Topic: I'd advise you to disable email scanning by your anti-virus
> application to avoid Windows Mail problems. It provides no additional
> protection and even Symantec says it's not necessary:
>
> <QP>
> Disabling Email Scanning does not leave you unprotected against viruses
> that are distributed as email attachments. Norton AntiVirus Auto-Protect
> scans incoming files as they are saved to your hard drive, including email
> and email attachments. Email Scanning is just another layer on top of
> this. To make sure that Auto-Protect is providing the maximum protection,
> keep Auto-Protect enabled and run LiveUpdate regularly to ensure that you
> have the most recent virus definitions.
> </QP>
> http://service1.symantec.com/SUPPORT/nav.nsf/docid/2002111812533106
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
>
> matthew steward wrote:
>> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED
>> CORRECTLY"
>> whenever I try to uninstall IE 8 b2
>> I installed IE8 b2 after installing Vista SP1 (from Vista Home Premium)
>> but
>> from IE 7;
>> I use a lot of registry cleaners:
>> I used Comodo beta registry cleaner
>> I'm using MV Reg Clean 5.5
>> I use CCleaner
>> I use Advanced Windows Personal Care
>> I use Glary
>> I use Auslogic Registry Defragmentor;
>> I'm going to post. I'm a CA resident
>>
>> "PA Bear [MS MVP]" wrote:
>>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed Vista
>>> SP1:
>>>
>>> => Post the verbatim error message you get when trying to uninstall IE8
>>> Beta 2.
>>>
>>> => See both parts of the section "How to uninstall Internet Explorer 8
>>> Beta 2" here: http://support.microsoft.com/kb/949787
>>>
>>> => Do you use a "Registry cleaner"? Have you used one since you
>>> installed
>>> IE8 Beta 2? If so, you're out of luck.
>>>
>>> => Post about this issue in the IE Beta newsgroup:
>>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>>
>>> NB: The only IE8 Beta support for non-US/CA residents is in that
>>> newsgroup. You may end up having to reinstall Vista; such are the risks
>>> of
>>> installing beta software.
>>>
>>> The only possibly good news in all of this is that you should be able to
>>> install the final release of IE8.
>>>
>>> matthew steward wrote:
>>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
>>>> update but it doesn't work. The uninstall can't complete.
>>>>
>>>> "PA Bear [MS MVP]" wrote:
>>>>> [Such inline, cut/paste replies are not helpful.]
>>>>>
>>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you installed
>>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able to
>>>>> uninstall IE8 Beta 2.
>>>>>
>>>>> matthew steward wrote:
>>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>>> Beta
>>>>>> 1,
>>>>>> you will be able to uninstall IE8 Beta 2.
>>>>>> Well, I have an error message telling me the uninstallation aborted
>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>> enabling
>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>
>>>>>> No
>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>> of
>>>>>> 3.
>>>>>> 0%
>>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>> No
>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>>
>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>
>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>> protection"
>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>> Windows
>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>> build?
>>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>>> AVAST
>>>>>> and
>>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>>> A-2antimalware
>>>>>> are
>>>>>> loading services the same when windows start but I did not check in
>>>>>> Process
>>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>>> on-demand
>>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>>>>> problem.
>>>>>>
>>>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>>>>>> tried
>>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>>
>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>
>>>>>>> 5. Explain.
>>>>>>>
>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista
>>>>>>> |
>>>>>>> select Windows Vista Service Pack 1
>>>>>> Yes, Support there is slow and non-efficient. I emailed the guy and
>>>>>> wait
>>>>>> for
>>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>>
>>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall
>>>>>>> IE8
>>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>>
>>>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>>>> Beta
>>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>>
>>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>>> install
>>>>>>> IE8 Final Release.
>>>>>>>
>>>>>>> Back to your problem, please answer the following by number, not
>>>>>>> inline...
>>>>>>>
>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>> enabling
>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>
>>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>>> of
>>>>>>> 3.
>>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>
>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>
>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>
>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>> protection"
>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>> Windows
>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>> build?
>>>>>>>
>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>
>>>>>>> 5. Explain.
>>>>>>>
>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows Vista
>>>>>>> |
>>>>>>> select Windows Vista Service Pack 1
>>>>>>>
>>>>>>> matthew steward wrote:
>>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>>>> IE7!!!
>>>>>>>> Not to my knowledge. They warned me before installing it 4-5 weeks
>>>>>>>> ago!
>>>>>>>>
>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>>
>>>>>>>>> matthew steward wrote:
>>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>> IE 8 b2
>>>>>>>>>> I'd like a fix for this issue as I tried even removing my Comodo3
>>>>>>>>>> FW
>>>>>>>>>> and
>>>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>>>> microsoft
>>>>>>>>>> web
>>>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>>>> itself.
>>>>>>>>>> Contacted the microsoft support without success.

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080916-0, 2008-09-16
> Analyse le : 2008-09-16 21:03:44
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080916-0, 2008-09-16
Analyse le : 2008-09-16 21:09:02
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

I'm sorry for me but even this didn't work out. Installation stops at 94%
completion before failing. Tried deactivating all my security app.
SpywareBlaster too but with same results.


