NTP Server did not respond

  • Thread starter Thread starter Bruce
  • Start date Start date
B

Bruce

Guest
I am receiving a NTP Server did not respond, w32time event ID 11. I have
searched the support site and found the error but did not locate how I can
remedy this situation. I am running Windows Server 2000, service pack 4 with
all the latest Microsoft updates. This is a domain controller (one of three,
two of the domain controllers are windows 2000 and one is 2003).

Any suggestions would be greatly appreciated.
--
Bruce
 
Re: NTP Server did not respond

Hello Bruce,

Is this one the PDCEmulator?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> I am receiving a NTP Server did not respond, w32time event ID 11. I
> have searched the support site and found the error but did not locate
> how I can remedy this situation. I am running Windows Server 2000,
> service pack 4 with all the latest Microsoft updates. This is a domain
> controller (one of three, two of the domain controllers are windows
> 2000 and one is 2003).
>
> Any suggestions would be greatly appreciated.
>
 
Re: NTP Server did not respond

Yes it is.
--
Bruce


"Meinolf Weber" wrote:

> Hello Bruce,
>
> Is this one the PDCEmulator?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > I am receiving a NTP Server did not respond, w32time event ID 11. I
> > have searched the support site and found the error but did not locate
> > how I can remedy this situation. I am running Windows Server 2000,
> > service pack 4 with all the latest Microsoft updates. This is a domain
> > controller (one of three, two of the domain controllers are windows
> > 2000 and one is 2003).
> >
> > Any suggestions would be greatly appreciated.
> >
>
>
>
 
Re: NTP Server did not respond

Meinolf,

Were you able to come up with a possible solution to my problem?


--
Bruce


"Meinolf Weber" wrote:

> Hello Bruce,
>
> Is this one the PDCEmulator?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > I am receiving a NTP Server did not respond, w32time event ID 11. I
> > have searched the support site and found the error but did not locate
> > how I can remedy this situation. I am running Windows Server 2000,
> > service pack 4 with all the latest Microsoft updates. This is a domain
> > controller (one of three, two of the domain controllers are windows
> > 2000 and one is 2003).
> >
> > Any suggestions would be greatly appreciated.
> >
>
>
>
 
Re: NTP Server did not respond

Hello Bruce,

Did you configure it to synchronize with an external time source?

See also here:
http://www.eventid.net/display.asp?eventid=11&eventno=754&source=w32time&phase=1

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Yes it is.
>
> "Meinolf Weber" wrote:
>
>> Hello Bruce,
>>
>> Is this one the PDCEmulator?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I am receiving a NTP Server did not respond, w32time event ID 11. I
>>> have searched the support site and found the error but did not
>>> locate how I can remedy this situation. I am running Windows Server
>>> 2000, service pack 4 with all the latest Microsoft updates. This is
>>> a domain controller (one of three, two of the domain controllers are
>>> windows 2000 and one is 2003).
>>>
>>> Any suggestions would be greatly appreciated.
>>>
 
Re: NTP Server did not respond

Meinolf,

Yes I do, I use atomtime, which updates the system clock on the DC.

--
Bruce


"Meinolf Weber" wrote:

> Hello Bruce,
>
> Did you configure it to synchronize with an external time source?
>
> See also here:
> http://www.eventid.net/display.asp?eventid=11&eventno=754&source=w32time&phase=1
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > Yes it is.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello Bruce,
> >>
> >> Is this one the PDCEmulator?
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> I am receiving a NTP Server did not respond, w32time event ID 11. I
> >>> have searched the support site and found the error but did not
> >>> locate how I can remedy this situation. I am running Windows Server
> >>> 2000, service pack 4 with all the latest Microsoft updates. This is
> >>> a domain controller (one of three, two of the domain controllers are
> >>> windows 2000 and one is 2003).
> >>>
> >>> Any suggestions would be greatly appreciated.
> >>>
>
>
>
 
Re: NTP Server did not respond

Meinolf,

Let me clarify my last statement: I did not configure the DC pre se, I
merely have
Atom Time running and set to update/adjust the system time on a daily basis.
--
Bruce


"Meinolf Weber" wrote:

> Hello Bruce,
>
> Did you configure it to synchronize with an external time source?
>
> See also here:
> http://www.eventid.net/display.asp?eventid=11&eventno=754&source=w32time&phase=1
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > Yes it is.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello Bruce,
> >>
> >> Is this one the PDCEmulator?
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> I am receiving a NTP Server did not respond, w32time event ID 11. I
> >>> have searched the support site and found the error but did not
> >>> locate how I can remedy this situation. I am running Windows Server
> >>> 2000, service pack 4 with all the latest Microsoft updates. This is
> >>> a domain controller (one of three, two of the domain controllers are
> >>> windows 2000 and one is 2003).
> >>>
> >>> Any suggestions would be greatly appreciated.
> >>>
>
>
>
 
