Computer only registers 16 RAM - have 64

[Jeff Richards]

Re: Computer only registers 16 RAM - have 64


That "Limit Memory To ?" setting is the one that's causing the problem.
You
need to get it unchecked somehow. If you can find a manual for BIOS
setup
it may explain why it's checked and set to 16, and how to clear it.
--
Jeff Richards
MS MVP (Windows - Shell/User)
"NCVET61" <NCVET61@discussions.microsoft.com> wrote in message
news:2F5C002D-76AB-4B4C-8C75-CEDFFAD19145@microsoft.com...
> No where that I can find. f1 setup shows the memory at 16, but it's
"blue"
> and I can not access it to change it there. in MS Config, advance, -
> "limit
> memory to" is checked and has 16. I tried unchecking it, and I tried
> increasing the memory to 64 but to no avail
>


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[philo]

Re: Computer only registers 16 RAM - have 64


"Jeff Richards" <JRichards@msn.com.au> wrote in message
news:OBcwtHunIHA.5280@TK2MSFTNGP02.phx.gbl...
> That "Limit Memory To ?" setting is the one that's causing the
problem.
You
> need to get it unchecked somehow. If you can find a manual for BIOS
setup
> it may explain why it's checked and set to 16, and how to clear it.



Here is an AMI BIOS data sheet someone had posted:

http://www.ecst.csuchico.edu/~dranch/HARDWARE/ami-bios-beeps.txt


Though I agree that *if *the bios has a 16 meg RAM limit setting...that
would be the solution...
There appears to be no such uption. I'd of course have another look in
the
bios at *all* options.

The OP mentioned that he observed that option in msconfig...
which of course is only going to list what the BIOS detects



> Jeff Richards
> MS MVP (Windows - Shell/User)
> "NCVET61" <NCVET61@discussions.microsoft.com> wrote in message
> news:2F5C002D-76AB-4B4C-8C75-CEDFFAD19145@microsoft.com...
> > No where that I can find. f1 setup shows the memory at 16, but it's
"blue"
> > and I can not access it to change it there. in MS Config, advance,
-
> > "limit
> > memory to" is checked and has 16. I tried unchecking it, and I
tried
> > increasing the memory to 64 but to no avail
> >
>
>


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[Ben Myers]

Re: Computer only registers 16 RAM - have 64


"NCVET61" <NCVET61@discussions.microsoft.com> wrote in message
news:AFD335DF-E0C6-40A9-AD88-C331AA0D0FB5@microsoft.com...
> My BIOS battery went dead. When I replaced the battery and started my

> computer, it only registered 16 MB of RAM. I have 64 MB RAM on 2 - 32
banks
> and 2 empty slots. It is an older HP Platinum 40 with W95 whicjh I
had
> upgraded to W98SE2. I can't find anyway to get it to register the 64
MB RAM.
> I tried MS Cong and F1 setup to no avail.

Double-check the memory modules to make sure they are really 32
megabytes. Please note that 32 bit is not the same thing as 32
megabytes.
Also, the 16 megabytes you are seeing may be built into the
motherboard.
To see if this is the case, try booting the computer without the
modules.

Ben


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[Buffalo]

Re: Computer only registers 16 RAM - have 64


NCVET61 wrote:
> It didn't work. I think I'll try to get new memory and see what that
> does. I appreciate everyone's help, THANKS !!!
>
> "Fan924" wrote:
>
>> I believe AMI used the delete key to get into the bios setup.

Have you been able to get into the BIOS yet?


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[Buffalo]

Re: Computer only registers 16 RAM - have 64


NCVET61 wrote:
> It didn't work. I think I'll try to get new memory and see what that
> does. I appreciate everyone's help, THANKS !!!
>
> "Fan924" wrote:
>
>> I believe AMI used the delete key to get into the bios setup.


I would be surprised if the memory went bad. You really need to get
into the
BIOS and set it up, I believe.
If you have your BIOS version and your model number of your PC, the
info on
how to do this is should be available.
One question though, was this computer not in use for years and then
when
you tried it, you found the MB battery dead?
When you get if fixed, please post back.
Thanks


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[philo]

Re: Computer only registers 16 RAM - have 64


"Ben Myers" <benjmyers@mindR-e-m-o-v-Espring.com> wrote in message
news:ehvAxhvnIHA.4712@TK2MSFTNGP04.phx.gbl...
"NCVET61" <NCVET61@discussions.microsoft.com> wrote in message
news:AFD335DF-E0C6-40A9-AD88-C331AA0D0FB5@microsoft.com...
> My BIOS battery went dead. When I replaced the battery and started my
> computer, it only registered 16 MB of RAM. I have 64 MB RAM on 2 - 32
banks
> and 2 empty slots. It is an older HP Platinum 40 with W95 whicjh I
had
> upgraded to W98SE2. I can't find anyway to get it to register the 64
MB
RAM.
> I tried MS Cong and F1 setup to no avail.