"matthew steward" <matt@hotmail.com> a écrit dans le message de
news:uOVz5HGGJHA.4228@TK2MSFTNGP05.phx.gbl...
> Actually, I've got a personnal message from a friend that installed the
> patch on 2 PCs with IE8b2 on and PCTOOLS FW instead of COMODO3 FW. Since
> COMODO already did this to me in the past, I'm going to remove it all
> cleanly and that is my last chance. I'll keep IE8 b2 because I like it
> better than IE7 and it's stable. I'll let you know.
> "PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
> news:e87h20AGJHA.612@TK2MSFTNGP06.phx.gbl...
>> [X-post to IE Beta newsgroup]
>>
>>> I use a lot of registry cleaners:
>>> I used Comodo beta registry cleaner
>>> I'm using MV Reg Clean 5.5
>>> I use CCleaner
>>> I use Advanced Windows Personal Care [OneCare?]
>>> I use Glary
>>> I use Auslogic Registry Defragmentor;

>>
>> Think your Registry needs "cleaning" or "repairing"? Read
>> http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
>>
>> Any one of the above deleted the IE8 Beta 2 uninstall files. Without
>> this data, you cannot uninstall IE8 Beta 2. The only way to remove IE8
>> Beta 2 now is to format & reinstall Vista and all Vista updates including
>> Vista SP1 (if the machine didn't come with Vista SP1 preinstalled).
>>
>> On the other hand, you should be able to install IE8 final release.
>>
>> NB: The free IE8 Beta Support for US and CA residents
>> (http://support.microsoft.com/oas/default.aspx?prid=12357) is going to
>> tell you the same thing so don't bother calling.
>>
>> ==================================
>>
>> Off Topic: I'd advise you to disable email scanning by your anti-virus
>> application to avoid Windows Mail problems. It provides no additional
>> protection and even Symantec says it's not necessary:
>>
>> <QP>
>> Disabling Email Scanning does not leave you unprotected against viruses
>> that are distributed as email attachments. Norton AntiVirus Auto-Protect
>> scans incoming files as they are saved to your hard drive, including
>> email and email attachments. Email Scanning is just another layer on top
>> of this. To make sure that Auto-Protect is providing the maximum
>> protection, keep Auto-Protect enabled and run LiveUpdate regularly to
>> ensure that you have the most recent virus definitions.
>> </QP>
>> http://service1.symantec.com/SUPPORT/nav.nsf/docid/2002111812533106
>> --
>> ~Robear Dyer (PA Bear)
>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> AumHa VSOP & Admin http://aumha.net
>> DTS-L http://dts-l.net/
>>
>>
>> matthew steward wrote:
>>> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED
>>> CORRECTLY"
>>> whenever I try to uninstall IE 8 b2
>>> I installed IE8 b2 after installing Vista SP1 (from Vista Home Premium)
>>> but
>>> from IE 7;
>>> I use a lot of registry cleaners:
>>> I used Comodo beta registry cleaner
>>> I'm using MV Reg Clean 5.5
>>> I use CCleaner
>>> I use Advanced Windows Personal Care
>>> I use Glary
>>> I use Auslogic Registry Defragmentor;
>>> I'm going to post. I'm a CA resident
>>>
>>> "PA Bear [MS MVP]" wrote:
>>>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed
>>>> Vista
>>>> SP1:
>>>>
>>>> => Post the verbatim error message you get when trying to uninstall IE8
>>>> Beta 2.
>>>>
>>>> => See both parts of the section "How to uninstall Internet Explorer 8
>>>> Beta 2" here: http://support.microsoft.com/kb/949787
>>>>
>>>> => Do you use a "Registry cleaner"? Have you used one since you
>>>> installed
>>>> IE8 Beta 2? If so, you're out of luck.
>>>>
>>>> => Post about this issue in the IE Beta newsgroup:
>>>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>>>
>>>> NB: The only IE8 Beta support for non-US/CA residents is in that
>>>> newsgroup. You may end up having to reinstall Vista; such are the risks
>>>> of
>>>> installing beta software.
>>>>
>>>> The only possibly good news in all of this is that you should be able
>>>> to
>>>> install the final release of IE8.
>>>>
>>>> matthew steward wrote:
>>>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
>>>>> update but it doesn't work. The uninstall can't complete.
>>>>>
>>>>> "PA Bear [MS MVP]" wrote:
>>>>>> [Such inline, cut/paste replies are not helpful.]
>>>>>>
>>>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you
>>>>>> installed
>>>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able
>>>>>> to
>>>>>> uninstall IE8 Beta 2.
>>>>>>
>>>>>> matthew steward wrote:
>>>>>>> 2. If, however, you installed Vista SP1 without having installed IE8
>>>>>>> Beta
>>>>>>> 1,
>>>>>>> you will be able to uninstall IE8 Beta 2.
>>>>>>> Well, I have an error message telling me the uninstallation aborted
>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>> enabling
>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>
>>>>>>> No
>>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>>> of
>>>>>>> 3.
>>>>>>> 0%
>>>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>> No
>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>>>
>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>
>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>> protection"
>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>> Windows
>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>> build?
>>>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>>>> AVAST
>>>>>>> and
>>>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>>>> A-2antimalware
>>>>>>> are
>>>>>>> loading services the same when windows start but I did not check in
>>>>>>> Process
>>>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>>>> on-demand
>>>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>>>>>> problem.
>>>>>>>
>>>>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7. I
>>>>>>> tried
>>>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>>>
>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>
>>>>>>>> 5. Explain.
>>>>>>>>
>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>> Vista |
>>>>>>>> select Windows Vista Service Pack 1
>>>>>>> Yes, Support there is slow and non-efficient. I emailed the guy and
>>>>>>> wait
>>>>>>> for
>>>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>>>
>>>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>>>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall
>>>>>>>> IE8
>>>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>>>
>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>> IE8
>>>>>>>> Beta
>>>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>>>
>>>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>>>> install
>>>>>>>> IE8 Final Release.
>>>>>>>>
>>>>>>>> Back to your problem, please answer the following by number, not
>>>>>>>> inline...
>>>>>>>>
>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>> enabling
>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>
>>>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>>>> of
>>>>>>>> 3.
>>>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>
>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>
>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>
>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>> protection"
>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>> Windows
>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>> build?
>>>>>>>>
>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>
>>>>>>>> 5. Explain.
>>>>>>>>
>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>> Vista |
>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>
>>>>>>>> matthew steward wrote:
>>>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>>>>> IE7!!!
>>>>>>>>> Not to my knowledge. They warned me before installing it 4-5 weeks
>>>>>>>>> ago!
>>>>>>>>>
>>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>>>
>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>> IE 8 b2
>>>>>>>>>>> I'd like a fix for this issue as I tried even removing my
>>>>>>>>>>> Comodo3
>>>>>>>>>>> FW
>>>>>>>>>>> and
>>>>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>>>>> microsoft
>>>>>>>>>>> web
>>>>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>>>>> itself.
>>>>>>>>>>> Contacted the microsoft support without success.