Re: NTP Server did not respond

Hello Bruce,

I would recommend to configure the PDCEmulator to an external timesource:
http://technet.microsoft.com/en-us/library/cc786897.aspx

Here you can find a list with time servers:
http://www.pool.ntp.org/

Also check out this one:
http://support.microsoft.com/kb/816042

http://blogs.msdn.com/w32time/default.aspx

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Meinolf,
>
> Let me clarify my last statement: I did not configure the DC pre se, I
> merely have Atom Time running and set to update/adjust the system time
> on a daily basis.
>
> "Meinolf Weber" wrote:
>
>> Hello Bruce,
>>
>> Did you configure it to synchronize with an external time source?
>>
>> See also here:
>> http://www.eventid.net/display.asp?eventid=11&eventno=754&source=w32t
>> ime&phase=1
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Yes it is.
>>>
>>> "Meinolf Weber" wrote:
>>>
>>>> Hello Bruce,
>>>>
>>>> Is this one the PDCEmulator?
>>>>
>>>> Best regards
>>>>
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers
>>>> no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> I am receiving a NTP Server did not respond, w32time event ID 11.
>>>>> I have searched the support site and found the error but did not
>>>>> locate how I can remedy this situation. I am running Windows
>>>>> Server 2000, service pack 4 with all the latest Microsoft updates.
>>>>> This is a domain controller (one of three, two of the domain
>>>>> controllers are windows 2000 and one is 2003).
>>>>>
>>>>> Any suggestions would be greatly appreciated.
>>>>>
 
Re: NTP Server did not respond

Meinolf,

Once again thank you. Will try once I get back into the office on Monday.
--
Bruce


"Meinolf Weber" wrote:

> Hello Bruce,
>
> I would recommend to configure the PDCEmulator to an external timesource:
> http://technet.microsoft.com/en-us/library/cc786897.aspx
>
> Here you can find a list with time servers:
> http://www.pool.ntp.org/
>
> Also check out this one:
> http://support.microsoft.com/kb/816042
>
> http://blogs.msdn.com/w32time/default.aspx
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > Meinolf,
> >
> > Let me clarify my last statement: I did not configure the DC pre se, I
> > merely have Atom Time running and set to update/adjust the system time
> > on a daily basis.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello Bruce,
> >>
> >> Did you configure it to synchronize with an external time source?
> >>
> >> See also here:
> >> http://www.eventid.net/display.asp?eventid=11&eventno=754&source=w32t
> >> ime&phase=1
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> Yes it is.
> >>>
> >>> "Meinolf Weber" wrote:
> >>>
> >>>> Hello Bruce,
> >>>>
> >>>> Is this one the PDCEmulator?
> >>>>
> >>>> Best regards
> >>>>
> >>>> Meinolf Weber
> >>>> Disclaimer: This posting is provided "AS IS" with no warranties,
> >>>> and
> >>>> confers
> >>>> no rights.
> >>>> ** Please do NOT email, only reply to Newsgroups
> >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>>>> I am receiving a NTP Server did not respond, w32time event ID 11.
> >>>>> I have searched the support site and found the error but did not
> >>>>> locate how I can remedy this situation. I am running Windows
> >>>>> Server 2000, service pack 4 with all the latest Microsoft updates.
> >>>>> This is a domain controller (one of three, two of the domain
> >>>>> controllers are windows 2000 and one is 2003).
> >>>>>
> >>>>> Any suggestions would be greatly appreciated.
> >>>>>
>
>
>
 

Similar threads

G
Windows 10 Windows Time Service - Prioritizing NTP Server Polling
Replies
0
Views
109
Gabe808
G
J
Using TLS certificate with Windows 2008 SMTP virtual server
Replies
0
Views
276
JonF2010
J
C
Best Nintendo Switch accessories 2021: How to enhance your system
Replies
0
Views
81
Chris Hachey
C
M
401 1 2148074248 in IIS logs behind a load balancer with multiple servers
Replies
0
Views
282
MattHamrick
M
B
AdomdConnectionException This is usually a temporary error during hostname resolution and means that the local server did not receive a response from
Replies
0
Views
158
bikash shah
B
Back
Top