Double-check the memory modules to make sure they are really 32
megabytes. Please note that 32 bit is not the same thing as 32
megabytes.
Also, the 16 megabytes you are seeing may be built into the
motherboard.
To see if this is the case, try booting the computer without the
modules.

Ben


I was also thinking that the RAM could have initially failed and caused
the
checksum error...
and it might not have been a bad cmos battery.

Just a though anyway


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[Jeff Richards]

Re: Computer only registers 16 RAM - have 64


MSConfig will report that limit because that's what the BIOS is
initializing
its internal setting to. That setting may or may not correspond to a
specific item in BIOS setup. More likely, it's the result of some
other
setting, for instance assigning video RAM space at 16Mb. If that's
done,
then the BIOS sets the memory limit flag to provide a quick way for any
interrogating code to check whether or not that memory can be used.

The BIOS might also set that limit if the POST RAM test detects
unreliable
memory above 16Mb. That could be because of faulty memory, but it
could
also be because of an I/O card being accidentally mapped into memory
space.
--
Jeff Richards
MS MVP (Windows - Shell/User)
"philo" <philo@privacy.net> wrote in message
news:ezp5kXunIHA.4964@TK2MSFTNGP02.phx.gbl...
>
> "Jeff Richards" <JRichards@msn.com.au> wrote in message
> news:OBcwtHunIHA.5280@TK2MSFTNGP02.phx.gbl...
>> That "Limit Memory To ?" setting is the one that's causing the
problem.
> You
>> need to get it unchecked somehow. If you can find a manual for BIOS
>> setup
>> it may explain why it's checked and set to 16, and how to clear it.
>
>
>
> Here is an AMI BIOS data sheet someone had posted:
>
> http://www.ecst.csuchico.edu/~dranch/HARDWARE/ami-bios-beeps.txt
>
>
> Though I agree that *if *the bios has a 16 meg RAM limit
setting...that
> would be the solution...
> There appears to be no such uption. I'd of course have another look
in the
> bios at *all* options.
>
> The OP mentioned that he observed that option in msconfig...
> which of course is only going to list what the BIOS detects
>
>
>
>> Jeff Richards
>> MS MVP (Windows - Shell/User)
>> "NCVET61" <NCVET61@discussions.microsoft.com> wrote in message
>> news:2F5C002D-76AB-4B4C-8C75-CEDFFAD19145@microsoft.com...
>> > No where that I can find. f1 setup shows the memory at 16, but
it's
> "blue"
>> > and I can not access it to change it there. in MS Config, advance,
-
>> > "limit
>> > memory to" is checked and has 16. I tried unchecking it, and I
tried
>> > increasing the memory to 64 but to no avail
>> >
>>
>>
>
>


--

Posted via http://computerhelpforums.net Forum to USENET Gateway

 

[philo]

Re: Computer only registers 16 RAM - have 64


"Jeff Richards" <JRichards@msn.com.au> wrote in message
news:exE1OW6nIHA.4232@TK2MSFTNGP04.phx.gbl...
> MSConfig will report that limit because that's what the BIOS is
initializing
> its internal setting to. That setting may or may not correspond to a
> specific item in BIOS setup. More likely, it's the result of some
other
> setting, for instance assigning video RAM space at 16Mb. If that's
done,
> then the BIOS sets the memory limit flag to provide a quick way for
any
> interrogating code to check whether or not that memory can be used.
>
> The BIOS might also set that limit if the POST RAM test detects
unreliable
> memory above 16Mb. That could be because of faulty memory, but it
could
> also be because of an I/O card being accidentally mapped into memory
space.
>


Yep...without being in front of the machine it's hard to say exactly
what
happened...
If that machine was in front of me...I'd methodically check the bios
and go
right down the line checking
every possible setting...


--

Posted via http://computerhelpforums.net Forum to USENET Gateway