>>
>>
>>
>> ---
>> Antivirus avast! : message Entrant sain.
>> Base de donnees virale (VPS) : 080916-0, 2008-09-16
>> Analyse le : 2008-09-16 21:03:44
>> avast! - copyright (c) 1988-2008 ALWIL Software.
>> http://www.avast.com
>>
>>
>>

>
>
>
> ---
> Antivirus avast! : message Sortant sain.
> Base de donnees virale (VPS) : 080916-0, 2008-09-16
> Analyse le : 2008-09-16 21:09:02
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080916-0, 2008-09-16
> Analyse le : 2008-09-17 02:17:40
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080916-0, 2008-09-16
Analyse le : 2008-09-17 02:19:56
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

And if you uninstall Comodo FW and then merely enable the Windows Firewall?

Has a Norton or McAfee application ever been installed on the machine?

>>>> I used Comodo beta registry cleaner
>>>> I'm using MV Reg Clean 5.5
>>>> I use CCleaner
>>>> I use Advanced Windows Personal Care
>>>> I use Glary


Which of the above are still installed and loading at boot?

matthew steward wrote:
> I'm sorry for me but even this didn't work out. Installation stops at 94%
> completion before failing. Tried deactivating all my security app.
> SpywareBlaster too but with same results.
>
>
> "matthew steward" <matt@hotmail.com> a écrit dans le message de
> news:uOVz5HGGJHA.4228@TK2MSFTNGP05.phx.gbl...
>> Actually, I've got a personnal message from a friend that installed the
>> patch on 2 PCs with IE8b2 on and PCTOOLS FW instead of COMODO3 FW. Since
>> COMODO already did this to me in the past, I'm going to remove it all
>> cleanly and that is my last chance. I'll keep IE8 b2 because I like it
>> better than IE7 and it's stable. I'll let you know.
>> "PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
>> news:e87h20AGJHA.612@TK2MSFTNGP06.phx.gbl...
>>> [X-post to IE Beta newsgroup]
>>>
>>>> I use a lot of registry cleaners:
>>>> I used Comodo beta registry cleaner
>>>> I'm using MV Reg Clean 5.5
>>>> I use CCleaner
>>>> I use Advanced Windows Personal Care [OneCare?]
>>>> I use Glary
>>>> I use Auslogic Registry Defragmentor;
>>>
>>> Think your Registry needs "cleaning" or "repairing"? Read
>>> http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
>>>
>>> Any one of the above deleted the IE8 Beta 2 uninstall files. Without
>>> this data, you cannot uninstall IE8 Beta 2. The only way to remove IE8
>>> Beta 2 now is to format & reinstall Vista and all Vista updates
>>> including
>>> Vista SP1 (if the machine didn't come with Vista SP1 preinstalled).
>>>
>>> On the other hand, you should be able to install IE8 final release.
>>>
>>> NB: The free IE8 Beta Support for US and CA residents
>>> (http://support.microsoft.com/oas/default.aspx?prid=12357) is going to
>>> tell you the same thing so don't bother calling.
>>>
>>> ==================================
>>>
>>> Off Topic: I'd advise you to disable email scanning by your anti-virus
>>> application to avoid Windows Mail problems. It provides no additional
>>> protection and even Symantec says it's not necessary:
>>>
>>> <QP>
>>> Disabling Email Scanning does not leave you unprotected against viruses
>>> that are distributed as email attachments. Norton AntiVirus Auto-Protect
>>> scans incoming files as they are saved to your hard drive, including
>>> email and email attachments. Email Scanning is just another layer on top
>>> of this. To make sure that Auto-Protect is providing the maximum
>>> protection, keep Auto-Protect enabled and run LiveUpdate regularly to
>>> ensure that you have the most recent virus definitions.
>>> </QP>
>>> http://service1.symantec.com/SUPPORT/nav.nsf/docid/2002111812533106
>>> --
>>> ~Robear Dyer (PA Bear)
>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>>> AumHa VSOP & Admin http://aumha.net
>>> DTS-L http://dts-l.net/
>>>
>>>
>>> matthew steward wrote:
>>>> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED
>>>> CORRECTLY"
>>>> whenever I try to uninstall IE 8 b2
>>>> I installed IE8 b2 after installing Vista SP1 (from Vista Home Premium)
>>>> but
>>>> from IE 7;
>>>> I use a lot of registry cleaners:
>>>> I used Comodo beta registry cleaner
>>>> I'm using MV Reg Clean 5.5
>>>> I use CCleaner
>>>> I use Advanced Windows Personal Care
>>>> I use Glary
>>>> I use Auslogic Registry Defragmentor;
>>>> I'm going to post. I'm a CA resident
>>>>
>>>> "PA Bear [MS MVP]" wrote:
>>>>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed
>>>>> Vista
>>>>> SP1:
>>>>>
>>>>> => Post the verbatim error message you get when trying to uninstall
>>>>> IE8
>>>>> Beta 2.
>>>>>
>>>>> => See both parts of the section "How to uninstall Internet Explorer 8
>>>>> Beta 2" here: http://support.microsoft.com/kb/949787
>>>>>
>>>>> => Do you use a "Registry cleaner"? Have you used one since you
>>>>> installed
>>>>> IE8 Beta 2? If so, you're out of luck.
>>>>>
>>>>> => Post about this issue in the IE Beta newsgroup:
>>>>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>>>>
>>>>> NB: The only IE8 Beta support for non-US/CA residents is in that
>>>>> newsgroup. You may end up having to reinstall Vista; such are the
>>>>> risks
>>>>> of
>>>>> installing beta software.
>>>>>
>>>>> The only possibly good news in all of this is that you should be able
>>>>> to
>>>>> install the final release of IE8.
>>>>>
>>>>> matthew steward wrote:
>>>>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall the
>>>>>> update but it doesn't work. The uninstall can't complete.
>>>>>>
>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>> [Such inline, cut/paste replies are not helpful.]
>>>>>>>
>>>>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you
>>>>>>> installed
>>>>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able
>>>>>>> to
>>>>>>> uninstall IE8 Beta 2.
>>>>>>>
>>>>>>> matthew steward wrote:
>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>> IE8
>>>>>>>> Beta
>>>>>>>> 1,
>>>>>>>> you will be able to uninstall IE8 Beta 2.
>>>>>>>> Well, I have an error message telling me the uninstallation aborted
>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>> enabling
>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>
>>>>>>>> No
>>>>>>>> 2. Are you getting an error similar to "configuring updates stage 3
>>>>>>>> of
>>>>>>>> 3.
>>>>>>>> 0%
>>>>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>> No
>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>>>>
>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>
>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>> protection"
>>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>>> Windows
>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>>> build?
>>>>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>>>>> AVAST
>>>>>>>> and
>>>>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>>>>> A-2antimalware
>>>>>>>> are
>>>>>>>> loading services the same when windows start but I did not check in
>>>>>>>> Process
>>>>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>>>>> on-demand
>>>>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's the
>>>>>>>> problem.
>>>>>>>>
>>>>>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7.
>>>>>>>> I
>>>>>>>> tried
>>>>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>>>>
>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>
>>>>>>>>> 5. Explain.
>>>>>>>>>
>>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>> Vista |
>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>> Yes, Support there is slow and non-efficient. I emailed the guy and
>>>>>>>> wait
>>>>>>>> for
>>>>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>>>>
>>>>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and then
>>>>>>>>> installed IE8 Beta 2, you're right: You won't be able to uninstall
>>>>>>>>> IE8
>>>>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>>>>
>>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>>> IE8
>>>>>>>>> Beta
>>>>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>>>>
>>>>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>>>>> install
>>>>>>>>> IE8 Final Release.
>>>>>>>>>
>>>>>>>>> Back to your problem, please answer the following by number, not
>>>>>>>>> inline...
>>>>>>>>>
>>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>>> enabling
>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>>
>>>>>>>>> 2. Are you getting an error similar to "configuring updates stage
>>>>>>>>> 3
>>>>>>>>> of
>>>>>>>>> 3.
>>>>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>>
>>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>>
>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>
>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>> protection"
>>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>>> Windows
>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>>> build?
>>>>>>>>>
>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>
>>>>>>>>> 5. Explain.
>>>>>>>>>
>>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>> Vista |
>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>>
>>>>>>>>> matthew steward wrote:
>>>>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>>>>>> IE7!!!
>>>>>>>>>> Not to my knowledge. They warned me before installing it 4-5
>>>>>>>>>> weeks
>>>>>>>>>> ago!
>>>>>>>>>>
>>>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>>>>
>>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>>> IE 8 b2
>>>>>>>>>>>> I'd like a fix for this issue as I tried even removing my
>>>>>>>>>>>> Comodo3
>>>>>>>>>>>> FW
>>>>>>>>>>>> and
>>>>>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>>>>>> microsoft
>>>>>>>>>>>> web
>>>>>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>>>>>> itself.
>>>>>>>>>>>> Contacted the microsoft support without success.
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

I tried with the Windows FW. Same error message. I bought this computer with
Norton on, as a trial. I removed it thoroughly with Norton Removal Tool and
installed AVAST antivirus 1 year ago.
"PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
news:urCLClOGJHA.3288@TK2MSFTNGP03.phx.gbl...
> And if you uninstall Comodo FW and then merely enable the Windows
> Firewall?
>
> Has a Norton or McAfee application ever been installed on the machine?
>
>>>>> I used Comodo beta registry cleaner
>>>>> I'm using MV Reg Clean 5.5
>>>>> I use CCleaner
>>>>> I use Advanced Windows Personal Care
>>>>> I use Glary

>
> Which of the above are still installed and loading at boot?
>
> matthew steward wrote:
>> I'm sorry for me but even this didn't work out. Installation stops at 94%
>> completion before failing. Tried deactivating all my security app.
>> SpywareBlaster too but with same results.
>>
>>
>> "matthew steward" <matt@hotmail.com> a écrit dans le message de
>> news:uOVz5HGGJHA.4228@TK2MSFTNGP05.phx.gbl...
>>> Actually, I've got a personnal message from a friend that installed the
>>> patch on 2 PCs with IE8b2 on and PCTOOLS FW instead of COMODO3 FW. Since
>>> COMODO already did this to me in the past, I'm going to remove it all
>>> cleanly and that is my last chance. I'll keep IE8 b2 because I like it
>>> better than IE7 and it's stable. I'll let you know.
>>> "PA Bear [MS MVP]" <PABearMVP@gmail.com> a écrit dans le message de
>>> news:e87h20AGJHA.612@TK2MSFTNGP06.phx.gbl...
>>>> [X-post to IE Beta newsgroup]
>>>>
>>>>> I use a lot of registry cleaners:
>>>>> I used Comodo beta registry cleaner
>>>>> I'm using MV Reg Clean 5.5
>>>>> I use CCleaner
>>>>> I use Advanced Windows Personal Care [OneCare?]
>>>>> I use Glary
>>>>> I use Auslogic Registry Defragmentor;
>>>>
>>>> Think your Registry needs "cleaning" or "repairing"? Read
>>>> http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
>>>>
>>>> Any one of the above deleted the IE8 Beta 2 uninstall files. Without
>>>> this data, you cannot uninstall IE8 Beta 2. The only way to remove IE8
>>>> Beta 2 now is to format & reinstall Vista and all Vista updates
>>>> including
>>>> Vista SP1 (if the machine didn't come with Vista SP1 preinstalled).
>>>>
>>>> On the other hand, you should be able to install IE8 final release.
>>>>
>>>> NB: The free IE8 Beta Support for US and CA residents
>>>> (http://support.microsoft.com/oas/default.aspx?prid=12357) is going to
>>>> tell you the same thing so don't bother calling.
>>>>
>>>> ==================================
>>>>
>>>> Off Topic: I'd advise you to disable email scanning by your anti-virus
>>>> application to avoid Windows Mail problems. It provides no additional
>>>> protection and even Symantec says it's not necessary:
>>>>
>>>> <QP>
>>>> Disabling Email Scanning does not leave you unprotected against viruses
>>>> that are distributed as email attachments. Norton AntiVirus
>>>> Auto-Protect
>>>> scans incoming files as they are saved to your hard drive, including
>>>> email and email attachments. Email Scanning is just another layer on
>>>> top
>>>> of this. To make sure that Auto-Protect is providing the maximum
>>>> protection, keep Auto-Protect enabled and run LiveUpdate regularly to
>>>> ensure that you have the most recent virus definitions.
>>>> </QP>
>>>> http://service1.symantec.com/SUPPORT/nav.nsf/docid/2002111812533106
>>>> --
>>>> ~Robear Dyer (PA Bear)
>>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>>>> AumHa VSOP & Admin http://aumha.net
>>>> DTS-L http://dts-l.net/
>>>>
>>>>
>>>> matthew steward wrote:
>>>>> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED
>>>>> CORRECTLY"
>>>>> whenever I try to uninstall IE 8 b2
>>>>> I installed IE8 b2 after installing Vista SP1 (from Vista Home
>>>>> Premium)
>>>>> but
>>>>> from IE 7;
>>>>> I use a lot of registry cleaners:
>>>>> I used Comodo beta registry cleaner
>>>>> I'm using MV Reg Clean 5.5
>>>>> I use CCleaner
>>>>> I use Advanced Windows Personal Care
>>>>> I use Glary
>>>>> I use Auslogic Registry Defragmentor;
>>>>> I'm going to post. I'm a CA resident
>>>>>
>>>>> "PA Bear [MS MVP]" wrote:
>>>>>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed
>>>>>> Vista
>>>>>> SP1:
>>>>>>
>>>>>> => Post the verbatim error message you get when trying to uninstall
>>>>>> IE8
>>>>>> Beta 2.
>>>>>>
>>>>>> => See both parts of the section "How to uninstall Internet Explorer
>>>>>> 8
>>>>>> Beta 2" here: http://support.microsoft.com/kb/949787
>>>>>>
>>>>>> => Do you use a "Registry cleaner"? Have you used one since you
>>>>>> installed
>>>>>> IE8 Beta 2? If so, you're out of luck.
>>>>>>
>>>>>> => Post about this issue in the IE Beta newsgroup:
>>>>>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>>>>>
>>>>>> NB: The only IE8 Beta support for non-US/CA residents is in that
>>>>>> newsgroup. You may end up having to reinstall Vista; such are the
>>>>>> risks
>>>>>> of
>>>>>> installing beta software.
>>>>>>
>>>>>> The only possibly good news in all of this is that you should be able
>>>>>> to
>>>>>> install the final release of IE8.
>>>>>>
>>>>>> matthew steward wrote:
>>>>>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall
>>>>>>> the
>>>>>>> update but it doesn't work. The uninstall can't complete.
>>>>>>>
>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>> [Such inline, cut/paste replies are not helpful.]
>>>>>>>>
>>>>>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you
>>>>>>>> installed
>>>>>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be able
>>>>>>>> to
>>>>>>>> uninstall IE8 Beta 2.
>>>>>>>>
>>>>>>>> matthew steward wrote:
>>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>>> IE8
>>>>>>>>> Beta
>>>>>>>>> 1,
>>>>>>>>> you will be able to uninstall IE8 Beta 2.
>>>>>>>>> Well, I have an error message telling me the uninstallation
>>>>>>>>> aborted
>>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>>> enabling
>>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>>
>>>>>>>>> No
>>>>>>>>> 2. Are you getting an error similar to "configuring updates stage
>>>>>>>>> 3
>>>>>>>>> of
>>>>>>>>> 3.
>>>>>>>>> 0%
>>>>>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>> No
>>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>>>>>
>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>
>>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>>> protection"
>>>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>>>> Windows
>>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>>>> build?
>>>>>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>>>>>> AVAST
>>>>>>>>> and
>>>>>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>>>>>> A-2antimalware
>>>>>>>>> are
>>>>>>>>> loading services the same when windows start but I did not check
>>>>>>>>> in
>>>>>>>>> Process
>>>>>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>>>>>> on-demand
>>>>>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's
>>>>>>>>> the
>>>>>>>>> problem.
>>>>>>>>>
>>>>>>>>> I'd say it's IE9 b2 and would like to know how to get back to IE7.
>>>>>>>>> I
>>>>>>>>> tried
>>>>>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>>>>>
>>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>>
>>>>>>>>>> 5. Explain.
>>>>>>>>>>
>>>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>>> Vista |
>>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>> Yes, Support there is slow and non-efficient. I emailed the guy
>>>>>>>>> and
>>>>>>>>> wait
>>>>>>>>> for
>>>>>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>>>>>
>>>>>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and
>>>>>>>>>> then
>>>>>>>>>> installed IE8 Beta 2, you're right: You won't be able to
>>>>>>>>>> uninstall
>>>>>>>>>> IE8
>>>>>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>>>>>
>>>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>>>> IE8
>>>>>>>>>> Beta
>>>>>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>>>>>
>>>>>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>>>>>> install
>>>>>>>>>> IE8 Final Release.
>>>>>>>>>>
>>>>>>>>>> Back to your problem, please answer the following by number, not
>>>>>>>>>> inline...
>>>>>>>>>>
>>>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>>>> enabling
>>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>>>
>>>>>>>>>> 2. Are you getting an error similar to "configuring updates stage
>>>>>>>>>> 3
>>>>>>>>>> of
>>>>>>>>>> 3.
>>>>>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>>>
>>>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>>>
>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>
>>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>>> protection"
>>>>>>>>>> components/services of all anti-spyware applications) and was the
>>>>>>>>>> Windows
>>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8 Beta
>>>>>>>>>> build?
>>>>>>>>>>
>>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>>
>>>>>>>>>> 5. Explain.
>>>>>>>>>>
>>>>>>>>>> Unlimited installation and compatibility support for Vista SP1 is
>>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>>> Vista |
>>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>>>
>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back to
>>>>>>>>>>> IE7!!!
>>>>>>>>>>> Not to my knowledge. They warned me before installing it 4-5
>>>>>>>>>>> weeks
>>>>>>>>>>> ago!
>>>>>>>>>>>
>>>>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>>>>>
>>>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>>>> IE 8 b2
>>>>>>>>>>>>> I'd like a fix for this issue as I tried even removing my
>>>>>>>>>>>>> Comodo3
>>>>>>>>>>>>> FW
>>>>>>>>>>>>> and
>>>>>>>>>>>>> with resident protection AV OFF and downloading the setup from
>>>>>>>>>>>>> microsoft
>>>>>>>>>>>>> web
>>>>>>>>>>>>> sites but it just won't install and constantly asks to install
>>>>>>>>>>>>> itself.
>>>>>>>>>>>>> Contacted the microsoft support without success.

>
>
>
> ---
> Antivirus avast! : message Entrant sain.
> Base de donnees virale (VPS) : 080917-0, 2008-09-17
> Analyse le : 2008-09-17 22:49:16
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
>




---
Antivirus avast! : message Sortant sain.
Base de donnees virale (VPS) : 080917-0, 2008-09-17
Analyse le : 2008-09-17 22:51:13
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

I'd format and reinstall Vista if I were you, Matthew.

I have nothing further to add to this conversation.
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

matthew steward wrote:
> I tried with the Windows FW. Same error message. I bought this computer
> with
> Norton on, as a trial. I removed it thoroughly with Norton Removal Tool
> and
> installed AVAST antivirus 1 year ago.
>
>> And if you uninstall Comodo FW and then merely enable the Windows
>> Firewall?
>>
>> Has a Norton or McAfee application ever been installed on the machine?
>>
>>>>>> I used Comodo beta registry cleaner
>>>>>> I'm using MV Reg Clean 5.5
>>>>>> I use CCleaner
>>>>>> I use Advanced Windows Personal Care
>>>>>> I use Glary

>>
>> Which of the above are still installed and loading at boot?
>>
>> matthew steward wrote:
>>> I'm sorry for me but even this didn't work out. Installation stops at
>>> 94%
>>> completion before failing. Tried deactivating all my security app.
>>> SpywareBlaster too but with same results.
>>>
>>>> Actually, I've got a personnal message from a friend that installed the
>>>> patch on 2 PCs with IE8b2 on and PCTOOLS FW instead of COMODO3 FW.
>>>> Since
>>>> COMODO already did this to me in the past, I'm going to remove it all
>>>> cleanly and that is my last chance. I'll keep IE8 b2 because I like it
>>>> better than IE7 and it's stable. I'll let you know.
>>>>
>>>> "PA Bear [MS MVP]" wrote:
>>>>> [X-post to IE Beta newsgroup]
>>>>>
>>>>>> I use a lot of registry cleaners:
>>>>>> I used Comodo beta registry cleaner
>>>>>> I'm using MV Reg Clean 5.5
>>>>>> I use CCleaner
>>>>>> I use Advanced Windows Personal Care [OneCare?]
>>>>>> I use Glary
>>>>>> I use Auslogic Registry Defragmentor;
>>>>>
>>>>> Think your Registry needs "cleaning" or "repairing"? Read
>>>>> http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
>>>>>
>>>>> Any one of the above deleted the IE8 Beta 2 uninstall files. Without
>>>>> this data, you cannot uninstall IE8 Beta 2. The only way to remove
>>>>> IE8
>>>>> Beta 2 now is to format & reinstall Vista and all Vista updates
>>>>> including
>>>>> Vista SP1 (if the machine didn't come with Vista SP1 preinstalled).
>>>>>
>>>>> On the other hand, you should be able to install IE8 final release.
>>>>>
>>>>> NB: The free IE8 Beta Support for US and CA residents
>>>>> (http://support.microsoft.com/oas/default.aspx?prid=12357) is going to
>>>>> tell you the same thing so don't bother calling.
>>>>>
>>>>> ==================================
>>>>>
>>>>> Off Topic: I'd advise you to disable email scanning by your anti-virus
>>>>> application to avoid Windows Mail problems. It provides no additional
>>>>> protection and even Symantec says it's not necessary:

<snip>
>>>>> matthew steward wrote:
>>>>>> I get: "AN ERROR HAS HAPPENED. SOME UPDATES WEREN'T UNINSTALLED
>>>>>> CORRECTLY"
>>>>>> whenever I try to uninstall IE 8 b2
>>>>>> I installed IE8 b2 after installing Vista SP1 (from Vista Home
>>>>>> Premium)
>>>>>> but
>>>>>> from IE 7;
>>>>>> I use a lot of registry cleaners:
>>>>>> I used Comodo beta registry cleaner
>>>>>> I'm using MV Reg Clean 5.5
>>>>>> I use CCleaner
>>>>>> I use Advanced Windows Personal Care
>>>>>> I use Glary
>>>>>> I use Auslogic Registry Defragmentor;
>>>>>> I'm going to post. I'm a CA resident
>>>>>>
>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>> Assuming that means you installed IE8 Beta 2 AFTER you'd installed
>>>>>>> Vista
>>>>>>> SP1:
>>>>>>>
>>>>>>> => Post the verbatim error message you get when trying to uninstall
>>>>>>> IE8
>>>>>>> Beta 2.
>>>>>>>
>>>>>>> => See both parts of the section "How to uninstall Internet Explorer
>>>>>>> 8
>>>>>>> Beta 2" here: http://support.microsoft.com/kb/949787
>>>>>>>
>>>>>>> => Do you use a "Registry cleaner"? Have you used one since you
>>>>>>> installed
>>>>>>> IE8 Beta 2? If so, you're out of luck.
>>>>>>>
>>>>>>> => Post about this issue in the IE Beta newsgroup:
>>>>>>> news://msnews.microsoft.com/microsoft.public.internetexplorer.beta
>>>>>>>
>>>>>>> NB: The only IE8 Beta support for non-US/CA residents is in that
>>>>>>> newsgroup. You may end up having to reinstall Vista; such are the
>>>>>>> risks
>>>>>>> of
>>>>>>> installing beta software.
>>>>>>>
>>>>>>> The only possibly good news in all of this is that you should be
>>>>>>> able
>>>>>>> to
>>>>>>> install the final release of IE8.
>>>>>>>
>>>>>>> matthew steward wrote:
>>>>>>>> I installed IE8 b2 from IE7 on Vista SP1 and I tried to uninstall
>>>>>>>> the
>>>>>>>> update but it doesn't work. The uninstall can't complete.
>>>>>>>>
>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>> [Such inline, cut/paste replies are not helpful.]
>>>>>>>>>
>>>>>>>>> If you, in fact, installed IE8 Beta 1 or Beta 2 *before* you
>>>>>>>>> installed
>>>>>>>>> Vista SP1, you'll have to uninstall Vista SP1 before you'll be
>>>>>>>>> able
>>>>>>>>> to
>>>>>>>>> uninstall IE8 Beta 2.
>>>>>>>>>
>>>>>>>>> matthew steward wrote:
>>>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>>>> IE8
>>>>>>>>>> Beta
>>>>>>>>>> 1,
>>>>>>>>>> you will be able to uninstall IE8 Beta 2.
>>>>>>>>>> Well, I have an error message telling me the uninstallation
>>>>>>>>>> aborted
>>>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND THEN
>>>>>>>>>> enabling
>>>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>>>
>>>>>>>>>> No
>>>>>>>>>> 2. Are you getting an error similar to "configuring updates stage
>>>>>>>>>> 3
>>>>>>>>>> of
>>>>>>>>>> 3.
>>>>>>>>>> 0%
>>>>>>>>>>> complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>>> No
>>>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>>> Via Automatic Updates (Windows Update, had no problem with it)
>>>>>>>>>>
>>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>>
>>>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>>>> protection"
>>>>>>>>>>> components/services of all anti-spyware applications) and was
>>>>>>>>>>> the
>>>>>>>>>>> Windows
>>>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8
>>>>>>>>>>> Beta
>>>>>>>>>>> build?
>>>>>>>>>> I'm on Vista Sp!, I upgraded from Vista Home Premium. I only have
>>>>>>>>>> AVAST
>>>>>>>>>> and
>>>>>>>>>> SpySweeper on RP and they were all turned off. Now ST and
>>>>>>>>>> A-2antimalware
>>>>>>>>>> are
>>>>>>>>>> loading services the same when windows start but I did not check
>>>>>>>>>> in
>>>>>>>>>> Process
>>>>>>>>>> manager. I can only say their RP is turned OFF as I run them as
>>>>>>>>>> on-demand
>>>>>>>>>> scanners. Spywareblaster wasn't disabled but I don,t think it's
>>>>>>>>>> the
>>>>>>>>>> problem.
>>>>>>>>>>
>>>>>>>>>> I'd say it's IE9 b2 and would like to know how to get back to
>>>>>>>>>> IE7.
>>>>>>>>>> I
>>>>>>>>>> tried
>>>>>>>>>> uninstalling this update in Safe Mode with the same bad result.
>>>>>>>>>>
>>>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>>>
>>>>>>>>>>> 5. Explain.
>>>>>>>>>>>
>>>>>>>>>>> Unlimited installation and compatibility support for Vista SP1
>>>>>>>>>>> is
>>>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>>>> Vista |
>>>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>>> Yes, Support there is slow and non-efficient. I emailed the guy
>>>>>>>>>> and
>>>>>>>>>> wait
>>>>>>>>>> for
>>>>>>>>>> an answer but I am hoping faster solutions in this newsgroup
>>>>>>>>>>
>>>>>>>>>>> 1. If you installed IE8 Beta 1, then installed Vista SP1, and
>>>>>>>>>>> then
>>>>>>>>>>> installed IE8 Beta 2, you're right: You won't be able to
>>>>>>>>>>> uninstall
>>>>>>>>>>> IE8
>>>>>>>>>>> Beta 2 or IE8 Beta 1 without first uninstalling Vista SP1.
>>>>>>>>>>>
>>>>>>>>>>> 2. If, however, you installed Vista SP1 without having installed
>>>>>>>>>>> IE8
>>>>>>>>>>> Beta
>>>>>>>>>>> 1, you will be able to uninstall IE8 Beta 2.
>>>>>>>>>>>
>>>>>>>>>>> If #1 is the case, the only good news is that you'll be able to
>>>>>>>>>>> install
>>>>>>>>>>> IE8 Final Release.
>>>>>>>>>>>
>>>>>>>>>>> Back to your problem, please answer the following by number, not
>>>>>>>>>>> inline...
>>>>>>>>>>>
>>>>>>>>>>> 1. Does disabling (or even uninstalling) Comodo Firewall AND
>>>>>>>>>>> THEN
>>>>>>>>>>> enabling
>>>>>>>>>>> the Windows Firewall allow KB955302 to install?
>>>>>>>>>>>
>>>>>>>>>>> 2. Are you getting an error similar to "configuring updates
>>>>>>>>>>> stage
>>>>>>>>>>> 3
>>>>>>>>>>> of
>>>>>>>>>>> 3.
>>>>>>>>>>> 0% complete"? (cf. http://support.microsoft.com/kb/949358)
>>>>>>>>>>>
>>>>>>>>>>> 3. Did you install Vista SP1 via Windows Update or manually?
>>>>>>>>>>>
>>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>>
>>>>>>>>>>> 4. Were all of the above fully disabled (including "real-time
>>>>>>>>>>> protection"
>>>>>>>>>>> components/services of all anti-spyware applications) and was
>>>>>>>>>>> the
>>>>>>>>>>> Windows
>>>>>>>>>>> Firewall enabled when you installed WinXP SP3 and/or any IE8
>>>>>>>>>>> Beta
>>>>>>>>>>> build?
>>>>>>>>>>>
>>>>>>>>>>>>>> Contacted the microsoft support without success.
>>>>>>>>>>>
>>>>>>>>>>> 5. Explain.
>>>>>>>>>>>
>>>>>>>>>>> Unlimited installation and compatibility support for Vista SP1
>>>>>>>>>>> is
>>>>>>>>>>> available at no charge through 18 Mar-09. Go to
>>>>>>>>>>> http://support.microsoft.com/oas/default.aspx | select Windows
>>>>>>>>>>> Vista |
>>>>>>>>>>> select Windows Vista Service Pack 1
>>>>>>>>>>>
>>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>>> You just can't uninstall IE8 b2 update. Impossible to go back
>>>>>>>>>>>> to
>>>>>>>>>>>> IE7!!!
>>>>>>>>>>>> Not to my knowledge. They warned me before installing it 4-5
>>>>>>>>>>>> weeks
>>>>>>>>>>>> ago!
>>>>>>>>>>>>
>>>>>>>>>>>> "PA Bear [MS MVP]" wrote:
>>>>>>>>>>>>> Uninstall IE8 Beta 2 then try again.
>>>>>>>>>>>>>
>>>>>>>>>>>>> matthew steward wrote:
>>>>>>>>>>>>>> ACER DESKTOP 1GB RAM, 320 GB HD, 1.6 GHZ.
>>>>>>>>>>>>>> Comodo 3 FW (v.378)
>>>>>>>>>>>>>> AVAST HOME EDITION v. 4.8.1229
>>>>>>>>>>>>>> SpySweeper v. 5.8 (build 55)
>>>>>>>>>>>>>> ST, SAS, A2antimalware on demand scanners
>>>>>>>>>>>>>> SpywareBlaster 4.1
>>>>>>>>>>>>>> IE 8 b2
>>>>>>>>>>>>>> I'd like a fix for this issue as I tried even removing my
>>>>>>>>>>>>>> Comodo3
>>>>>>>>>>>>>> FW
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> with resident protection AV OFF and downloading the setup
>>>>>>>>>>>>>> from
>>>>>>>>>>>>>> microsoft
>>>>>>>>>>>>>> web
>>>>>>>>>>>>>> sites but it just won't install and constantly asks to
>>>>>>>>>>>>>> install
>>>>>>>>>>>>>> itself.
>>>>>>>>>>>>>> Contacted the microsoft support without success.

>>
>>
>>
>> ---
>> Antivirus avast! : message Entrant sain.
>> Base de donnees virale (VPS) : 080917-0, 2008-09-17
>> Analyse le : 2008-09-17 22:49:16
>> avast! - copyright (c) 1988-2008 ALWIL Software.
>> http://www.avast.com
>>
>>
>>

>
>
>
> ---
> Antivirus avast! : message Sortant sain.
> Base de donnees virale (VPS) : 080917-0, 2008-09-17
> Analyse le : 2008-09-17 22:51:13
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

"matthew steward" <matt@hotmail.com> wrote in message
news:eOFoq1IGJHA.1456@TK2MSFTNGP03.phx.gbl...

> Installation stops at 94% completion before failing.



Try some diagnosis? Have you looked at the logs which the install process creates for clues?
You could use ProcMon to supplement them if necessary.


---
 
Re: KB 955302 error code 8007371C failure in VISTA SP1 32 BITS

Robert Aldwinckle wrote:
> "matthew steward" wrote:
>> Installation stops at 94% completion before failing.

>
> Try some diagnosis? Have you looked at the logs which the install
> process
> creates for clues? You could use ProcMon to supplement them if
> necessary.


Robert, have you read this entire thread? Have you seen all of the Registry
cleaners this OP has used?

http://groups.google.com/group/microsoft.public.windowsupdate/browse_frm/thread/3940a9a96ef5e965 &
ff
 
Back
Top